Google Nest Learning Thermostat & Smart Plugs User Manual

giriiş

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Google Nest T3019US Learning Thermostat 3rd Gen and the accompanying Deco Gear WiFi Smart Plugs. Please read this manual thoroughly before using the devices to ensure proper functionality and safety.

Image: The Google Nest Learning Thermostat (top) and two Deco Gear WiFi Smart Plugs (bottom).

Önemli Güvenlik Bilgileri

Always adhere to the following safety guidelines to prevent damage to the devices or personal injury:

• Ensure power to your HVAC system is turned off at the circuit breaker before installing the thermostat.
• The Google Nest Thermostat operates on 24 Volt (AC). Verify your system's compatibility before installation.
• Do not attempt to open or modify the devices. Refer all servicing to qualified personnel.
• Keep smart plugs away from water or damp ortamlar.
• Do not overload the smart plugs beyond their rated electrical capacity.

Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• 1 x Google Nest Learning Thermostat (3rd Gen)
• 2 x Deco Gear WiFi Smart Plugs
• 1 x Wiring plate (for Nest Thermostat installation)

Image: Google Nest Learning Thermostat (left) and Deco Gear WiFi Smart Plugs (right).

Kurulum Kılavuzu

Google Nest Learning Thermostat Installation

1. Gücü Kapatın: Sigortanızı bulun ve ısıtma ve soğutma sisteminizin elektriğini kesin.
2. Eski Termostatı Çıkarın: Carefully remove your old thermostat from the wall. Take a picture of the wiring before disconnecting any wires.
3. Install Nest Base: Mount the Nest wiring plate to the wall using the provided screws. Ensure it is level.
4. Kabloları Bağlayın: Connect the wires from your HVAC system to the corresponding terminals on the Nest base. Refer to the wiring diagram provided with your Nest Thermostat for specific connections. A C-wire is generally recommended for consistent power.
5. Attach Display: Snap the Nest display onto the base.
6. Gücü Geri Yükle: Sigortadan elektriği tekrar açın.
7. İlk kurulum: Follow the on-screen instructions on the Nest display to connect to your Wi-Fi network and set up your preferences. Download the Google Home or Nest app to complete the setup and control your thermostat remotely.

Image: Dimensions of the Google Nest Learning Thermostat: 3.3 inches (width) x 3.3 inches (depth) x 1.1 inches (height).

Deco Gear WiFi Smart Plug Setup

1. Eklenti: Plug the Deco Gear Smart Plug into a standard wall outlet.
2. İndir uygulaması: Download the appropriate smart home app (e.g., Tuya Smart or a compatible app) from your device's app store.
3. Kayıt Ol/Giriş Yap: Uygulamayı açın ve yeni bir hesap kaydedin veya zaten bir hesabınız varsa giriş yapın.
4. Cihaz Ekle: Follow the in-app instructions to add a new device. The smart plug will typically enter pairing mode automatically (indicated by a blinking light).
5. Wi-Fi'ye bağlanın: Select your 2.4GHz Wi-Fi network and enter the password. The app will then connect to the smart plug.
6. Integrate with Voice Assistant: To use voice control, link your smart home app account to your Google Assistant or Amazon Alexa account through their respective apps.

Operasyon

Google Nest Learning Thermostat Operation

• Sıcaklık Ayarı: Rotate the outer ring of the thermostat to adjust the target temperature. The display will show the current and target temperatures.
• Modlar: Press the display to access the main menu. Here you can switch between heating, cooling, or eco modes.
• Learning Feature: The Nest Thermostat learns your preferred temperatures and schedules over time, automatically adjusting to your habits.
• Uzaktan kumanda: Use the Google Home or Nest app on your smartphone to control the thermostat from anywhere.
• Ses Kontrolü: Integrate with Google Assistant or Amazon Alexa to control your thermostat using voice commands.

Image: The Nest Thermostat display showing 'COOLING' mode with a target temperature of 75 degrees Fahrenheit.

Deco Gear WiFi Smart Plug Operation

• Manuel kontrol: Press the power button on the side of the smart plug to manually turn connected devices on or off.
• Uygulama Kontrolü: Use the smart home app to remotely turn devices on/off, set schedules, and create automation routines.
• Planlama: Set daily or weekly schedules for devices plugged into the smart plugs to turn on or off automatically.
• Ses Kontrolü: Once integrated, use voice commands with Google Assistant or Amazon Alexa to control the smart plugs (e.g., "Hey Google, turn on the lamp").

Bakım

• Temizlik: Wipe the surfaces of the thermostat and smart plugs with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Yazılım Güncellemeleri: Ensure your Nest Thermostat and smart home apps are updated to the latest software versions for optimal performance and security. Updates for the Nest Thermostat are typically automatic when connected to Wi-Fi.
• Wi-Fi Bağlantısı: Periodically check that both devices maintain a stable Wi-Fi connection.

Sorun giderme

Teknik Özellikler

Garanti ve Destek

For warranty information and detailed support, please refer to the official Google Nest website or contact Google customer service. Keep your proof of purchase for any warranty claims.

Most products come with a standard return policy, typically allowing returns within 30 gün of purchase. Please check the retailer's specific return policy at the time of purchase.