JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light Instruction Manual

giriiş

This manual provides essential instructions for the safe installation, operation, and maintenance of your JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light. Please read this manual thoroughly before beginning installation and retain it for future reference.

Güvenlik Bilgileri

UYARI: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in injury or death.

• Tüm elektrik bağlantıları, yerel yönetmelik ve yönetmeliklere, Ulusal Elektrik Koduna (NEC) ve ANSI/NFPA 70-1999 standardına uygun olmalıdır.
• Kurulum sürecinden emin değilseniz, kalifiye bir elektrikçiye danışın.
• This fixture must be hardwired. Professional installation is recommended.
• Bu aydınlatma armatürünü topraklanmamış bir elektrik sistemine bağlamayın.
• Tavsiye edilen su miktarını aşmayıntagampuller için e.
• Gücü geri yüklemeden önce tüm bağlantıların güvenli olduğundan emin olun.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• Montaj Plakası
• Gölgelik
• Pendant Shades (3)
• LED Ampuller (3)
• Montaj Donanımı (vidalar, kablo bağlantı somunları)

Şekil 1: Üzeriview of the JONATHAN Y Apollo 3-Light LED Pendant Light components and features.

Kurulum ve Yükleme

Professional installation by a qualified electrician is recommended for this hardwired fixture.

1. Gücü Kapatın: Before starting, ensure the power to the circuit is turned off at the main electrical panel.
2. Montaj Plakasını Hazırlayın: Attach the mounting plate to the junction box in the ceiling using the provided screws.
3. Adjust Pendant Height: Each pendant's cord length is adjustable. Determine the desired hanging height for each light and secure the cord at the canopy.
4. Kablo Bağlantıları: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
5. Kanopiyi Takın: Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it with the provided screws.
6. Ampulleri yükleyin: Screw the included LED bulbs into each pendant socket.
7. Gücü Geri Yükle: Kurulum tamamlandıktan ve tüm bağlantılar güvenli bir şekilde yapıldıktan sonra, ana elektrik panosundan elektriği tekrar açın.

Figure 2: Key features for installation, including adjustable height and easy assembly.

Kullanım Talimatları

• Güç Açma/Kapatma: Operate the light using a standard ON/OFF wall switch.
• Karartma İşlevi: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed and dimmable LED bulbs.
• Ayarlanabilir yükseklik: The height of each pendant can be adjusted during installation to suit your preference and space requirements.

Bakım

• Temizlik: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ampul Değişimi: Ensure power is off before replacing bulbs. Use E26 base LED bulbs, not exceeding 40 watts per bulb.

Sorun giderme

Özellikler

Figure 3: Detailed dimensions of the pendant light fixture.

Garanti ve Destek

Garanti: This product comes with a 30-day manufacturer warranty for defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.

For warranty information or support, please contact the internet customer service center.