1. Giriş
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Genmitsu 300W Air-Cooled Brush DC Spindle Motor and its accompanying adjustable switching power supply. Please read these instructions thoroughly before use to ensure proper functionality and to prevent damage.
2. Ürün Bittiview
The Genmitsu 300W Spindle Motor kit is designed for CNC machining applications, offering an air-cooled brush DC motor with an adjustable power supply for variable speed control.
2.1 Dahil Bileşenler
- 300W Brush DC Spindle Motor with ER11 Collet
- 0-48V Output Adjustable Switching Power Supply
- 52mm Spindle Clamp
- Montaj Donanımı (vidalar)
- Wiring for connections
- Speed Control Potentiometer
Şekil 1: Üzeriview of the Genmitsu 300W Spindle Motor Kit components, including the spindle motor, power supply, clamp, and wiring.
2.2 Temel Özellikler
- Air-Cooled Design: Uzun süreli çalışma imkanı sağlar.
- Ayarlanabilir Çıkış Hacmitage: The power supply offers a 0-48V output, enabling variable spindle speeds.
- ER11 Collet: Provides secure tool holding.
- Sağlam Yapı: Chrome-plated brush DC motor for durability.
3. Özellikler
| Şartname | Değer |
|---|---|
| Marka | Genmitsu |
| Model Numarası | 101-60-SPM300 |
| Mil Gücü | 300W |
| Mil Tipi | Brush DC Motor |
| Cilttage Aralık | 12-48V DC |
| Hız Aralığı | 3000-12000 r/min (12V-3000r/min, 24V-6000r/min, 36V-9000r/min, 48V-12000r/min) |
| Radial Run Out | 0.01-0.04 mm |
| Pens Tipi | ER11 |
| Mil Çapı | 52mm |
| Güç kaynağı çıkışı | 0-48V DC, 10A (output current determined by load) |
| Malzeme | Alüminyum |
| Ürün Ağırlığı | 2.05 Kilogram (4.51 pound) |
4. Kurulum Talimatları
4.1 Mounting the Spindle Motor
- Ensure your CNC machine is powered off and disconnected from the main power source.
- Secure the 52mm spindle clamp to the Z-axis of your CNC machine using appropriate hardware. Note: For 3018 series CNC machines, an additional 52mm diameter motor mount may be required. The Genmitsu Aluminum Z Axis Spindle Motor Mount (B0BXRX85WM) is a compatible option.
- Insert the 300W spindle motor into the 52mm clamp ve cl'yi sıkınamp screws to hold it firmly in place.
Figure 2: The 300W spindle motor installed within a 52mm clamp on a CNC machine's Z-axis.
4.2 Wiring the Power Supply and Spindle
- Connect the AC input of the power supply to a suitable power source (100-120V AC or 200-240V AC, depending on your region and power supply model). Ensure proper grounding.
- Connect the red wire from the spindle motor to the '+V' terminal on the power supply's DC output.
- Connect the black wire from the spindle motor to the '-V' terminal on the power supply's DC output.
- Connect the speed control potentiometer to the designated terminals on the power supply for variable voltage output control. Refer to the power supply's specific wiring diagram for precise connections.
Figure 3: The 0-48V adjustable switching power supply unit, showing input and output terminals.
Figure 4: The power supply connected to the speed control potentiometer for adjusting output voltage.
5. Kullanım Talimatları
5.1 Powering On and Speed Adjustment
- After ensuring all connections are secure and correct, connect the power supply to the main power source.
- Use the speed control potentiometer to adjust the output voltage. Turning the knob will vary the DC voltage supplied to the spindle motor, thereby changing its rotational speed.
- Monitor the spindle speed. The approximate speeds are: 12V for 3000 r/min, 24V for 6000 r/min, 36V for 9000 r/min, and 48V for 12000 r/min.
Şekil 5: Yakın çekim view of the 300W air-cooled brush DC spindle motor with ER11 collet.
5.2 Tool Installation (ER11 Collet)
- Ensure the spindle motor is completely stopped and powered off before changing tools.
- Unscrew the ER11 collet nut from the spindle shaft.
- Insert the desired ER11 collet into the collet nut.
- Insert the cutting tool (end mill, engraving bit, etc.) into the collet. Ensure the tool shank matches the collet size.
- Screw the collet nut with the tool back onto the spindle shaft and tighten it securely using a wrench. Do not overtighten.
6. Bakım
- Düzenli Temizlik: Keep the spindle motor and power supply free from dust and debris. Use compressed air to clean the cooling fins of the spindle and the vents of the power supply.
- Bağlantıları Kontrol Edin: Tüm elektrik bağlantılarını periyodik olarak sıkılık ve aşınma veya hasar belirtileri açısından kontrol edin.
- Spindle Clamp: Ensure the spindle clamp remains securely tightened to prevent movement during operation.
- Fırçanın Değiştirilmesi: As a brush DC motor, the carbon brushes will wear over time. Refer to Genmitsu support for guidance on brush inspection and replacement if performance degrades.
7. Sorun Giderme
- Mil Dönmüyor:
- Check all power connections to the power supply and from the power supply to the spindle motor.
- Ensure the power supply is receiving AC input.
- Verify the potentiometer is correctly wired and adjusted.
- Inconsistent Spindle Speed:
- Gevşek kablo bağlantıları olup olmadığını kontrol edin.
- Ensure the potentiometer is functioning correctly.
- Verify the load on the spindle is not excessive, as output current is load-dependent.
- Aşırı Titreşim/Gürültü:
- Ensure the spindle motor is securely mounted in its clamp.
- Check if the ER11 collet and cutting tool are properly installed and balanced.
- Inspect the spindle's internal fan for any obstructions or imbalance.
- Motorun Aşırı Isınması:
- Ensure adequate airflow around the spindle motor and power supply.
- Verify the cooling fan on the spindle is operating.
- Reduce the cutting depth or feed rate if the motor is consistently overheating during operation.
8. Garanti ve Destek
For warranty information, technical support, or replacement parts, please contact Genmitsu customer service through their official website or the platform where the product was purchased. Provide your model number (101-60-SPM300) and purchase details for efficient assistance.
