1. Ürün Bittiview
The TCP 07106 L9PLVD5041K is a 9-watt LED BR30 bulb designed as a direct replacement for traditional CFL (Compact Fluorescent Lamp) bulbs. It features a 4-pin (G24q/GX24q) base, operates on 120/277 volts, and emits a cool white light at 4100K. This LED bulb is ballast compatible and dimmable, offering energy efficiency and a long operational lifetime.

An image showing the TCP 07106 LED BR30 bulb. It features a white, reflector-style bulb head tapering down to a 4-pin base, designed for compatibility with CFL fixtures.
2. Güvenlik Bilgileri
Please read and understand all instructions before installation and use. Retain this manual for future reference.
- Elektrik Çarpması Riski: Always turn off power at the circuit breaker or fuse box before installing or servicing the fixture.
- Sadece İç Mekanda Kullanım: This bulb is designed for indoor applications. Do not use in wet locations or where directly exposed to water.
- Balast Uyumluluğu: This LED bulb is designed to be ballast compatible. Ensure your existing ballast is compatible with LED PL lamps. Consult a qualified electrician if unsure.
- Kısılabilirlik: This product is dimmable. Ensure your dimmer switch is compatible with LED lighting to avoid performance issues or damage.
- Çalışma Sıcaklığı: Do not install in fixtures that exceed the recommended operating temperature range.
- Sökmeyin: Do not attempt to disassemble or modify the bulb. This will void the warranty and may cause damage or injury.
- Uygun Bertaraf: Dispose of the bulb according to local regulations.
3. Ürün Özellikleri
- Işık Kaynağı Türü: NEDEN OLMUŞ
- Netage: 9 Watt
- Cilttage: 120/277 Volt
- Parlaklık: 1150 Lümen
- Renk Sıcaklığı: 4100 Kelvin (Soğuk Beyaz)
- Ampul Şekli Boyutu: BR30
- Taban Tipi: 4-Pin (G24q/GX24q)
- Kısılabilir: Evet
- Ortalama Yaşam Süresi: 50,000 saat
- Renksel Geriverim İndeksi (CRI): 80
- Akkor Eşdeğeri: 18 Watt
- Sertifikasyon: UL, KÜ
4. Kurulum ve Kurulum
This LED bulb is designed to replace existing CFL bulbs in compatible fixtures. Follow these steps for safe installation:
- Gücü Kapatın: Before beginning installation, ensure the power to the fixture is completely turned off at the circuit breaker or fuse box. Verify the power is off by attempting to turn on the light switch.
- Mevcut Ampulü Kaldır: Carefully remove the old CFL bulb from the fixture. Allow it to cool if it has been recently in use.
- Donanımı inceleyin: Check the fixture for any damage or wear. Ensure the socket is clean and free of debris.
- Yeni LED ampulü takın: Align the 4 pins of the TCP 07106 LED bulb with the corresponding slots in the fixture's G24q/GX24q base. Gently push the bulb into the socket until it is firmly seated. Do not force the bulb, as this may damage the pins or the socket.
- Gücü Geri Yükle: Ampul güvenli bir şekilde takıldıktan sonra, devre kesici veya sigorta kutusundan armatüre giden elektriği tekrar açın.
- Test İşlemi: Ampulün doğru çalışıp çalışmadığını doğrulamak için ışık anahtarını açın.
Not: This bulb is ballast compatible. No ballast bypass is required for installation in fixtures with compatible electronic ballasts. If the bulb does not light up, ensure the ballast is functioning correctly and is compatible with LED PL lamps. Consult a qualified electrician if you encounter issues.
5. Kullanım Talimatları
The TCP 07106 LED BR30 bulb operates like a standard light bulb once installed. It is dimmable, allowing you to adjust the light output with a compatible dimmer switch.
- Açma/Kapama İşlevi: Use your existing light switch to turn the bulb on or off.
- Karartma: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve the desired brightness level. Ensure your dimmer is rated for LED loads to prevent flickering or damage.
6. Bakım
The TCP 07106 LED BR30 bulb requires minimal maintenance due to its long lifespan.
- Temizlik: Ampulü temizlemek için, elektriğin kapalı olduğundan ve ampulün soğuk olduğundan emin olun. Yumuşak, kuru bir bezle nazikçe silin. Sıvı temizleyiciler veya aşındırıcı malzemeler kullanmayın.
- Yenisiyle değiştirme: With an average lifetime of 50,000 hours, frequent replacement is not anticipated. When replacement is necessary, follow the installation steps in Section 4.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Ampul yanmıyor. |
|
|
| Ampul titriyor veya vızıldıyor. |
|
|
| Işık çıkışı çok düşük veya çok yüksek. |
|
|
Sorun giderme adımları sorunu çözmezse, müşteri desteğiyle veya yetkili bir elektrikçiyle iletişime geçin.
8. Özellikler
| Model Numarası | 07106 (L9PLVD5041K) |
| Marka | Tpg |
| Işık Kaynağı Türü | NEDEN OLMUŞ |
| Netage | 9 Watt |
| Cilttage | 120/277 Volt |
| Parlaklık | 1150 Lümen |
| Renk Sıcaklığı | 4100 Kelvin (Soğuk Beyaz) |
| Ampul Şekli Boyutu | BR30 |
| Taban Tipi | 4-Pin (G24q/GX24q) |
| Kısılabilir | Evet |
| Ortalama Ömür | 50,000 saat |
| Renksel Geriverim İndeksi (CRI) | 80 |
| Akkor Eşdeğeri | 18 Watt |
| İç/Dış Mekan Kullanımı | Kapalı |
| Malzeme | Bakır (dahili bileşenler) |
| Sertifikalar | UL, KÜ |
| Ürün Ağırlığı | 6.7 ons |
| Paket Boyutları | 6.34 x 4.88 x 4.25 inç |
9. Garanti ve Destek
TCP products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or the official TCP website. In case of issues or questions not covered in this manual, please contact TCP customer support.
Üretici: Tpg
UPC: 762148071068
Parça Numarası: 07106
Daha fazla yardım için şu adresi ziyaret edin: TCP Store on Amazon or the official TCP webalan.