WORKPRO 20V 4.0Ah Lithium-Ion Battery

giriiş

Thank you for choosing the WORKPRO 20V 4.0Ah Lithium-Ion Battery. This battery is designed to provide reliable power for your WORKPRO 20V cordless power tools. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your battery.

Güvenlik Bilgileri

Always observe the following safety precautions when using, charging, or storing your battery:

• Use only with compatible WORKPRO 20V chargers and tools.
• Pili suya, neme veya aşırı sıcaklıklara maruz bırakmayın.
• Pil terminallerinde kısa devre yapmaktan kaçının.
• Pil takımını sökmeye, açmaya veya bakımını yapmaya çalışmayın.
• Protect against incorrect voltage, overcharge, and internal overheating. The battery features built-in protection functions.
• Pili doğrudan güneş ışığından ve ısı kaynaklarından uzakta, serin ve kuru bir yerde saklayın.
• Pilleri yerel yönetmeliklere uygun şekilde, sorumlu bir biçimde imha edin. Evsel atıklarla birlikte atmayın.

Ürün Bittiview

The WORKPRO 20V 4.0Ah Lithium-Ion Battery is a high-quality, rechargeable power source for your cordless tools. It weighs approximately 700g and contains 10 individual 3.7V 18650-4000mAh Lithium-ion cells.

Ön taraf view of the WORKPRO 20V 4.0Ah Lithium-Ion Battery, showcasing its compact design and power indicator lights.

An exploded diagram illustrating the internal components of the WORKPRO 20V 4.0Ah Lithium-Ion Battery, including individual battery cells and circuit board.

Güç Göstergesi

The battery is equipped with 4 LED indicator lights that show the real-time charge status. Simply press the power indicator button to check the remaining battery life.

Yakın çekim view of a finger pressing the power indicator button on the WORKPRO 20V 4.0Ah Lithium-Ion Battery, showing the illuminated charge status lights.

Kurulum ve Yükleme

To install or remove the battery from your WORKPRO 20V cordless tool:

1. Aletin kapalı olduğundan ve herhangi bir güç kaynağından bağlantısının kesildiğinden emin olun.
2. Pili, alet üzerindeki pil yuvasıyla hizalayın.
3. Press the release button (if applicable) on the battery or tool, and slide the battery firmly into place until it clicks.
4. Çıkarmak için, serbest bırakma düğmesine basın ve pili dışarı kaydırın.

An image demonstrating the process of installing or removing the WORKPRO 20V 4.0Ah Lithium-Ion Battery from a compatible power tool by pressing the release button.

Uyumluluk

This battery is exclusively compatible with the WORKPRO 20V cordless power tool series, including but not limited to:

• Matkaplar
• Darbeli Sürücüler
• Darbeli Anahtarlar
• Açı Öğütücüler
• Alternatif Hareketli Testereler
• Çit Düzelticiler
• Direk Testereleri
• And other WORKPRO 20V tools (e.g., W004578AU, W122039AU, W125049AU, W125062AU, W159007AU, W159009AU).

The WORKPRO 20V 4.0Ah Lithium-Ion Battery centrally placed, surrounded by various compatible WORKPRO 20V cordless power tools such as drills, impact drivers, and hedge trimmers, illustrating its versatility.

Kullanım Talimatları

Pilin Şarj Edilmesi

To charge your WORKPRO 20V 4.0Ah Lithium-Ion Battery:

1. Ensure you are using an official WORKPRO 20V battery charger.
2. Şarj cihazını uygun bir elektrik prizine bağlayın.
3. Slide the battery onto the charger until it is securely seated.
4. Şarj cihazının gösterge ışıkları şarj durumunu gösterecektir. Belirli ışık desenleri için şarj cihazınızın kullanım kılavuzuna bakın.
5. Once fully charged, remove the battery from the charger. Do not leave the battery on the charger for extended periods after it is fully charged.

The battery has no memory effect, allowing it to be charged freely without needing to be fully discharged first.

Bakım ve Depolama

Proper maintenance and storage will extend the life of your battery:

• Temizlik: Keep the battery terminals clean and free of debris. Use a dry cloth to wipe the battery exterior.
• Depolamak: For long-term storage, store the battery in a cool, dry place, ideally at room temperature (20-25°C or 68-77°F). Store the battery with a partial charge (around 50%) rather than fully charged or fully discharged.
• Sıcaklık: Avoid storing or operating the battery in extreme hot or cold conditions.
• Düzenli Kullanım: If storing for extended periods, it is recommended to charge the battery to about 50% every 3-6 months to prevent deep discharge.

Sorun giderme

Özellikler

Garanti ve Destek

For warranty information or technical support, please refer to the documentation included with your original purchase or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official WORKPRO websiteyi ziyaret edin veya müşteri destek kanallarıyla iletişime geçin.