Axis M7104 Video Encoder User Manual

1. Giriş

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

Şekil 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. Güvenlik Bilgileri

• Sadece İç Mekanda Kullanım: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• Güç Kaynağı: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• Havalandırma: Cihazın aşırı ısınmasını önlemek için çevresinde yeterli havalandırma olduğundan emin olun. Havalandırma açıklıklarını kapatmayın.
• Montaj: Mount the device securely on a stable surface or rack.
• Temizlik: Temizlemeden önce elektriği kesin. Kuru ve yumuşak bir bez kullanın. Sıvı veya aerosol temizleyiciler kullanmayın.
• Servis: Bu ürüne kendiniz servis vermeye çalışmayın. Tüm servis işlemleri için kalifiye servis personeline başvurun.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• Axis M7104 Video Encoder Unit
• Güç Adaptörü
• Kurulum Kılavuzu / Dokümantasyon
• Montaj Braketi (varsa)

4. Kurulum

4.1 Fiziksel Bağlantılar

1. Connect Analog Cameras: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. Ağa bağlan: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. Gücü bağlayın: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 İlk Yapılandırma

After connecting the hardware, you will need to configure the encoder via its web arayüz:

• Cihazı Keşfet: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• Erişim Web Arayüz: Bir tane aç web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: İçinde web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• Ağ Ayarları: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• Canlı View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web arayüz.
• Kayıt: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• Etkinlik Yönetimi: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web interface or VMS.
• Uzaktan Erişim: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. Bakım

• Temizlik: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• Donanım Yazılımı Güncellemeleri: Axis Communications'ı düzenli olarak kontrol edin. website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• Çevresel Koşullar: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7. Sorun Giderme

Yaygın Sorunlar ve Çözümleri:

• Güç Yok:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • Elektrik prizinin çalışıp çalışmadığını kontrol edin.
• Ağ Bağlantısı Yok:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• Video Sinyali Yok:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Kameraların açık ve düzgün çalıştığından emin olun.
  • Check video settings in the encoder's web interface for the specific channel.
• Erişilemiyor Web Arayüz:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • Bilgisayarınızda erişimi engelleyebilecek herhangi bir güvenlik duvarı veya antivirüs yazılımını geçici olarak devre dışı bırakın.
  • Try using the Axis IP Utility to rediscover the device.

8. Özellikler

9. Garanti ve Destek

For detailed warranty information, technical support, and additional resources, please visit the official Axis Communications website. You can find product documentation, FAQs, and contact information for customer service.

Resmi Webalan: www.axis.com

Destek ekibiyle iletişime geçerken lütfen ürün model numaranızı (01679-001) ve seri numaranızı hazır bulundurun.