1. Giriş
The WRINERY Pulse Oximeter Fingertip is designed to measure blood oxygen saturation levels (SpO2), pulse rate, and pulse strength. This device is intended for non-medical use, suitable for home and travel. It provides accurate and reliable data before and after strenuous activities. It is ideal for sports enthusiasts, aviators, trainers, bikers, mountain climbers, or anyone interested in monitoring their SpO2 on the go.
Note: This pulse oximeter is not intended for medical diagnosis or treatment.
2. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- 1 x WRINERY Finger Oxygen and Heart Rate Monitor
- 1 x Boyun Askısı
- 1 x Kullanım Kılavuzu (bu belge)
- 2 x AAA Pil
- 1 x Taşıma Çantası
Image: Contents of the WRINERY Pulse Oximeter package, showing the device, lanyard, two AAA batteries, and a black carrying case.
3. Kurulum
Follow these steps to prepare your pulse oximeter for first use:
- Pilleri Takın: Remove the back cover of the device. Insert the two AAA batteries into the battery compartment, ensuring correct polarity (+/-). Replace the back cover.
Image: The WRINERY Pulse Oximeter device shown with its accessories, illustrating the components involved in the initial setup, including the battery compartment.
4. Kullanım Talimatları
To obtain a reading:
- Parmağınızı yerleştirin: Cl'yi açamp of the oximeter. Insert one of your fingers (preferably the index or middle finger) into the rubber opening, ensuring your fingertip is aligned with the red light sensor.
- Cihazı Etkinleştir: CL'yi serbest bırakamp. The device will automatically switch on and begin measurement.
- Sonuçları Okuyun: Remain still. After approximately eight to ten seconds, your SpO2 (blood oxygen saturation) and Pulse Rate (PRbpm) will be displayed on the OLED screen.
For accurate readings, it is recommended to use the device in a stationary condition, avoiding movement during measurement.
Image: A finger being correctly inserted into the WRINERY Pulse Oximeter, highlighting the position for accurate measurement over the red light sensor.
Image: The WRINERY Pulse Oximeter's OLED display, indicating SpO2 value, power indicator, pulse bar graph, operating button, heart beat icon, pulse rate, and pulse waveform.
5. Özellikler
- Doğru ve Güvenilir: Provides precise measurements of blood oxygen levels and pulse rate within 8 seconds.
- Taşınabilir Tasarım: Compact and lightweight (approximately 65g / 1.95 ounces) with an included lanyard for easy carrying.
- Wide Finger Size Accommodation: Designed to fit a broad range of finger sizes, from children to adults.
- Minimum Power Consumption: Features an automatic power-off function when no finger is detected, extending battery life up to 15 hours with two AAA batteries.
- Crystal Clear OLED Display: Presents reading data on a bright and sharp OLED screen for enhanced visibility in various environments.
6. Özellikler
| Model Adı | YAZICI |
| Measuring Range SpO2 | %35~%100 |
| Measuring Range Pulse Rate (PR) | 25 BPM ~250 BPM |
| Piller | 2 x AAA pil (dahil) |
| Pil Ömrü | 15 saate kadar sürekli çalışma |
| Görüntü Türü | OLED |
| Renk | Siyah |
| Paket Boyutları | 3.19 x 2.24 x 2.13 inç |
| Ağırlık | 2.4 ounces (device only approx. 0.5 ounces) |
| Üretici | Hunan Doğru Biyo-Medikal Technology Co., Ltd. |
| ASIN | B07V3176CB |
7. Bakım
Proper maintenance ensures the longevity and accuracy of your device:
- Temizlik: Wipe the surface of the oximeter with a soft cloth dampened with medical alcohol or a mild disinfectant. Do not immerse the device in liquid.
- Depolamak: Cihazı serin, kuru bir yerde, doğrudan güneş ışığından, aşırı sıcaklıklardan ve nemden uzak tutarak saklayın.
- Pil Değişimi: Ekranda düşük pil göstergesi belirdiğinde pilleri değiştirin. Cihaz uzun süre kullanılmayacaksa, sızıntıyı önlemek için pilleri çıkarın.
- Etkiden Kaçının: Düşme veya darbelerden dolayı oluşabilecek hasarları önlemek için cihazı dikkatli tutun.
8. Sorun Giderme
If you encounter issues with your WRINERY Pulse Oximeter, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Güç açıldıktan sonra görüntü yok | Piller bitmiş veya yanlış takılmış. | Pilleri değiştirin veya doğru kutuplara dikkat ederek yeniden takın. |
| Yanlış veya istikrarsız okumalar | Finger not inserted properly; movement during measurement; cold fingers; nail polish or artificial nails. | Re-insert finger correctly; remain still; warm hands; remove nail polish/artificial nails. |
| Cihaz otomatik olarak kapanıyor | No finger detected for a period (normal auto-off function); low battery. | This is normal behavior if no finger is present. If a finger is present, check/replace batteries. |
9. Önemli Güvenlik Bilgileri
- This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
- Consult a medical professional for any health concerns.
- Çocukların erişemeyeceği yerde saklayın. Küçük parçalar boğulma tehlikesi oluşturabilir.
- Cihazı MRI veya CT ortamında kullanmayın.
- Do not use the device on the same limb simultaneously with a blood pressure cuff or other monitoring equipment.
10. Garanti ve Destek
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official WRINERY webLütfen garanti talepleriniz için satın alma belgenizi saklayın.