Strymon TimeLine Çok Boyutlu Gecikme Pedalı Kullanım Kılavuzu
Modeli: TML
Your guide to unlocking the full potential of your Strymon TimeLine.
1. Giriş
The Strymon TimeLine is a powerful and versatile multidimensional delay pedal designed to provide an extensive range of studio-quality delay effects. Featuring 12 distinct delay algorithms, a comprehensive 30-second stereo looper, and full MIDI implementation, the TimeLine offers unparalleled creative possibilities for guitarists and musicians.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your TimeLine pedal, ensuring you get the most out of its advanced features.
2. Başlarken: Kurulum
2.1. Kutuda Neler Var?
- Strymon TimeLine Multidimensional Delay Pedal
- 9 volt Güç Kaynağı
2.2. Güç Bağlantısı
Connect the included 9-volt DC power supply to the 9VDC input jack on the rear panel of the TimeLine pedal. Ensure the power supply is rated for 9V DC with a center-negative polarity and sufficient current (minimum 300mA recommended).
2.3. Ses Bağlantıları
The TimeLine supports both mono and stereo operation. Use standard 1/4-inch instrument cables for all audio connections.
- Mono Setup: Connect your instrument or preceding pedal to the İçeride bırakıldı jakı bağlayın. DIŞARI KALDI senin için kriko ampyükseltici veya bir sonraki pedal.
- Stereo Kurulumu: Connect your stereo signal source to both İçeride bırakıldı Ve DOĞRUDAN İÇERİ jacks. Connect the DIŞARI KALDI Ve DOĞRU DIŞARI stereo sisteminize giden jaklar amplifier setup or mixer.
- Efekt Döngüsü: The GERİ DÖNMEK Ve GÖNDERMEK jacks can be used for an external effects loop, allowing you to insert other pedals into the TimeLine's signal path.
Figure 2.3.1: Rear panel connections including Left/Right In/Out, Expression, MIDI, and Power.
2.4. MIDI Bağlantıları
The TimeLine features MIDI GİRİŞİ Ve MIDI ÇIKIŞI ports for advanced control and synchronization. Use standard 5-pin DIN MIDI cables to connect to MIDI controllers, interfaces, or other MIDI-enabled devices.
- MIDI GİRİŞİ: Receives MIDI messages for parameter control, preset changes, and tempo synchronization.
- MIDI ÇIKIŞI: Transmits MIDI messages, including MIDI clock and parameter changes.
Figure 2.4.1: MIDI In and Out ports with connected cables.
2.5. Expression Pedal Input
Connect an expression pedal to the DENEYİM jack using a TRS (stereo) cable. This allows real-time control over various parameters, such as delay time, mix, or feedback, for dynamic performance.
Figure 2.5.1: Expression pedal connected to the TimeLine.
3. Operasyon
3.1. Kontroller Üzeriview
The TimeLine features a comprehensive set of knobs and footswitches for intuitive control over its delay parameters and looper functions.
Figure 3.1.1: Front panel controls of the Strymon TimeLine.
- VALUE (push param): Adjusts the currently selected parameter. Push to cycle through parameters.
- ZAMAN: Gecikme süresini kontrol eder.
- TEKRARLAR: Gecikme tekrarlarının (geri bildirim) sayısını ayarlar.
- KARIŞIM: Controls the blend between dry and wet signals.
- FİLTRE: Adjusts the tone of the delay repeats.
- KUMTAŞI: Adds character and saturation to the delay repeats.
- SPEED / MOD / DEPTH: Controls modulation parameters depending on the delay type.
- TİP Düğme: Selects one of the 12 delay algorithms.
- REC/DUB Footswitch (A): Records or overdubs loops.
- PLAY Footswitch (B): Plays or stops loops.
- TAP Ayak Pedalı: Taps in tempo or stops looper (hold).
3.2. Delay Algorithms
The TimeLine offers 12 unique delay machines, each with its own distinct character and adjustable parameters:
- Dijital: Crystal-clear digital delay.
- Çift: Two independent delay lines, configurable in series or parallel.
- Model: Multi-tap patterns for rhythmic delays.
- Tersi: Delays played backward.
- Buz: Slices and dices input with selectable interval shift.
- Ördek: Delay level ducks when playing, swells when silent.
- dBucket: Analog bucket-brigade style delay recreation.
- dTape: Emulates classic tape echo machines.
- Düşük Kaliteli: Adds bit depth and sample rate reduction for vintage geliyor.
- Kabarma: Variable swell time with the delay.
- Titreme: Synchronized tremolo with waveshape, depth, and speed.
- Filtre: Synchronized filter placed before or after the delay.
Şekil 3.2.1: Üzeriview of the 12 unique delay algorithms.
3.3. Döngü Fonksiyonu
The TimeLine includes a powerful 30-second stereo looper. It can be routed pre- or post-delay, allowing for creative layering and sound design.
- Kayıt: Basmak REC/DUB (A) Kaydı başlatmak için.
- Aşırı dublaj: Oynarken, basın REC/DUB (A) again to overdub.
- Playback: Basmak PLAY (B) Oynatmayı başlatmak veya durdurmak için
- Durdur: Tutmak MUSLUK footswitch to stop the looper.
- Geri al/Yinele: Advanced looper functions are accessible via MultiSwitch or MIDI.
Figure 3.3.1: Built-in looper capabilities.
3.4. Ön Ayarları Kaydetme ve Geri Çağırma
The TimeLine allows you to save and recall your custom delay settings. The pedal has 200 preset locations, organized into 100 banks (A and B per bank).
- Kaydediliyor: To save a preset, hold the TİP knob until the display indicates "SAVE". Use the DEĞER knob to select a preset location, then press DEĞER onaylamak için.
- Recalling: Kullanın BANKA AŞAĞI Ve BANK UP footswitches (A and B when not in looper mode) to navigate through banks. Press the corresponding footswitch (A or B) to load the desired preset.
4. Bakım
Proper maintenance ensures the longevity and optimal performance of your Strymon TimeLine pedal.
- Temizlik: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Depolamak: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, disconnect the power supply.
- Donanım Yazılımı Güncellemeleri: Periodically check the official Strymon website for any available firmware updates. Updates can introduce new features, improvements, or bug fixes. Follow the instructions provided by Strymon for any update procedures.
5. Sorun Giderme
If you encounter issues with your TimeLine pedal, refer to the following common troubleshooting steps:
| Sorun | Olası Neden / Çözüm |
|---|---|
| No power / Pedal not turning on |
|
| No sound / Dry signal only |
|
| Unexpected behavior / Glitches |
|
| Looper kayıt yapmıyor/çalamıyor. |
|
For more detailed troubleshooting or issues not covered here, please visit the official Strymon support websitesine gidin veya müşteri hizmetleriyle iletişime geçin.
6. Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | TML |
| Ürün Ağırlığı | 2.03 pound (921 Gram) |
| Ürün Boyutları | 10.24 x 5.91 x 3.54 inç |
| Güç Kaynağı | Kablolu Elektrik |
| Cilttage | 9 Volts DC (center-negative) |
| Bağlayıcı Türü | 1/4-inch audio jack, 5-pin DIN MIDI |
| Donanım Arayüzü | 1/4-inch Audio, MIDI |
| Sinyal Biçimi | Analog (input/output), Digital (internal processing) |
| Delay Types | 12 (Digital, Dual, Pattern, Reverse, Ice, Duck, dBucket, dTape, Lo-Fi, Swell, Trem, Filter) |
| Looper Length | 30 seconds (stereo) |
| Ön Ayarlar | 200 (100 banks x 2 presets) |
7. Garanti ve Destek
Strymon products are built with high-quality components and undergo rigorous testing. For information regarding the warranty period and terms for your TimeLine pedal, please refer to the warranty card included with your product or visit the official Strymon webalan.
For technical support, product registration, or to access additional resources such as FAQs and firmware downloads, please visit the official Strymon support page or their Amazon Brand Store:
