Onforu 70W Dusk to Dawn Outdoor Flood Light

1. Giriş

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Onforu 70W Dusk to Dawn Outdoor Flood Light. Please read this manual thoroughly before installation and retain it for future reference.

The Onforu 70W Dusk to Dawn Outdoor Flood Light is a high-luminosity LED security light designed for outdoor use. It features a photocell sensor for automatic dusk-to-dawn operation and adjustable heads for wide area illumination.

2. Güvenlik Bilgileri

UYARI: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. Improper wiring can result in electric shock or fire.

• Ensure the power supply is turned off before beginning any installation or maintenance.
• Bu ürün, ürünün yapısı ve işletimi ile ilgili tehlikeleri bilen bir kişi tarafından geçerli kurulum koduna uygun olarak kurulmalıdır.
• Use only UL-listed wire connectors suitable for the size, type, and number of conductors.
• Yanıcı malzemelerin yakınına kurmayın.
• Dimmer anahtarına bağlamayın.
• The fixture is rated IP65 waterproof, suitable for wet locations. However, ensure all wiring connections are properly sealed and protected from moisture.

3. Paket İçeriği

• 1 x Onforu 70W LED Dusk to Dawn Flood Light
• 1 x Mounting Hardware Kit (screws, wire nuts, mounting bracket)
• 1 x Black Cap for Photocell Sensor (for switch-controlled mode)
• 1 x Kullanım Kılavuzu

4. Özellikler

5. Kurulum

This flood light is designed for hardwired installation. Ensure power is disconnected at the circuit breaker before proceeding.

1. Montaj Yüzeyini Hazırlayın: Attach the mounting bracket to your electrical junction box using the provided screws. Ensure the bracket is securely fastened.
2. Kablo Bağlantıları: Connect the fixture's wires to your household wiring. Match the wires: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire nuts.
3. Fikstürü Takın: Align the fixture with the mounting bracket and secure it with the center screw. Ensure the fixture is flush against the mounting surface.
4. Işık Başlıklarını Ayarlayın: Loosen the screws on the side of each light head to adjust their angle. Tighten the screws once the desired illumination area is achieved. The heads can be adjusted up to 90 degrees vertically and 335 degrees horizontally.

6. Çalışma Modları

The Onforu 70W Flood Light offers two operating modes:

6.1. Dusk to Dawn Mode

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on at night (10-20 Lux) and turn off during the daytime (30-60 Lux), providing hands-free operation and energy savings.

6.2. Switch-Controlled Mode

To operate the light using a standard wall switch, cover the photocell sensor with the provided black cap. This will bypass the dusk-to-dawn function, allowing you to manually turn the light on and off as needed.

7. Bakım

Düzenli bakım, projektörünüzün optimum performans göstermesini ve uzun ömürlü olmasını sağlar.

• Temizlik: Periodically clean the light heads and photocell sensor with a soft, damp cloth to remove dirt, dust, or debris that may obstruct the sensor or reduce light output. Do not use abrasive cleaners or solvents.
• Denetleme: Annually inspect the wiring and mounting for any signs of wear, damage, or loose connections. Ensure the light heads remain securely tightened in their adjusted positions.
• Ampul Değişimi: This LED fixture uses integrated LEDs and does not require bulb replacement.

8. Sorun Giderme

9. Garanti ve Destek

This product is sold without an explicit warranty. For any technical assistance or inquiries, please refer to the contact information provided by your retailer or visit the official Onforu webalan.