Texas CB8700 Professional Gasoline Scythe Mower

1. Güvenlik Talimatları

Always read and understand all safety instructions before operating the Texas CB8700 scythe mower. Failure to follow these instructions can result in serious injury or death.

• Kişisel Koruyucu Donanım (KKD): Always wear appropriate PPE, including safety glasses, hearing protection, sturdy footwear, and long pants.
• Yakıt Kullanımı: Handle gasoline with extreme care. Store fuel in approved containers in a well-ventilated area away from ignition sources. Refuel outdoors with the engine off and cool.
• Çalışma Alanı: Clear the work area of debris, rocks, and other objects that could be thrown by the mower. Keep bystanders, especially children and pets, at a safe distance (at least 15 meters).
• Operation on Slopes: Exercise extreme caution when operating on slopes. Mow across the face of slopes, never up and down. Avoid excessively steep slopes.
• Bakım: Disconnect the spark plug wire before performing any maintenance or adjustments. Ensure all guards and safety devices are in place and functioning correctly.

2. Ürün Bittiview

The Texas CB8700 is a professional-grade gasoline scythe mower designed for efficient cutting of high grass and dense vegetation. It features a powerful 4-stroke engine and wheel drive for easy maneuverability.

Şekil 2.1: Ön-sol view of the Texas CB8700 Scythe Mower, showing the engine, handle, wheels, and front cutter bar.

Şekil 2.2: Ön-sağ view of the Texas CB8700 Scythe Mower, highlighting the robust construction and wheel drive system.

Şekil 2.3: Yan view of the Texas CB8700 Scythe Mower, illustrating the ergonomic handle and the position of the engine and cutter bar.

Temel Özellikler:

• Powerful 159 ccm gasoline engine.
• Front cutter bar ideal for high grass.
• Integrated wheel drive for easy maneuverability.
• Large cutting width of 87 cm.
• Konforlu kullanım için ergonomik tutacak.

3. Kurulum

3.1 Paketin Açılması ve Montaj

1. Carefully remove the mower and all components from the packaging.
2. Nakliye sırasında oluşabilecek hasarları kontrol edin. Herhangi bir hasarı derhal bayinize bildirin.
3. Attach the handle assembly to the main unit using the provided hardware. Ensure all bolts are securely tightened.
4. Verify that the cutter bar is securely attached and moves freely.

3.2 Yakıt ve Yağ Ekleme

The engine is shipped without oil or fuel. It is crucial to add both before first use.

• Motor yağı: Fill the engine with SAE 30 engine oil. The oil tank volume is 0.6 liters. Use the dipstick to ensure the oil level is between the 'min' and 'max' marks. Do not overfill.
• Yakıt: Fill the fuel tank with fresh, unleaded gasoline. Do not use E85 or other ethanol blends not approved for small engines. Do not overfill the tank; leave space for fuel expansion.

WARNING: Never refuel while the engine is running or hot. Avoid spilling fuel. If fuel is spilled, wipe it up immediately and wait for fumes to dissipate before starting the engine.

4. Çalıştırma

4.1 Ameliyat Öncesi Kontrol

• Motor yağı seviyesini kontrol edin.
• Yakıt seviyesini kontrol edin.
• Inspect the cutter bar for damage or wear.
• Tüm somunların, cıvataların ve bağlantı elemanlarının sıkı olduğundan emin olun.

4.2 Motorun Çalıştırılması

1. Ensure the fuel valve is open (if applicable).
2. Set the choke lever to the 'CHOKE' position for a cold engine. For a warm engine, set to 'RUN' or 'HALF CHOKE'.
3. Gaz kolunu 'HIZLI' konumuna getirin.
4. Geri tepmeli marş kolunu sıkıca kavrayın ve direnç hissedene kadar yavaşça çekin, ardından motoru çalıştırmak için hızlı ve düzgün bir şekilde çekin. Gerekirse tekrarlayın.
5. Motor çalıştıktan sonra, motor ısındıkça jikle kolunu kademeli olarak 'ÇALIŞTIRMA' konumuna getirin.

4.3 Çim Biçme İşlemi

• Engage the cutter bar clutch (if equipped) and the wheel drive lever.
• Walk at a steady pace, allowing the mower to cut efficiently. Do not force the mower through dense vegetation.
• Adjust the cutting height as needed (maximum adjustable cutting height: 80 cm).
• When turning, disengage the cutter bar and wheel drive, maneuver the mower, then re-engage.

4.4 Motorun Durdurulması

1. Disengage the cutter bar and wheel drive.
2. Move the throttle lever to the 'SLOW' or 'IDLE' position and allow the engine to cool for a few minutes.
3. Motor anahtarını 'KAPALI' konumuna getirin.
4. Close the fuel valve (if applicable) for storage.

5. Bakım

Regular maintenance ensures optimal performance and extends the life of your Texas CB8700 scythe mower. Always disconnect the spark plug wire before performing any maintenance.

5.1 Motor Yağı

• Her kullanımdan önce yağ seviyesini kontrol edin.
• Motor yağını ilk 5 saatlik çalışmadan sonra, daha sonra her 25 saatte bir veya yılda bir, hangisi önce gerçekleşirse, değiştirin.

5.2 Hava Filtresi

• Inspect the paper and foam air filter elements every 10 hours or more frequently in dusty conditions.
• Clean the foam element with warm, soapy water, rinse, and allow to dry completely. Lightly oil the foam element before reinstallation.
• Replace the paper element if it is excessively dirty or damaged.

5.3 Cutter Bar

• Clean the cutter bar after each use to remove grass and debris.
• Inspect the blades for sharpness and damage. Sharpen or replace blades as needed.
• Lubricate moving parts of the cutter bar according to the lubrication schedule in the full manual.

5.4 Depolama

• For long-term storage, drain the fuel tank or add a fuel stabilizer. Run the engine until it stops to consume all fuel in the carburetor.
• Makinenin tamamını iyice temizleyin.
• Store in a clean, dry area, protected from extreme temperatures.

6. Sorun Giderme

For issues not listed here, or if solutions do not resolve the problem, please contact authorized service personnel.

7. Özellikler

8. Garanti ve Destek

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Texas webSite. Garanti şartları ve koşulları bölgeye göre değişiklik gösterebilir.

If you require technical assistance, spare parts, or have any questions not covered in this manual, please contact Texas customer support or your authorized dealer. Have your product model number (CB8700) and serial number ready when contacting support.

Üreticinin resmi internet sitesinde genellikle iletişim bilgilerini bulabilirsiniz. websitede veya satın alma fişinizde yer almaktadır.