1. Ürün Bittiview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mekanik Fren: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Yüksek Kapasiteli Motor: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Ergonomik Tasarım: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Güvenlik Talimatları
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Genel Güvenlik
- Her zaman uygun kişisel koruyucu ekipman (KKD) kullanın; bunlar arasında güvenlik gözlükleri, işitme koruyucu, eldiven ve toz maskesi bulunur.
- İş parçasının güvenli bir şekilde temizlendiğinden emin olunampAmeliyattan önce.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Aleti, yanıcı sıvıların, gazların veya tozun bulunduğu yerler gibi patlayıcı ortamlarda çalıştırmayın.
- Elektrikli el aletini kullanırken çocukları ve çevredekileri uzak tutun.
Elektriksel Güvenlik
- Güç kaynağı hacmini sağlayıntage, aletin isim plakasındaki değerle eşleşir.
- Kabloyu kötüye kullanmayın. Kabloyu asla elektrikli aleti taşımak, çekmek veya fişini çekmek için kullanmayın. Kabloyu ısıdan, yağdan, keskin kenarlardan veya hareketli parçalardan uzak tutun.
- Bir elektrikli aleti reklamda çalıştırıyorsanızamp Konum kaçınılmazsa, kaçak akım cihazı (RCD) korumalı bir güç kaynağı kullanın.
Açılı Taşlama Makinesi Güvenliğine Özel
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Bileşenler ve Özellikler
Temel Bileşenler:
- Ana Gövde: Houses the motor, electronics, and gearbox.
- Koruyucu Muhafız: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Mil Kilitleme Düğmesi: Disk değişimini kolaylaştırmak için.
- Tuşu kaydır: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Hava Menfezleri: For motor cooling and dust expulsion.
4. Kurulum
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Mil kilitleme düğmesini basılı tutun.
- İç kapağı yerleştirinampMilin üzerine flanş yerleştirin.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- cl'yi vidalayınamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Mil kilitleme düğmesini bırakın.
5. Kullanım Talimatları
Açma/Kapatma
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Değişken Hız Kontrolü
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Always hold the grinder firmly with both hands.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Bakım
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Temizlik
- Temizlemeden önce daima aletin fişini çekin.
- Toz birikmesini ve bunun sonucunda aşırı ısınmayı önlemek için havalandırma deliklerini düzenli olarak temizleyin. Mümkünse basınçlı hava kullanın.
- Aletin dışını reklamla silinamp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
Karbon fırçalar
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Depolamak
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Araç başlamıyor | Güç kaynağı yok Restart interlock activated (after power failure) Hasarlı güç kablosu | Güç bağlantısını kontrol edin Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Alet çalışma sırasında duruyor | Aşırı yük koruması etkinleştirildi Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Aşırı titreşim | Worn or damaged disc Improperly mounted disc Gevşek sap | Diski değiştir Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Aşınmış karbon fırçalar Dust buildup in vents | Have brushes inspected/replaced by service center Havalandırma deliklerini iyice temizleyin. |
8. Özellikler
| Özellik | Değer |
|---|---|
| Model Numarası | 447668 |
| Güç Girişi | 1700 B |
| Güç Çıkışı | 1050 B |
| Cilttage | 230V |
| Sıklık | 50/60 Hz |
| Maksimum Disk Çapı | 125 mm |
| Yüksüz Hız | 2800-11500 devir/dakika |
| Tool Holder (Angle Grinder) | M14 |
| Kablo Uzunluğu | 4 metre |
| Boyutlar (U x G x Y) | 340x77x105 mm |
| Ağırlık | 2.6 kilo |
| Renk | Red, Black, Silver |
| Malzeme | Metal |
9. Garanti ve Destek
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex websitenizde veya ürün ambalajınızda yer almalıdır.