PowerWalker VI 3000 SCL FR UPS Kullanım Kılavuzu

1. Giriş

Thank you for choosing the PowerWalker VI 3000 SCL FR Uninterruptible Power Supply (UPS). This device is designed to provide reliable power protection for your electronic equipment against power outages, surges, and spikes. It ensures continuous operation and safeguards your valuable data and hardware.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your UPS. Please read it thoroughly before using the product and keep it for future reference.

Figure 1.1: PowerWalker VI 3000 SCL FR UPS

This image shows the PowerWalker VI 3000 SCL FR UPS from an angled front perspective, highlighting its compact black casing and the front display panel.

2. Güvenlik Talimatları

Please observe the following safety precautions to ensure safe operation and to prevent damage to the UPS or connected equipment.

• Elektriksel Güvenlik: UPS kutusunu açmayın.asing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Ensure the UPS is connected to a grounded power outlet.
• Atama: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Do not block ventilation openings.
• Pil Güvenliği: The UPS contains internal batteries. Do not dispose of batteries in a fire, as they may explode. Do not open or mutilate batteries. Electrolyte is harmful to the skin and eyes.
• Aşırı yük: Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's rated capacity (1800W).

3. Paket İçeriği

Carefully unpack the UPS and check the contents of the package. You should find the following items:

• PowerWalker VI 3000 SCL FR UPS Unit
• Kullanım Kılavuzu (bu belge)
• USB Cable (for HID driver communication)
• Güç Kabloları

Herhangi bir öğenin eksik veya hasarlı olması durumunda lütfen derhal satıcınızla iletişime geçin.

4. Ürün Bittiview

4.1 Ön Panel

Figure 4.1: Front Panel of the UPS

This image displays the front panel of the PowerWalker VI 3000 SCL FR UPS, showing the LCD display and the power button.

1. LCD Ekran: Giriş/çıkış hacmi gibi gerçek zamanlı durum bilgilerini gösterir.tage, pil seviyesi, yük kapasitesi ve çeşitli çalışma modları.
2. Güç Düğmesi: UPS'i açmak veya kapatmak için kullanılır.

4.2 Arka Panel

Figure 4.2: Rear Panel of the UPS

This image illustrates the rear panel of the PowerWalker VI 3000 SCL FR UPS, detailing the various input/output ports and sockets.

1. COM.PORT (RS-232): Serial communication port for monitoring software.
2. USB Bağlantı Noktası: USB communication port for monitoring software and HID driver functionality.
3. Output Sockets (French Type): Connect your critical equipment here. These outlets provide battery backup and surge protection.
4. Giriş Güç Kablosu: Kesintisiz güç kaynağını (UPS) elektrik prizine bağlar.
5. RJ11/RJ45 Protection (IN/OUT): Provides surge protection for telephone/network lines.
6. Sıfırlama Düğmesi: Used to reset the UPS in certain error conditions.

5. Kurulum

5.1 Yerleştirme

Choose a suitable location for your UPS:

• UPS cihazını düz ve sağlam bir yüzeye yerleştirin.
• Ensure adequate airflow around the unit. Maintain at least 10 cm (4 inches) clearance from walls or other obstructions.
• Avoid areas with excessive dust, humidity, or extreme temperatures.

5.2 Güce Bağlama

1. Connect the UPS input power cord to a grounded wall outlet.
2. Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery runtime. The UPS will charge whether it is turned ON or OFF.

5.3 Bağlantı Ekipmanı

1. Plug your computer, monitor, and other critical devices into the output sockets on the rear panel of the UPS.
2. Do not connect laser printers or shredders to the UPS, as their high surge current during startup may overload the unit.
3. For network/telephone line protection, connect your modem/router to the RJ11/RJ45 IN port and then connect the OUT port to your device.

6. Çalıştırma

6.1 Turning the UPS ON/OFF

• AÇMAK için: Ön paneldeki güç düğmesine yaklaşık 3 saniye basılı tutun; bir bip sesi duyana ve LCD ekran aydınlanana kadar bekleyin.
• Kapatmak: Press and hold the power button for approximately 3 seconds until you hear a beep and the LCD display turns off.

6.2 LCD Ekranı Anlama

The LCD display provides real-time status of the UPS. Key indicators include:

• Giriş Voltage: Displays the current utility power voltage.
• Çıkış Hacmitage: hacmi görüntülertagUPS tarafından bağlı cihazlara sağlanan e enerjisi.
• Pil Seviyesi: Kalan pil şarjını gösterir.
• Yük Kapasitesi: Yüzdeyi gösterirtagUPS'in kapasitesinin bağlı cihazlar tarafından kullanılması.
• Çalışma Modu: Indicates if the UPS is operating on utility power (AC mode) or battery power (Battery mode).

6.3 Yazılım Kurulumu (İsteğe bağlı)

For advanced monitoring and management features, you can install the PowerWalker monitoring software. This software allows you to:

• UPS'in durumunu ve güç koşullarını izleyin.
• Perform scheduled shutdowns.
• Receive alerts for power events.

Connect the UPS to your computer using the provided USB cable. The UPS supports HID (Human Interface Device) driver, allowing basic functionality without additional software on compatible operating systems.

7. Bakım

7.1 Pil Bakımı

• To maintain optimal battery life, ensure the UPS is connected to a power outlet at all times to keep the batteries charged.
• Perform a battery calibration (if supported by software) or a full discharge/recharge cycle every 3-6 months to ensure accurate battery runtime readings.
• Batteries are consumable items and will degrade over time. Replace batteries when their runtime significantly decreases.

7.2 Temizlik

UPS'in dış yüzeyini yumuşak, kuru bir bezle temizleyin. Sıvı veya aerosol temizleyiciler kullanmayın. Havalandırma açıklıklarının toz ve kirden arındırılmış olduğundan emin olun.

7.3 Depolama

If storing the UPS for an extended period, ensure the batteries are fully charged. Recharge the batteries every three months to prevent permanent damage due to self-discharge.

8. Sorun Giderme

UPS cihazınızla ilgili sorunlarla karşılaşırsanız, sık karşılaşılan sorunlar ve çözümler için aşağıdaki tabloya bakın:

Yukarıdaki çözümleri denedikten sonra sorun devam ederse lütfen müşteri desteğiyle iletişime geçin.

9. Özellikler

Technical specifications for the PowerWalker VI 3000 SCL FR UPS:

10. Garanti ve Destek

10.1 Garanti Bilgileri

PowerWalker products are manufactured to the highest quality standards. This UPS comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official PowerWalker webAyrıntılı garanti şartları ve koşulları için siteyi ziyaret edin.

10.2 Müşteri Desteği

For technical assistance, troubleshooting, or warranty claims, please contact PowerWalker customer support. You can typically find contact information on the PowerWalker official websitenizden veya yerel distribütörünüz aracılığıyla temin edebilirsiniz.

Destek ekibiyle iletişime geçerken lütfen ürün model numaranızı (10121151) ve seri numaranızı hazır bulundurun.