AMX NX-3200 NetLinx NX Integrated Controller User Manual

1. Giriş

The AMX NX-3200 NetLinx NX Integrated Controller is designed for advanced control and automation in various environments, including large lecture halls, boardrooms, media rooms, and integrated homes. It offers robust security features, such as NX Master Security firmware and Dual NIC, to ensure secure communication over computer networks, meeting IT industry security standards. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your NX-3200 controller.

Figure 1: AMX NX-3200 NetLinx NX Integrated Controller, showing the rear panel and side view.

2. Güvenlik Bilgileri

Before operating the AMX NX-3200, read and understand all safety instructions. Retain this manual for future reference.

• Aşırı ısınmayı önlemek için cihazın iyi havalandırılan bir alana kurulduğundan emin olun.
• Only use the power supply provided or specified by AMX.
• Cihazı neme, yağmura veya aşırı sıcaklıklara maruz bırakmayın.
• Cihazın üzerine ağır nesneler koymaktan kaçının.
• Tüm bakım işlemlerini yetkili servis personeline yaptırın. Üniteyi kendiniz açmaya veya onarmaya çalışmayın.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• AMX NX-3200 NetLinx NX Integrated Controller
• Güç Kaynağı (12VDC)
• Montaj Donanımı (varsa)
• Dokümantasyon (bu kılavuz, hızlı başlangıç ​​rehberi)

4. Ürün Bittiview

4.1 Ön Panel

Figure 2: Front Panel of the AMX NX-3200.

The front panel of the NX-3200 provides status indicators and a TO PC port for direct connection. Key components include:

• TO PC (USB) Port: For direct connection to a computer for initial configuration and firmware updates.
• LINK/ACT LED: Indicates network link status and activity.
• DURUM LED'i: Displays the operational status of the controller.
• OUTPUT LED: Indicates output activity.
• GİRİŞ LED'i: Indicates input activity.
• ICS LAN LED: Status indicator for the ICS LAN connection.
• SERIAL (TX/RX) LEDs: Indicators for transmit and receive activity on serial ports 1-8.
• RELAYS LEDs: Status indicators for relay outputs 1-8.
• IR/SERIAL LEDs: Indicators for IR/Serial ports 1-8.
• I/O LEDs: Status indicators for I/O ports 1-8.

4.2 Arka Panel

Figure 3: Rear Panel of the AMX NX-3200.

The rear panel provides all necessary connections for integrating the NX-3200 into your system. These include:

• RS-232 Ports (1-8): For serial communication with various devices.
• RS-232/422/485 Ports (1-8): Configurable serial ports for flexible communication.
• Relay Ports (1-8): For controlling external devices requiring contact closure.
• I/O Ports (1-8): General purpose input/output ports.
• IR/Serial Ports (1-8): For infrared control or additional serial communication.
• ICS LAN Port: Ethernet port for network connectivity and control.
• LAN 10/100 Port: Additional Ethernet port for network connectivity, supporting Dual NIC functionality.
• USB Ports (Type A and B): For connecting USB devices or for direct PC connection.
• PWR (12VDC) Input: Güç giriş konnektörü.
• YAPILANDIRMA Düğmesi: For system configuration and reset functions.

5. Kurulum

5.1 Kontrolörün Montajı

The NX-3200 is designed for rack mounting or placement on a flat surface. Ensure adequate ventilation around the unit.

• For rack mounting, secure the controller using appropriate rack ears and screws (sold separately or included in package).
• When placing on a surface, ensure it is stable and free from obstructions to airflow.

5.2 Gücün Bağlanması

1. Connect the provided 12VDC power supply to the PWR input on the rear panel.
2. Güç kaynağını uygun bir elektrik prizine takın.
3. The controller will power on automatically. Observe the STATUS LED on the front panel.

5.3 Ağ Bağlantıları

The NX-3200 features Dual NIC for enhanced network security and flexibility.

• ICS LAN: Connect an Ethernet cable from your network switch or router to the ICS LAN port for control network communication.
• LAN 10/100: Connect an Ethernet cable to the LAN 10/100 port for a secondary network connection, if required for specific applications or network segmentation.

5.4 Connecting Control Devices

Connect your AV equipment, HVAC systems, lighting, and other devices to the appropriate ports on the rear panel.

• Seri Cihazlar: Use RS-232, RS-422, or RS-485 ports as needed. Refer to the device's documentation for wiring requirements.
• Relay Devices: Connect devices requiring contact closure to the Relay ports.
• I/O Devices: Connect sensors or other input/output devices to the I/O ports.
• IR Yayıcılar: Connect IR emitters to the IR/Serial ports for controlling IR-controlled equipment.

5.5 İlk Yapılandırma

Initial configuration is typically performed using AMX programming software via the TO PC USB port or over the network.

1. Connect a computer to the TO PC USB port on the front panel using a standard USB cable.
2. Install the necessary AMX software (e.g., NetLinx Studio) on your computer.
3. Follow the software instructions to discover the controller and upload your control program.
4. Alternatively, if the controller has a default IP address or is configured for DHCP, it can be accessed over the network.

6. Kontrol Cihazının Çalıştırılması

6.1 LED Göstergelerini Anlama

The front panel LEDs provide visual feedback on the controller's status and activity:

• DURUM LED'i:
  • Düz Yeşil: Normal çalışma.
  • Yanıp Sönen Yeşil: Booting up or performing a task.
  • Düz Kırmızı: Error or fault condition.
• LINK/ACT LED:
  • Düz Yeşil: Network link established.
  • Yanıp Sönen Yeşil: Ağ etkinliği.
• Other TX/RX, RELAYS, IR/SERIAL, and I/O LEDs illuminate to indicate data transmission, reception, or active states on their respective ports.

6.2 Temel İşlemler

Once configured and programmed, the NX-3200 operates autonomously based on the loaded control program. User interaction typically occurs through connected control interfaces (e.g., touch panels, keypads, web interfaces) that communicate with the controller.

• Ensure all controlled devices are powered on and connected correctly.
• Use your programmed control interface to send commands to the NX-3200, which then executes the corresponding actions (e.g., turning on a projector, adjusting volume, closing blinds).

6.3 Secure Communication

The NX-3200 supports NX Master Security firmware for secure communication. Ensure your network infrastructure and programming leverage these features for enhanced data protection, especially in enterprise and government environments.

7. Bakım

7.1 Temizlik

• Temizlemeden önce elektrik bağlantısını kesin.
• Ünitenin dış yüzeyini silmek için yumuşak, kuru bir bez kullanın.
• Do not use liquid cleaners or aerosol sprays, as they may damage the unit.
• Havalandırma açıklıklarının toz ve kirden arındırılmış olduğundan emin olun.

7.2 Firmware Güncellemesi

Periodically check the AMX website for firmware updates. Keeping your controller's firmware up-to-date ensures optimal performance, security, and access to new features.

1. Download the latest firmware from the official AMX support portal.
2. Follow the instructions provided with the firmware update package for installation, typically using AMX programming software.

8. Sorun Giderme

If you encounter issues with your NX-3200, refer to the following common problems and solutions:

8.1 Fabrika Ayarlarına Sıfırlama

A factory reset will erase all custom configurations and programming, restoring the controller to its default settings. Use this as a last resort.

1. Disconnect power from the NX-3200.
2. Basılı tutun YAPILANDIRMA arka paneldeki düğmeye basın.
3. While holding the CONFIG button, reconnect power.
4. Continue holding the CONFIG button until the STATUS LED changes color or flashes in a specific pattern (refer to AMX documentation for exact sequence), then release.
5. The controller will reboot with factory default settings.

9. Özellikler

Technical specifications for the AMX NX-3200 NetLinx NX Integrated Controller:

10. Garanti ve Destek

For warranty information and technical support, please refer to the official AMX website or contact your authorized AMX dealer.

• AMX Official Webalan: www.amx.com
• Teknik Destek: Contact information can be found on the AMX webSitenin destek bölümü.
• Destek ekibiyle iletişime geçerken satın alma fişinizi ve ürün seri numaranızı elinizin altında bulundurun.