1. Giriş
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Meross CS11 Combo Smoke and Carbon Monoxide Alarm. Please read this manual thoroughly before installation and keep it for future reference. This device is designed to detect both smoke and carbon monoxide (CO) to enhance your home safety.
The Meross CS11 alarm complies with European standards EN 14604 for smoke alarms and EN 50291 for carbon monoxide alarms.
2. Ürün Özellikleri
- Çift Sensör Teknolojisi: Combines a photoelectric smoke sensor and an electrochemical carbon monoxide sensor for comprehensive protection.
- 10 Yıllık Pil Ömrü: Equipped with a sealed 3V lithium battery designed to last for 10 years, providing continuous protection without battery replacement.
- Loud 85 dB Alarm: Emits a powerful 85-decibel alarm at 3 meters to alert occupants effectively in case of an emergency.
- Test/Sessiz Butonu: Allows for easy testing of the alarm's functionality and silencing false alarms.
- Tri-Color LED Indicator: Provides clear visual status indications for normal operation (green), fault/low battery/end-of-life (amber), and alarm/test/silence (red).
- Automatic Self-Verification: The device performs regular self-checks to ensure proper functioning.
- Kolay Kurulum: Comes with a mounting bracket and screws for quick and simple ceiling or wall installation.
- Wide Detection Area: Detects carbon monoxide over an area of up to 40 square meters.
3. Paket İçeriği
Paketi açtığınızda lütfen aşağıda listelenen tüm öğelerin mevcut ve iyi durumda olduğundan emin olun:
- 1 x Meross CS11 Combo Smoke and Carbon Monoxide Alarm
- 1 x Montaj Braketi
- 2 x Vida
- 1 x Kullanım Kılavuzu
4. Güvenlik Bilgileri
Please read and understand all safety instructions before installing and operating the alarm. Failure to follow these instructions may result in property damage, injury, or death.
- This alarm is designed for indoor use only.
- Do not paint the alarm. Paint can clog the sensor openings and interfere with the alarm's ability to detect smoke or CO.
- Yüksek nem, aşırı sıcaklık veya aşırı toz bulunan alanlara monte etmeyin.
- Test the alarm monthly and after any battery change or relocation.
- The 10-year battery is sealed and non-replaceable. Do not attempt to open the unit or replace the battery.
- This device is not intended to replace proper installation and maintenance of fuel-burning appliances, nor the ventilation systems of these appliances.
- Carbon monoxide is invisible, odorless, and tasteless. This alarm is designed to detect CO gas from any source of combustion.
5. Kurulum ve Kurulum
Proper placement and installation are crucial for the effective operation of your Meross CS11 alarm.
5.1 Recommended Locations
- Install at least one alarm on every level of your home, including basements.
- Place alarms in hallways outside of sleeping areas.
- For best CO detection, install an alarm in or near rooms where fuel-burning appliances are located.
- For best smoke detection, install in the center of the ceiling. If ceiling installation is not possible, install on a wall, at least 10-30 cm (4-12 inches) from the ceiling.
5.2 Kaçınılması Gereken Yerler
- Within 1 meter (3 feet) of cooking appliances, heating vents, or ceiling fans.
- In extremely dusty, dirty, or greasy areas.
- In direct sunlight or areas with extreme temperature fluctuations.
- In areas with high humidity, such as bathrooms.
5.3 Kurulum Adımları
- Montaj Yerini Hazırlayın: Choose a suitable location according to the guidelines above.
- Montaj Braketini Takın: Use the provided screws to securely attach the mounting bracket to the ceiling or wall.
- Mount the Alarm: Align the alarm with the mounting bracket and twist clockwise until it clicks into place. The alarm will automatically activate upon proper installation.
- Alarmı Test Edin: After installation, press and hold the Test/Silence button for a few seconds to ensure the alarm sounds. Refer to the "Operating Instructions" section for more details on testing.
Figure 5.3.1: Easy Installation of the Meross CS11 Alarm. The image depicts a person on a ladder installing the alarm on a ceiling, with an inset showing the mounting bracket and screws.
6. Kullanım Talimatları
6.1 LED Gösterge Durumu
Figure 6.1.1: Tri-color LED Indication. This image illustrates the different LED colors and their corresponding alarm statuses.
- Yeşil LED: Flashes once every 60 seconds – Indicates normal operation (Standby).
- Sarı LED: Flashes once every 60 seconds with a chirp – Indicates a fault, low battery, or end-of-life.
- Kırmızı LED: Flashes rapidly with loud alarm – Indicates smoke or CO detection (Alarm).
- Kırmızı LED: Flashes during test or silence mode.
6.2 Alarmın Test Edilmesi
It is recommended to test your alarm monthly to ensure it is functioning correctly.
- Press and hold the Test/Silence button located on the front of the alarm.
- The alarm will emit a series of loud beeps, and the red LED will flash. This indicates the alarm is working.
- Release the button. The alarm will return to normal operation.
Figure 6.2.1: Loud Buzzer Alarm. This image visually represents the 85dB alarm sound emitted by the device.
6.3 Alarmı Susturma
In case of a non-emergency alarm (e.g., cooking smoke), you can temporarily silence the alarm:
- Test/Sessizleştirme düğmesine bir kez basın.
- The alarm will enter a temporary silence period (typically 5-10 minutes). The red LED will continue to flash during this period.
- If the smoke or CO concentration remains high after the silence period, the alarm will reactivate.
Warning: Do not silence the alarm without first investigating the cause of the alarm. If the cause is unknown, evacuate the premises immediately.
7. Bakım
Regular maintenance ensures the longevity and reliability of your Meross CS11 alarm.
- Aylık Test: Test the alarm monthly using the Test/Silence button.
- Temizlik: Gently vacuum the alarm cover once a month using a soft brush attachment to remove dust and debris. Do not use cleaning agents or solvents.
- Pil: The battery is sealed and designed for 10 years of operation. Do not attempt to replace it. When the battery is low or the unit reaches its end-of-life, the amber LED will flash with a chirp. Replace the entire unit.
8. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Alarm chirps every 60 seconds (Amber LED). | Low battery, fault, or end-of-life. | The battery is sealed. If the alarm is chirping, it indicates the unit needs to be replaced. |
| Alarm sounds frequently without apparent smoke/CO. | False alarm due to cooking fumes, steam, dust, or improper placement. | Press the Test/Silence button. Relocate the alarm if false alarms persist due to environmental factors. Clean the alarm. |
| Test sırasında alarm çalmaz. | Unit not activated, battery depleted, or unit malfunction. | Ensure the alarm is properly mounted and activated. If it still doesn't work, the unit may be faulty and needs replacement. |
| Green LED not flashing. | Cihaz etkinleştirilmemiş veya arızalı. | Ensure the alarm is properly mounted and activated. If the issue persists, the unit may be faulty and needs replacement. |
9. Özellikler
| Model Numarası | CS11 |
| Güç Kaynağı | Sealed 3V Lithium Battery (non-replaceable, 10-year life) |
| Sensör Tipi | Fotoelektrik (Duman), Elektrokimyasal (CO) |
| Alarm Sesi | 3 metre mesafede ≥ 85 dB |
| CO Algılama Aralığı | 40 m²'ye kadar |
| Çalışma Sıcaklığı | 0°C ila 40°C (32°F ila 104°F) |
| Çalışma Nemi | ≤ %95 RH (yoğuşmasız) |
| Boyutlar (Çap x Yükseklik) | 120 mm x 28 mm (yaklaşık 4.72 inç x 1.1 inç) |
| Ağırlık | 135 gram (yaklaşık 4.76 oz) |
| Sertifikalar | EN 14604:2005/AC:2008 (Smoke), EN 50291-1:2010 (CO) |
| Malzeme | ABS |
Figure 9.1.1: Elegant and Compact Design with Component Overview. This image highlights the key external features and dimensions of the alarm.
10. Garanti Bilgileri
Specific warranty details are not provided in the product information. Please refer to the official Meross website or contact Meross customer support for detailed warranty terms and conditions applicable to your region.
11. Müşteri Desteği
For technical assistance, troubleshooting, or general inquiries, please visit the official Meross support page or contact their customer service. Contact information can typically be found on the Meross websitede veya ürün ambalajında yer almamaktadır.
Ayrıca ziyaret edebilirsiniz Meross Brand Store on Amazon Daha fazla ürün bilgisi için.
