giriiş
The Fluid Audio FX50 is a 5-inch single point source coaxial reference monitor, designed for professional audio production and critical listening environments. This bi-amplified monitor delivers 90 watts of power with a frequency response of 49Hz to 22kHz (+/-3db). Its unique coaxial driver design ensures a coherent soundstage and precise imaging, making it an ideal tool for mixing and mastering.
Temel özellikler şunlardır:
- 5-inch Coaxial Studio Monitor
- Frequency response: 49Hz – 22KHz (+/- 3db)
- Crossover frequency: 2.9KHz
- Class D and DSP powered amplifikasyon
- Dual concentric "coaxial" driver for accurate sound reproduction
Ürün Bittiview
The FX50 monitor features a robust design with a front-loaded slot port for optimized bass output. The coaxial driver places the tweeter in the center of the woofer, creating a single point source for all frequencies, which enhances stereo imaging and depth of field.
Kurmak
Proper setup is crucial for optimal performance of your FX50 monitors. Ensure the monitors are placed on a stable surface, ideally at ear level, and equidistant from your listening position to create an equilateral triangle. The rear panel offers various input and control options.
Bağlantılar:
- XLR Girişi: Profesyonel ses arayüzlerinden veya mikserlerden gelen dengeli ses bağlantıları için.
- TRS Girişi: For balanced or unbalanced 1/4-inch connections.
- RCA Girişi: For unbalanced audio connections from consumer-grade equipment.
- Güç Girişi: Connect the provided power cable to a suitable AC outlet.
Ensure the monitor's power switch is in the 'Off' position before making any connections. Once all audio cables are securely connected, you can switch the monitor 'On'.
İşletim
The FX50 monitors provide several controls on the rear panel to tailor their sound to your listening environment.
Kontroller:
- Ses Düğmesi: Adjusts the overall output level of the monitor. Start with a low setting and gradually increase to a comfortable listening level.
- EQ Dip Switches: These switches allow for acoustic adjustments to compensate for room acoustics or personal preference. Refer to the labels on the rear panel for specific settings.
- HF Shelf (Switches 1-2): Adjusts high-frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
- Mid EQ (Switches 3-4): Adjusts mid-range frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
- Acoustic Space (Switches 5-6): Compensates for bass buildup when monitors are placed near walls or corners. Options typically include 0dB, -1dB, -2dB, -4dB.
- Low Freq Cutoff (Switches 7-8): Applies a high-pass filter to cut off low frequencies, useful when using a subwoofer. Options typically include Flat, 60Hz, 80Hz, 100Hz.
- Güç düğmesi: Monitörü açar veya kapatır.
Bakım
To ensure the longevity and optimal performance of your Fluid Audio FX50 monitors, follow these maintenance guidelines:
- Temizlik: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or waxes. Do not spray liquids directly onto the monitor.
- Atama: Keep monitors away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the units.
- İşleme: Handle with care. Avoid dropping or subjecting the monitors to strong impacts.
- Güç: Disconnect the power cable from the wall outlet if the monitors will not be used for an extended period.
Sorun giderme
If you encounter issues with your FX50 monitors, refer to the following common troubleshooting steps:
- Ses Yok:
- Check all power connections and ensure the monitor is switched on.
- Ses kablolarının hem monitöre hem de ses kaynağına güvenli bir şekilde bağlandığından emin olun.
- Ensure the volume knob on the monitor and your audio source is turned up.
- Arızalı ekipmanı elemek için farklı bir ses kaynağı veya kablo kullanarak test edin.
- Hissing Noise:
- A slight hiss can be normal at high volume settings with no input. Reduce the monitor's volume if the hiss is excessive.
- Ensure you are using balanced cables (XLR or TRS) for longer runs to minimize interference.
- Check for ground loops by ensuring all audio equipment is plugged into the same power strip or outlet.
- Bozuk Ses:
- Lower the input level from your audio source or the monitor's volume.
- Hasarlı kabloları kontrol edin.
- Ensure the EQ dip switches are not set to extreme values that might cause clipping.
Özellikler
| Özellik | Şartname |
|---|---|
| Model Adı | FX50 |
| Hoparlör Tipi | Dual concentric "coaxial" driver |
| Önerilen Kullanımlar | Professional Audio Production and Critical Listening |
| Uyumlu Cihazlar | Dizüstü bilgisayar, MP3 çalar, akıllı telefon, tablet |
| Woofer Çapı | 5 inç |
| Çevresel Ses Kanalı Yapılandırması | 2.0 |
| Renk | Siyah |
| Dahil Bileşenler | XLR, TRS, RCA cables |
| Ürün Ağırlığı | 8.15 Pound |
| Güç Kaynağı | Kablolu Elektrik |
| Kontrol Yöntemi | Remote (referring to EQ dip switches and volume knob) |
| Bağlantı Teknolojisi | XLR, TRS, RCA |
| Ses Çıkışı Modu | Stereo |
| Montaj Tipi | Masa Üstü Montaj |
| Ürün Boyutları | 9.06 x 6.93 x 9.21 inç |
| Hoparlör Maksimum Çıkış Gücü | 90 Watt |
Official Product Video (FX80 Series Overview)
Garanti ve Destek
The Fluid Audio FX50 monitor comes with a Limited Warranty. For detailed information regarding warranty terms, coverage, and how to obtain service, please refer to the warranty card included with your product or visit the official Fluid Audio webalan.
Daha fazla yardım, teknik destek veya view additional product resources, please visit the Fluid Audio Store on Amazon or the official Fluid Audio webalan.
