ONKRON G120-BLK Tek Monitör Duvar Montajı Kullanım Kılavuzu
Model: G120-BLK
giriiş
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
Güvenlik Bilgileri
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- Montaj yüzeyinin, montaj aparatı ve monitörünüzün toplam ağırlığını güvenli bir şekilde taşıyabileceğinden emin olun.
- 17.6 lbs (8 kg) maksimum ağırlık kapasitesini aşmayın.
- Bu monitör standı, 13 ila 34 inç arasındaki monitörler için tasarlanmıştır.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- Montaj sırasında çocukları ve evcil hayvanları uzak tutun.
Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- VESA Plakası
- Duvar Plakası
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- Alyan Anahtarı (6mm)
- Kullanım Kılavuzu
Kurulum ve Yükleme
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
Kurulum Video Kılavuzu
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
Adım 1: Matkap Deliklerinin İşaretlenmesi
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
Adım 2: Montajı Takma
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- Secure the wall plate to the wall using the appropriate screws and anchors. Ensure it is firmly attached and level.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- Use the provided Allen key to turn the screw:
- Dönüş saat yönünün tersi for lighter screens (to reduce tension).
- Dönüş saat yönünde for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal viewkonfor.
- Yükseklik Ayarı: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- Uzatma/Geri Çekme: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- Tilt: Parlamayı azaltmak ve tercih ettiğiniz açıyı bulmak için monitörün eğimini +90° ile -45° arasında ayarlayın. viewaçı.
- Döner: Swivel the monitor 180° left or right.
- Rotasyon: Rotate the monitor 360° for landscape or portrait orientation.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
Kablo Yönetimi
Utilize the integrated cable management system to keep your workspace tidy.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
Resim: Yakın çekim view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
Bakım
Düzenli bakım, monitör standınızın uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar.
- Temizlik: Montajı yumuşak bir bezle silin.amp Bez. Aşındırıcı temizleyicilerden veya çözücülerden kaçının.
- Periyodik Kontroller: Tüm vidaları ve bağlantıları düzenli olarak kontrol ederek sıkı olduklarından emin olun. Gerekirse tekrar sıkın.
- Gaz Yay Ayarı: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
Sorun giderme
Yaygın sorunlara yönelik çözümler için bu bölüme bakın.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Monitör sarkıyor veya istenilen yükseklikte kalmıyor. | Gaz yayının gerilimi monitörün ağırlığı için çok düşük. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | Gaz yayının gerilimi monitörün ağırlığı için çok yüksek. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Montaj aparatı dengesiz veya sallanıyor gibi görünüyor. | Gevşek bağlantılar veya yanlış duvar montajı. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | Eklem yerleri çok sıkı. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
Özellikler
- Modeli: G120-BLK
- Ekran Boyutu Uyumluluğu: 13 - 34 inç
- Ağırlık Kapasitesi: 2.2 - 17.6 lbs (1 - 8 kg)
- VESA Uyumluluğu: 75x75mm, 100x100mm
- Eğim Açısı: +90° ila -45°
- Dönme Açısı: 180°
- Rotasyon: 360°
- Yükseklik Ayarı: 11 inç (28 cm)
- Kol Uzatma: 3.5 inç (8.9 cm) ila 13.7 inç (34.8 cm)
- Malzeme: Alüminyum
- Ürün Ölçüleri: 16.34 x 2.28 x 6.61 inç (41.5 x 5.8 x 16.8 cm)
- Ürün Ağırlığı: 3.96 pound (1.8 kg)
Garanti ve Destek
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON webalan.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
İletişim Bilgileri: Please refer to the ONKRON website or product packaging for the most up-to-date contact details.
