Smartwares IDE-60047 Siyah Tekstil Tavan Lambası Kullanım Kılavuzu

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your Smartwares IDE-60047 Black Textile Ceiling Light. Please read this manual carefully before installation and retain it for future reference. This ceiling light features a 60 cm diameter textile shade and is designed for indoor use, providing ambient lighting with four E27 bulb sockets.

Image 1.1: The Smartwares IDE-60047 Black Textile Ceiling Light.

2. Güvenlik Bilgileri

• Kurulum, bakım veya ampul değiştirme işlemlerinden önce daima güç kaynağını ayırın.
• Elektrik tesisatı konusunda emin değilseniz, montajı mutlaka kalifiye bir elektrikçiye yaptırmalısınız.
• Montaj yüzeyinin armatürün ağırlığını taşıyabileceğinden emin olun.
• Maksimum su miktarını aşmayıntage of 18W per bulb socket.
• Bu ürün yalnızca iç mekan kullanımı için tasarlanmıştır (IP20 derecesi). Neme veya aşırı sıcaklıklara maruz bırakmayın.
• Ambalaj malzemelerini çocuklardan uzak tutunuz.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Smartwares IDE-60047 Ceiling Light (Textile Shade and Mounting Base)
• Kullanıcı Kılavuzu

Not: Ampuller ürüne dahil değildir ve ayrıca satın alınmalıdır.

4. Kurulum Talimatları

Tavan lambanızın doğru şekilde montajı için şu adımları izleyin:

1. Hazırlık: Herhangi bir elektrik işine başlamadan önce ana güç kaynağını devre kesiciden kapatın.
2. Mounting the Base Plate:
   Position the mounting base against the ceiling at your desired location. Mark the drilling points. Drill holes and insert appropriate wall plugs (if necessary). Secure the mounting base to the ceiling using screws. Ensure it is firmly attached.
   

   Resim 4.1: Dahili view of the ceiling light's mounting base with E27 sockets.

3. Kablolama:
   Connect the household electrical wires to the terminals on the ceiling light's mounting base. Ensure correct polarity (Live, Neutral, Earth). The connection box may require careful opening to access the terminals. Secure all connections.
4. Attaching the Textile Shade:
   Carefully align the textile shade with the mounting base. The shade is designed to fit over the base and secure into place. Ensure it is evenly seated and stable.
5. Ampullerin Takılması:
   Screw four E27 base bulbs (max 18W each, LED compatible) into the sockets. Do not overtighten.
6. Son Kontrol: Once all steps are complete, restore power at the circuit breaker. Test the light fixture.

For alternative installation as a pendant light, the Smartwares 10.005.71 or 6000.518 suspension kit (sold separately) is required.

Image 4.2: The ceiling light can be adapted for pendant installation with an optional kit.

5. Kullanım Talimatları

The Smartwares IDE-60047 ceiling light operates via a standard wall switch connected to your household electrical circuit. It is compatible with E27 LED bulbs up to 18W per socket.

• Güç Açma/Kapatma: Lambayı açmak veya kapatmak için duvardaki anahtarı kullanın.
• Kısılabilir İşlevsellik: While the fixture itself is not inherently dimmable, it is compatible with dimmable E27 LED bulbs. To utilize dimming, you must install dimmable bulbs and connect the fixture to a compatible dimmer switch (not included) in your electrical system.

6. Bakım

• Temizlik: Disconnect power before cleaning. Wipe the textile shade and plastic diffuser with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ampul Değişimi: Disconnect power. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E27 bulbs, ensuring they do not exceed 18W.

7. Sorun Giderme

• Işık açılmıyor:
  Check the power supply at the circuit breaker. Ensure bulbs are correctly installed and not faulty. Verify all electrical connections are secure.
• Işık titriyor:
  Ensure bulbs are fully screwed in. If using LED bulbs, confirm they are compatible with the fixture and your electrical system. If using a dimmer, ensure both the bulbs and dimmer switch are compatible with each other. A loose connection can also cause flickering.
• Difficulty attaching the shade:
  Ensure the shade is correctly aligned with the mounting guides on the base. Apply gentle, even pressure. Do not force the shade, as this may damage the textile or frame.

8. Özellikler

Image 8.1: Product dimensions: 60 cm diameter, 10 cm height.

9. Garanti ve Destek

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact Smartwares customer service. Keep your proof of purchase for warranty claims.