Klipsch SUB-120

Klipsch Synergy Black Label Sub-120 Subwoofer Instruction Manual

1. Giriş

This manual provides essential information for the proper installation, operation, and maintenance of your Klipsch Synergy Black Label Sub-120 front-firing 12” subwoofer. Designed to deliver powerful bass, this subwoofer features 200 watts of continuous power and 400 watts of dynamic power, driven by an all-digital amplifier for accurate sound reproduction. It is compatible with most AV receivers, enhancing any home theater setup with deep, thundering bass.

Klipsch Synergy Black Label Sub-120 Subwoofer, front view with copper cone visible

Figure 1: Klipsch Synergy Black Label Sub-120 Subwoofer, showcasing its front-firing design and distinctive copper cone.

Klipsch Synergy Black Label Sub-120 Subwoofer with grille attached

Figure 2: Klipsch Synergy Black Label Sub-120 Subwoofer with its strong, flexible, and removable grille in place.

2. Önemli Güvenlik Bilgileri

Please read all safety instructions before operating this product. Keep this manual for future reference. Adhere to all warnings on the product and in the operating instructions.

  • Güç Kaynağı: Only connect the subwoofer to a power supply of the type described in the operating instructions or as marked on the appliance.
  • Havalandırma: Yeterli havalandırmayı sağlayın. Havalandırma açıklıklarını kapatmayın. Üreticinin talimatlarına uygun olarak kurulum yapın.
  • Sıcaklık: Radyatörler, kalorifer ızgaraları, sobalar veya diğer cihazlar (dahil) gibi herhangi bir ısı kaynağının yakınına kurmayın. amp(ısı üreten)
  • Su ve Nem: Bu cihazı su yakınında veya aşırı nemli ortamlarda kullanmayın.
  • Temizlik: Sadece kuru bezle temizleyin.
  • Servis: Bu ürüne kendiniz servis vermeye çalışmayın. Tüm servis işlemleri için kalifiye servis personeline başvurun.

3. Kutuda Neler Var?

Paketi açtığınızda lütfen aşağıdaki tüm öğelerin dahil olduğunu doğrulayın:

  • Klipsch Synergy Black Label Sub-120 Subwoofer
  • Güç Kablosu
  • Kullanım Kılavuzu (bu belge)

Note: Connection wires (e.g., RCA cables) are not included and must be purchased separately.

4. Kurulum

4.1 Subwoofer Yerleşimi

For optimal performance and bass response, it is recommended to place your Klipsch Sub-120 subwoofer in a corner of the room. Corner placement utilizes the room's acoustics to enhance bass output and provide a more immersive audio experience.

4.2 Bağlantılar

The Klipsch Sub-120 offers flexible connection options to integrate with almost any AV receiver or stereo system.

  • LFE (Low-Frequency Effects) Input: For receivers with a dedicated subwoofer output (LFE or SUB OUT), connect a single RCA cable from the receiver's subwoofer output to the LFE input on the subwoofer. This is the recommended connection for home theater systems.
  • Line In (Stereo RCA Inputs): If your receiver does not have an LFE output, connect stereo RCA cables from your receiver's pre-out (left and right) to the corresponding Line In (L/R) inputs on the subwoofer.
Close-up of the Klipsch Sub-120 back panel showing Line In and LFE inputs

Şekil 3: Ayrıntılı view of the Line In and LFE input connections on the subwoofer's rear panel.

4.3 Güç Bağlantısı

Once audio connections are made, connect the provided power cord to the subwoofer's power input and then to a suitable wall outlet (100-240V, 50/60Hz 2A).

5. Subwoofer'ın Çalıştırılması

The Klipsch Sub-120 features several controls on its rear panel to fine-tune its performance to your listening environment and preferences.

Klipsch Sub-120 back panel showing all controls and connections

Figure 4: Rear panel of the Klipsch Sub-120, illustrating the location of all controls and inputs.

5.1 Kontrollerview

  • GAIN (Ses Seviyesi) Kontrolü: Subwoofer'ın genel çıkış seviyesini ayarlar. Düşük bir ayarla başlayın ve bas sesleri ana hoparlörlerinizle kusursuz bir şekilde bütünleşene kadar kademeli olarak artırın.
  • LOW-PASS (Crossover) Control: This knob sets the upper frequency limit for the subwoofer. Frequencies above this setting will not be reproduced by the subwoofer. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is 80Hz, but it can be adjusted between 40Hz and 120Hz.
  • FAZ Anahtarı (0°/180°): This switch adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass response in your listening position.
  • AÇMA/OTOMATİK/KAPATMA Anahtarı:
    • AÇIK: The subwoofer remains continuously powered on.
    • OTO: The subwoofer automatically turns on when an audio signal is detected and enters standby mode after a period of inactivity.
    • KAPALI: Subwoofer kapalı.

6. Bakım

To ensure the longevity and optimal performance of your Klipsch Sub-120 subwoofer, follow these simple maintenance guidelines:

  • Temizlik: Use a dry, soft cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
  • Izgara Bakımı: The subwoofer features a removable grille. If cleaning is necessary, gently remove the grille and use a soft brush or vacuum cleaner with a brush attachment to remove dust.
  • Havalandırma: Aşırı ısınmayı önlemek için havalandırma açıklıklarının toz ve kirden arındırılmış olduğundan düzenli olarak emin olun.
  • Depolamak: Subwoofer'ı uzun süre saklayacaksanız, güç kaynağından ayırın ve serin, kuru bir yerde, tercihen orijinal ambalajında ​​saklayın.

7. Sorun Giderme

If you encounter issues with your Klipsch Sub-120 subwoofer, refer to the following common problems and solutions:

SorunOlası NedenÇözüm
Subwoofer'dan Ses Gelmiyor
  • Güç kablosu bağlı değil veya priz aktif değil.
  • Subwoofer is in OFF mode or AUTO mode without signal.
  • Audio cable not connected or faulty.
  • Receiver's subwoofer output is disabled or volume is too low.
  • Check power connections and wall outlet.
  • Set ON/AUTO/OFF switch to ON or ensure audio signal is present for AUTO mode.
  • Ses kablosu bağlantılarını kontrol edin; farklı bir kablo deneyin.
  • Check receiver settings for subwoofer output and volume.
Bozuk veya Bulanık Bas
  • GAIN (volume) set too high.
  • LOW-PASS (crossover) set incorrectly.
  • Faz ayarı yanlış.
  • Subwoofer yerleştirme sorunları.
  • Reduce the GAIN control on the subwoofer.
  • Adjust the LOW-PASS control to blend with main speakers.
  • Toggle the PHASE switch (0°/180°) to find the best sound.
  • Farklı subwoofer yerleşimleriyle denemeler yapın.
Subwoofer Not Turning On Automatically
  • ON/AUTO/OFF switch not set to AUTO.
  • Input signal too low to trigger auto-on.
  • Ensure the switch is set to AUTO.
  • Increase the output level from your receiver's subwoofer output.

8. Özellikler

Detailed technical specifications for the Klipsch Synergy Black Label Sub-120 Subwoofer:

ÖzellikDetay
Model AdıALT-120
Hoparlör TipiSubwoofer
Subwoofer Çapı12 inç
Woofer TipiSpun copper front-firing Cerametallic woofers
Sürekli Güç200 Watt
Dinamik Güç400 Watt
Ampkaldırıcı TipiDijital Ampcankurtaran
Frekans TepkisiUp to 20 KHz (adjustable via Low-Pass filter)
Bağlantı TeknolojisiWired (RCA Line In/LFE)
Kontrol YöntemiManual (Gain, Low-Pass, Phase, Power)
Ürün Boyutları (D x G x Y)19.25" x 14" x 16"
Ürün Ağırlığı36.4 Pound
RenkSiyah
MalzemeWood cabinet, Copper woofer
Güç KaynağıKablolu Elektrik
Önerilen KullanımlarHome Theater, Televisions, Gaming Consoles, Streaming Devices
Diagram showing the dimensions of the Klipsch Sub-120 Subwoofer: 16 inches H, 14 inches W, 19.25 inches D

Figure 5: Dimensions of the Klipsch Synergy Black Label Sub-120 Subwoofer.

9. Garanti ve Destek

9.1 Garanti Bilgileri

The Klipsch Synergy Black Label Sub-120 Subwoofer comes with a Sınırlı Garanti. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official Klipsch webalan.

9.2 Müşteri Desteği

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Klipsch Customer Support. Contact information can typically be found on the Klipsch official websitede veya ürün ambalajında ​​yer almamaktadır.

Çevrimiçi Kaynaklar: Visit the official Klipsch webSSS, ürün kaydı ve ek destek kaynakları için site.

İlgili Belgeler - ALT-120

Önview Klipsch Synergy Black Label Kullanım Kılavuzu: Kurulum ve Çalıştırma
Klipsch Synergy Black Label hoparlörler için kapsamlı kullanım kılavuzu; F-300, F-200, B-200, B-100, C-200, SUB 120 ve SUB 100 gibi modeller için kurulum, oda yerleşimi, bağlantılar ve güvenlik talimatlarını içerir.
Önview Klipsch Referans Subwoofer Kullanım Kılavuzu
Klipsch Reference Serisi subwoofer'lar (R-10SW ve R-12SW modelleri dahil) için kullanım kılavuzu. Optimum ses performansı için kurulum, bağlantı, kontrol ve bakım talimatları sağlar.
Önview Klipsch R-120SWi Referans Subwoofer Kullanım Kılavuzu
Klipsch R-120SWi Referans Subwoofer'ınızın inceleme, konumlandırma, kontroller, kablolu ve kablosuz bağlantılar, bakım ve ürün kaydını kapsayan kullanım kılavuzu. Klipsch subwoofer'ınızı optimum ses performansı için nasıl kuracağınızı ve kullanacağınızı öğrenin.
Önview Klipsch Referans Subwoofer Kullanım Kılavuzu
Klipsch Reference subwoofer'ları (R-8SW, R-10SW, R-12SW) için resmi kullanım kılavuzu. Klipsch ses sisteminizin kurulumu, bağlantıları, kontrolleri, konumlandırılması ve bakımı hakkında bilgi edinin.
Önview Klipsch REFERENCE Theater 5.1 Kullanım Kılavuzu
Bu kullanım kılavuzu, Klipsch REFERENCE Theater 5.1 hoparlör sistemi için temel güvenlik talimatlarını, kurulum kılavuzunu ve çalıştırma detaylarını içermektedir. Hoparlör yerleşimi, kablo bağlantıları, subwoofer kurulumu ve bakım talimatları hakkında bilgi edinin.
Önview Klipsch Synergy Serisi Hoparlörler: Kullanım Kılavuzu ve Garanti
Klipsch Synergy Serisi hoparlörler (SB-1, SC.5 ve SS.5 modelleri dahil) için kapsamlı kullanım kılavuzu ve garanti bilgileri. Kurulum, güvenlik, teknik özellikler ve sınırlı garanti konularını kapsar.