1. Giriş
The ANYCUBIC Wash and Cure 3.0 is an upgraded 2-in-1 wash and cure station designed for resin 3D printer models. It features a larger cleaning capacity, innovative gooseneck lights for uniform curing, a dual-layer design for IPA saving, and quiet, simple operation. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Güvenlik Talimatları
- Always wear protective gloves and eye protection when handling resin or cleaning solutions.
- Ensure adequate ventilation in your workspace to avoid inhaling resin fumes.
- Cihazı çocuklardan ve evcil hayvanlardan uzak tutunuz.
- Cihazı doğrudan güneş ışığına veya yüksek sıcaklıklara maruz bırakmayın.
- Use only recommended cleaning solutions (e.g., Isopropyl Alcohol - IPA) and follow their safety guidelines.
- Never operate the curing function without the UV-blocking top cover in place.
- Temizlik veya bakım yapmadan önce elektrik bağlantısını kesin.
3. Kutuda Neler Var?
Upon unboxing your ANYCUBIC Wash and Cure 3.0, please verify that all components are present:
- Wash and Cure Machine Unit
- Washing Bucket (4L capacity)
- Çamaşır sepeti
- Rack Bar (4 pcs)
- Curing Table
- Deveboynu Işık
- Altıgen Anahtar Seti
- Kullanıcı Kılavuzu
- Güç Adaptörü
Şekil 3.1: All components included in the ANYCUBIC Wash and Cure 3.0 package.
4. Kurulum Kılavuzu
- Paketi aç: Tüm bileşenleri dikkatlice ambalajından çıkarın.
- Atama: Ana üniteyi sağlam, düz bir yüzeye ve iyi havalandırılan bir alana yerleştirin.
- Güç Bağlantısı: Connect the power adapter to the unit and then to a power outlet.
- Gooseneck Light Installation: Insert the gooseneck light into its designated port on the main unit.
- Washing Bucket Preparation:
- For washing, place the washing basket inside the washing bucket.
- Fill the washing bucket with your chosen cleaning solution (e.g., IPA) up to the appropriate level, ensuring it covers the models to be cleaned.
- Curing Table Preparation: For curing, ensure the curing table is placed on the rotating platform.
Video 4.1: Resmi olarak bittiview of the Wash and Cure 3.0, demonstrating its features and basic setup.
5. Kullanım Talimatları
5.1. Washing Mode
- Prepare Models: Remove printed models from the build plate. For models still on the build plate, use the hanging cleaning mode. For detached models, place them in the washing basket.
- Place Washing Bucket: Position the washing bucket with the models and cleaning solution onto the main unit's platform. Ensure the UV-blocking cover is in place.
- Yıkama Modunu Seçin: Press the "Wash" button on the control panel.
- Zaman Ayarı: Use the rotary knob to set the desired washing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
- Yıkamaya Başlayın: Press the Start/Stop button to begin the washing cycle. The internal propeller will agitate the cleaning solution.
- Tamamlama: The machine will beep when the cycle is complete. Carefully remove the models and allow them to dry.
Şekil 5.1: Dual cleaning modes for models on a build plate (hanging) or detached (basket).
Video 5.1: Demonstration of the washing process in the ANYCUBIC Wash and Cure 2.0 machine, which shares similar washing mechanisms with the 3.0 model.
5.2. Curing Mode
- Place Models: After washing and drying, place the models on the curing table.
- Position Curing Table: Place the curing table with models onto the main unit's rotating platform. Ensure the UV-blocking cover is in place.
- Kürleme Modunu Seçin: Press the "Cure" button on the control panel.
- Zaman Ayarı: Use the rotary knob to set the desired curing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
- Activate Gooseneck Light (Optional): Press the "FlexiCure" button to activate the gooseneck light for targeted curing of complex areas.
- Kürlemeye Başlayın: Press the Start/Stop button to begin the curing cycle. The platform will rotate, and UV lights will activate.
- Tamamlama: The machine will beep when the cycle is complete. Remove the fully cured models.
Şekil 5.2: The gooseneck light provides localized strengthening and uniform curing for intricate details on 3D models.
Video 5.2: A user demonstrating the curing process with the ANYCUBIC Wash and Cure station, highlighting its ease of use.
6. Bakım
- Çamaşır kovasının temizlenmesi: Regularly clean the washing bucket and basket to prevent resin buildup. Dispose of used cleaning solution responsibly according to local regulations.
- Ünitenin Temizlenmesi: Wipe down the exterior of the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- UV Işık Bakımı: Keep the UV lights and gooseneck light clean and free of dust or resin residue to ensure optimal curing performance.
- Depolamak: When not in use, store the unit in a cool, dry place away from direct sunlight.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Cihaz açılmıyor. | Güç kablosu bağlı değil; elektrik prizinde sorun var. | Güç kablosu bağlantısını kontrol edin; farklı bir priz deneyin. |
| Washing/Curing cycle does not start. | Top cover not properly closed; mode not selected. | Ensure the UV-blocking cover is securely in place; select desired mode (Wash/Cure). |
| Models are not clean after washing. | Insufficient washing time; dirty cleaning solution; incorrect IPA concentration. | Increase washing time; replace cleaning solution; ensure proper IPA concentration. |
| Models are sticky after curing. | Insufficient curing time; models not dry before curing; UV lights are dirty. | Increase curing time; ensure models are completely dry; clean UV lights. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Örnek | Yıka ve Kürle 3 |
| Ürün Boyutları | 8.86 x 8.66 x 14.88 inç |
| Ürün Ağırlığı | 0.01 ons |
| Marka | HERHANGİ BİR KÜPİK |
| Malzeme | PC+metal |
| Renk | Çok renkli |
| Maximum Cleaning Volume | 165 x 100 x 180 mm (4L bucket) |
| UV Işığı | 10 adet 405nm + Esnek Kollu Işık |
| Maksimum Kürleme Boyutu | Φ160x180 mm |
| Zamanlayıcı | 1-30 minutes adjustable |
Şekil 8.1: Detailed comparison of Wash and Cure 3 and Wash and Cure 3 Plus specifications.
9. Garanti ve Destek
For warranty information, technical support, or service inquiries, please refer to the official ANYCUBIC website veya doğrudan müşteri hizmetleriyle iletişime geçin. Garanti talepleri için satın alma kanıtı olarak satın alma makbuzunuzu saklayın.
Ziyaret edebilirsiniz ANYCUBIC Resmi Mağazası Daha fazla ürün ve destek kaynağı için.
