giriiş
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
Güvenlik Talimatları
Genel Elektrikli Alet Güvenlik Uyarıları:
- Çalışma Alanı Güvenliği: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Elektriksel Güvenlik: Borular, radyatörler, ocaklar ve buzdolapları gibi topraklanmış veya topraklanmış yüzeylerle vücut temasından kaçının. Vücudunuz topraklanmış veya topraklanmışsa elektrik çarpması riski artar.
- Kişisel Güvenlik: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Elektrikli Alet Kullanımı ve Bakımı: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- Bakım: Elektrikli aletleri ve aksesuarlarını koruyun. Hareketli parçaların hizalanmaması veya sıkışması, parçaların kırılması ve elektrikli aletin çalışmasını etkileyebilecek diğer koşulları kontrol edin.
Specific Circular Saw Safety Warnings:
- Ellerinizi kesme alanından ve bıçaktan uzak tutun. İş parçasının altına uzanmayın.
- Kesme derinliğini ayarlayın to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- Asla hasarlı veya yanlış bıçaklı rondelalar veya cıvatalar kullanmayın.
Ürün Bittiview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
Temel Bileşenler:
- Ana Sap: Ergonomic grip for primary control and operation.
- Yardımcı Kulp: Provides additional stability and control during cutting.
- Açma/Kapama Anahtarı: Motoru etkinleştirir ve devre dışı bırakır.
- Mil Kilidi: Button used to lock the spindle for safe and easy saw blade changes.
- Bıçak Koruması: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- Derinlik Ayar Kolu: Mechanism for setting the desired cutting depth.
- Eğim Ayar Kolu: Mechanism for setting the desired cutting angle for bevel cuts.
- Testere Bıçağı: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Toz Emme Adaptörü: Port for connecting a dust collection system to minimize sawdust.
- Pil Paketi Soketi: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
Kurmak
1. Pil Kurulumu
Ensure the tool is switched off before installing or removing the battery pack.
- Pil takımını alet üzerindeki yuvaya hizalayın.
- Pil takımını yerine oturana ve güvenli bir şekilde tık sesi duyana kadar yuvaya kaydırın.
- Çıkarmak için pil takımının üzerindeki serbest bırakma düğmesine basın ve dışarı doğru kaydırın.
2. Saw Blade Installation
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- Bıçağın dönmesini engellemek için mil kilitleme düğmesine basılı tutun.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- Dış flanşı ve eski testere bıçağını çıkarın.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. Kesme Derinliğinin Ayarlanması
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- Derinlik ayar kolunu gevşetin.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- Ayarı kilitlemek için derinlik ayar kolunu iyice sıkın.
4. Eğim Açısının Ayarlanması
The saw can make bevel cuts up to 45 degrees for angled cuts.
- Eğim ayarlama kolunu gevşetin.
- Tilt the saw to the desired angle, indicated on the bevel scale.
- Tighten the bevel adjustment lever securely to lock the angle.
Kullanım Talimatları
1. Başlatma ve Durdurma
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. Kesim Yapmak
- Secure the workpiece firmly with clampKesim sırasında hareket etmesini önlemek için.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- Start the saw and allow the blade to reach full speed before engaging the material.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. Toz Emme
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
Bakım
Temizlik
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
Bıçak Bakımı
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
Depolamak
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Testere başlamıyor | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| Aşırı titreşim | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| Kötü kesim kalitesi (pürüzlü kenarlar, kıymıklar) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
Özellikler
- Modeli: Einhell TE-CS 18/165-1 Li-Solo
- Cilttage: 18 V (Battery Operated)
- Boştaki hız: 4,200 dak⁻¹
- Testere Bıçağı Çapı: 165 mm
- Mil Deliği Çapı: 20 mm
- Max. Cutting Depth (90°): Yaklaşık 54 mm
- Max. Cutting Depth (45°): Yaklaşık 35 mm
- Ürün Ağırlığı: 2.72 kg (pilsiz)
- Bıçak Malzemesi: Yüksek Hızlı Çelik
- Diş Sayısı: 24
- Özellik: Kablosuz çalışma
- Dahil Bileşenler: Testere Bıçağı
- Not: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
Garanti ve Destek
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
