JOYO Maximum R-05 Overdrive Pedal Instruction Manual

1. Giriş

The JOYO Maximum R-05 is a versatile dual-channel overdrive pedal designed for electric guitar. It offers two distinct overdrive tones: a pure and clean drive channel without compression, and a wild boost channel with independent control for extended sustain. This pedal also features two toggle switches for adjusting mid-frequency brightness and selecting between MOSFET and diode clipper circuit clippings. Its robust aluminum alloy casing and unique LED lighting enhance both durability and aesthetic appeal.

2. Güvenlik Bilgileri

• Use only a DC 9V (center minus) power adapter. Ensure the adapter meets the pedal's current requirements (30mA).
• Avoid using non-original power adapters to prevent unexpected noise or damage.
• Do not disassemble or modify the pedal.
• Keep the pedal away from water, moisture, and extreme temperatures.
• Kuru, yumuşak bir bezle temizleyin.

3. Paket İçeriği

• JOYO Maximum R-05 Overdrive Pedal (Power supply not included)
• Kullanıcı Kılavuzu

4. Kontroller ve İşlevler

Resim: Ön view of the JOYO Maximum R-05 Overdrive Pedal, highlighting its dual-channel design and control knobs.

• VOL (Hacim): Controls the overall output volume of the pedal.
• TON: Adjusts the brightness or darkness of the overdrive tone.
• KAZANÇ: Controls the amount of overdrive/distortion for the Drive channel.
• ARTIRMAK: Controls the amount of boost for the Boost channel.
• DRIVE Footswitch: Activates/deactivates the Drive channel.
• BOOST Ayak Pedalı: Activates/deactivates the Boost channel.
• Mid-Frequency Toggle Switch (Left): Adjusts the brightness of the mid-frequency (3 positions: HD.CLIP, FLAT, SMOOTH).
• Circuit Clipping Toggle Switch (Right): Switches between different circuit clippings (MOSFET clipper mode and diode clipper mode).

Image: Close-up of the pedal's toggle switches, illustrating the optimal circuit and true bypass design.

The left toggle switch adjusts the brightness of the mid-frequency, offering three distinct positions for tonal shaping. The right toggle switch allows you to select between MOSFET clipper mode and diode clipper mode, providing different characteristics of circuit clipping. The true bypass design minimizes tone loss when the pedal is disengaged, ensuring a clean signal path.

5. Kurulum

1. Connect your guitar to the 'INPUT' jack on the right side of the pedal.
2. Connect the 'OUTPUT' jack on the left side of the pedal to your amplifier or next pedal in the signal chain.
3. Connect a DC 9V (center minus) power adapter to the DC 9V input.
4. Cihazı çalıştırmadan önce tüm bağlantıların güvenli olduğundan emin olun. ampcankurtaran.

Image: Diagram showing proper connection of the pedal to a guitar and amplifier, along with power supply details.

For optimal performance and to avoid unexpected noise, ensure the pedal is fully connected with your guitar and amplifier before playing. It is highly recommended to use a JOYO original power adapter or another reliable brand that meets the DC 9V (center minus) and 30mA current requirements.

6. Pedalların Kullanımı

Dual Channel Overdrive

The R-05 pedal features two distinct overdrive channels:

• Sürücü Kanalı: Provides a pure and clean overdrive tone without compression. Use the GAIN knob to adjust the intensity.
• Boost Channel: Delivers a wild overdrive effect with long sustain. Use the independent BOOST knob to control the level of boost.

Ton Şekillendirme

Utilize the TONE knob to fine-tune the overall brightness of your sound. Experiment with the two toggle switches to further sculpt your tone:

• The left toggle switch allows you to adjust the mid-frequency brightness, offering three distinct settings.
• The right toggle switch lets you choose between MOSFET and diode clipping modes, each providing a unique overdrive character.

7. Özellikler

Özellik	Şartname
Giriş Empedansı	1MΩ
Çıkış Empedansı	100Ω
Çalışma Hacmitage	DC 9V (merkez eksi)
Nominal Akım Tüketimi	30mA
Ürün Ağırlığı	386 Gram (13.6 ons)
Ürün Boyutları	12.5cm L x 7.85cm W x 4.8cm H (4.92"L x 3.09"W x 1.89"H)
Malzeme Türü	Alloy, Aluminum, Carbon Fiber, Stainless-Steel
Sinyal Biçimi	Analog

The pedal's compact and sturdy design, featuring an aluminum alloy casing, ensures durability and good resistance to rust.

Image: Detailed diagram showing the dimensions and key specifications of the JOYO Maximum R-05 Overdrive Pedal.

8. Bakım

• Kabloları ve bağlantıları aşınma ve yıpranma açısından düzenli olarak inceleyin.
• Keep the pedal clean and free from dust and debris.
• Store the pedal in a dry, cool place when not in use.
• Pedala aniden basmaktan veya sert darbelere maruz bırakmaktan kaçının.

9. Sorun Giderme

• Ses Yok: Check all cable connections (guitar, pedal, amplifier). Ensure the power adapter is correctly connected and functioning. Verify that the pedal is engaged (LED indicator on).
• Zayıf veya Bozuk Ses: Check the battery (if applicable) or power supply. Ensure all knobs are set appropriately and not at extreme positions that might cause unwanted distortion.
• Aşırı Gürültü: Use a high-quality, isolated power supply. Ensure all cables are shielded. Avoid placing the pedal too close to power sources or other electronic devices that might cause interference.
• Pedal Devreye Girmiyor: Ensure the footswitch is pressed firmly. Check power supply.

10. Garanti ve Destek

For warranty information, technical support, or service inquiries, please refer to the official JOYO webYetkili satıcınızla iletişime geçin veya siteyi ziyaret edin. Garanti talepleriniz için satın alma belgenizi saklayın.