ZYXEL GS2220-28HP 24 Port GB L2 POE+ Switch Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of the ZYXEL GS2220-28HP 24 Port GB L2 POE+ Switch. This device is designed to provide reliable and high-performance network connectivity with Power over Ethernet (PoE+) capabilities, suitable for various network environments.

2. Güvenlik Bilgileri

• Elektrik çarpmasını önlemek için topraklamanın uygun olduğundan emin olun.
• Cihazı suya veya aşırı neme maruz bırakmayın.
• Cihazı belirtilen sıcaklık ve nem aralıklarında çalıştırın.
• Yalnızca cihazla birlikte verilen güç adaptörünü veya onaylanmış bir yedek adaptörü kullanın.
• Cihazı açmayınasing; tüm servis işlemlerini kalifiye personele yaptırın.
• Aşırı ısınmayı önlemek için havalandırma açıklıklarını tıkamaktan kaçının.

3. Paket İçeriği

Paketinizin aşağıdaki öğeleri içerdiğini doğrulayın:

• ZYXEL GS2220-28HP 24 Port GB L2 POE+ Switch
• Güç Kablosu
• Raf montaj kiti (braketler ve vidalar)
• Konsol Kablosu (RJ45 - DB9)
• Hızlı Başlangıç ​​Kılavuzu

4. Ürün Bittiview

The ZYXEL GS2220-28HP is a high-performance Layer 2 Gigabit PoE+ switch designed for robust network deployments. It features 24 Gigabit Ethernet PoE+ ports and additional SFP ports for fiber uplinks.

4.1 Ön Panel

The front panel of the GS2220-28HP switch displays the 24 Gigabit Ethernet ports, four combo RJ-45/SFP ports, and two additional SFP ports. It also includes various LED indicators for power, system status, link/activity, and PoE status for each port. A console port is located on the far right for direct management access.

4.2 Arka Panel

The rear panel of the GS2220-28HP switch features the AC power input connector and a grounding screw for electrical safety.

4.3 Yönetim Seçenekleri

The GS2220-28HP switch supports multiple management options including Cloud-based management, Standalone web interface, and SNMP for integration into network management systems.

4.4 PoE Budget Efficiency

The ZYXEL GS2220 series switches are designed for efficient power delivery, allowing more Power over Ethernet (PoE) devices to be powered from the same PoE budget compared to other switches.

4.5 Bağlantı Noktası Yapılandırması

The switch features both Combo ports (RJ-45/SFP) which can operate as either copper or fiber, and dedicated Additional SFP ports for flexible uplink and fiber connectivity options.

5. Kurulum

5.1 Raf Montajı

1. Birlikte verilen vidaları kullanarak, verilen raf montaj braketlerini anahtarın yan taraflarına takın.
2. Anahtarı, uygun raf vidalarını kullanarak standart 19 inçlik bir ekipman rafına sabitleyin.

5.2 Gücün Bağlanması

1. Güç kablosunun bir ucunu şalterin arka panelindeki AC güç girişine bağlayın.
2. Connect the other end of the power cord to a suitable AC power outlet.
3. Ensure the grounding screw on the rear panel is properly connected to an earth ground.

5.3 Ağ Aygıtlarını Bağlama

1. Connect network devices (e.g., computers, servers, access points, IP cameras) to the RJ-45 ports on the front panel using standard Ethernet cables.
2. For fiber optic connections, insert compatible SFP transceivers into the SFP ports and connect fiber optic cables.
3. For PoE-powered devices, ensure they are connected to PoE+ enabled ports. The switch will automatically detect and provide power.

5.4 İlk Yapılandırma

Anahtar, aşağıdaki yollarla yapılandırılabilir: webKonsol portu üzerinden grafiksel kullanıcı arayüzü (GUI) veya komut satırı arayüzü (CLI) tabanlı bir sistem kullanılabilir.

• Web Grafiksel Kullanıcı Arayüzü: Connect a computer to any of the switch's data ports. Configure your computer's IP address to be in the same subnet as the switch's default IP (refer to the Quick Start Guide for default IP). Open a web Tarayıcıya girin ve anahtarın IP adresini yazın.
• CLI: Connect the console cable from your computer's serial port to the switch's console port. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the correct serial port settings (e.g., 115200 bps, 8 data bits, no parity, 1 stop bit, no flow control).

6. Çalıştırma

6.1 Açma

After connecting the power, the switch will automatically power on. The system LED will indicate the boot status.

6.2 LED Göstergeleri

6.3 PoE Functionality

The GS2220-28HP supports IEEE 802.3at PoE+ standard, providing up to 30W per port for compatible devices. The switch automatically detects PoE-capable devices and supplies power. You can monitor and manage PoE settings through the web GUI veya CLI.

7. Bakım

7.1 Firmware Güncellemesi

Regularly check the ZYXEL website for the latest firmware updates. Updating the firmware ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware download for the update process, typically performed via the web GUI.

7.2 Temizlik

Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3 Çevresel Hususlar

Maintain the operating environment within the specified temperature and humidity ranges to ensure long-term reliability of the device.

8. Sorun Giderme

• Güç Yok: Güç kablosunun hem anahtara hem de çalışan bir elektrik prizine güvenli bir şekilde bağlı olduğundan emin olun. Güç kaynağını kontrol edin.
• Bağlantı Işığı Yok: Verify that the Ethernet cable is properly connected at both ends. Check the connected device for power and proper operation. Try a different cable or port.
• PoE Cihazı Çalışmıyor: Ensure the device is PoE-compatible and connected to a PoE+ port. Check the PoE LED status. Verify the switch's PoE budget is not exceeded.
• Erişilemiyor Web Grafiksel Kullanıcı Arayüzü: Confirm your computer's IP address is in the same subnet as the switch. Clear your browser's cache or try a different browser. Verify physical connectivity to the switch.
• Yavaş Ağ Performansı: Check for network loops, excessive broadcast traffic, or faulty cables. Ensure duplex settings match between the switch and connected devices.

9. Özellikler

10. Garanti ve Destek

For warranty information and technical support, please refer to the documentation included with your product or visit the official ZYXEL webbir site. website provides access to drivers, firmware, FAQs, and contact information for customer service.

ZYXEL Webalan: www.zyxel.com