Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Giriş

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Güvenlik Bilgileri

• Kurulum ve çalıştırmadan önce tüm talimatları dikkatlice okuyun.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Cihazı çocukların erişemeyeceği yerde saklayınız.

3. Paket İçeriği

Paketin içinde tüm öğelerin mevcut olduğundan emin olun:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Montaj Braketi
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1 adet Hızlı Başlangıç ​​Kılavuzu (bu kılavuz)

4. Ürün Bittiview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Şekil 1: Ön view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Temel Bileşenler:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED Göstergesi: Provides status feedback (e.g., detection, low battery).
• Pil Bölmesi: Güç kaynağını barındırır.
• Montaj Noktaları: For secure installation on a wall.
• Tamper Anahtarı: Triggers an alarm if the sensor cover is opened.

5. Kurulum

5.1. Pil Kurulumu

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Sensörün Montajı

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Duvardaki vida yerlerini işaretlemek için montaj braketini şablon olarak kullanın.
3. İşaretli yerlere delikler açın ve dübelleri yerleştirin.
4. Montaj braketini verilen vidaları kullanarak duvara sabitleyin.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Sensörün Çalıştırılması

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED Gösterge Durumu

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Işık Yok: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Bakım

7.1. Temizlik

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Pil Değişimi

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Düzenli Kontroller

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Sorun Giderme

9. Özellikler

• Marka: Intelbras
• Modeli: IVP2000SF
• Güç Kaynağı: Pil ile çalışır
• Pil Tipi: Alkali
• Montaj Tipi: Duvara monte
• Uyumlu Cihazlar: Intelbras security systems and smart home hubs
• Ürün Ölçüleri: Yaklaşık 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 inç)
• Tespit Yöntemi: Pasif Kızılötesi (PIR)
• Algılama Aralığı: 12 metreye (39 feet) kadar
• Algılama Açısı: Yaklaşık 90 derece
• Çalışma Ortamı: Sadece iç mekanda kullanılabilir

10. Garanti Bilgileri

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webSiteyi ziyaret edin veya müşteri destekleriyle iletişime geçin. Garanti talepleri için satın alma belgenizi saklayın.

11. Destek

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webalan: Visit the official Intelbras webDestek kaynakları, SSS ve iletişim bilgileri için site.
• Telefon: Refer to the contact section on the Intelbras webYerel destek numaraları için site.