1. Güvenlik Bilgileri
Please read all safety warnings and instructions carefully before installing or servicing this electronic timer. Failure to follow these instructions may result in fire, electric shock, serious injury, or death.
UYARI: Yangın veya Elektrik Çarpması Riski
- Kurulum veya bakım yapmadan önce devre kesici(ler)den veya bağlantı kesici(ler)inden gücü kesin.
- Servisten önce ekipmanın enerjisini kesmek için birden fazla devre kesici veya bağlantı kesme anahtarı gerekebilir.
- Kurulum ve/veya kablolama ulusal ve yerel elektrik kodu gerekliliklerine uygun olmalıdır.
- YALNIZCA BAKIR iletkenler kullanın.
- Do NOT remove the plastic insulator covering the terminals.
Note: This device includes multilingual safety warnings (English, French, Spanish) directly on the unit for user reference.
Kablolama talimatları: To wire, lift the terminal, remove the screw, and swing it aside. Replace the screw and the plastic insulator covering the terminal before powering on the unit.
2. Ürün Bittiview
The Intermatic ET2745C is a versatile electronic timer designed for precise control of electrical loads. It offers an easy-to-use interface while providing advanced scheduling capabilities for a wide range of applications.
Temel Özellikler:
- Çalışma Modu: 7/365 Days (daily, weekly, or annual scheduling).
- Kanal Sayısı: 4 independent channels for controlling multiple loads.
- Planlama: Up to 96 set points or events for detailed programming.
- Holiday Blocks: Up to 50 holiday blocks with independent scheduling capabilities.
- Güç Yedekleme: 100-hour supercapacitor eliminates the need for batteries, maintaining programming during power outagee.
- CilttagSeçim: Otomatik giriş hacmitage selection from 120 to 277 VAC, 60 Hz.
- Geçersiz Kılma İşlevi: Additional mode of operation turns the ON/OFF buttons into 2-hour overrides.
Şekil 1: Front panel of the Intermatic ET2745C Electronic Timer, showing the display, control buttons (MODE, DAY, ENTER/NEXT, ON/OFF, CLEAR MEM, CLEAR ENTRY), and safety warnings.
3. Kurulum
Installation should only be performed by a qualified electrician in accordance with all national and local electrical codes.
Kurulum Adımları:
- Güç Bağlantısının Kesilmesi: Before beginning any installation, ensure that power to the circuit is completely disconnected at the main circuit breaker or disconnect switch. Verify with a voltage test cihazı.
- Montaj: Mount the timer securely in the desired location, ensuring it is protected from moisture and extreme temperatures.
- Kablolama: Connect the power supply and load wires to the appropriate terminals on the timer. Refer to the wiring diagram provided with the unit for specific connections. Ensure all connections are tight and secure. Use copper conductors only.
- Yalıtkan: Do not remove the plastic insulator covering the terminals.
- Güç Restorasyonu: Kablolama işlemi tamamlanıp doğrulandıktan sonra devreye tekrar güç verin.
4. Kurulum ve Programlama
The ET2745C timer features an intuitive interface for setting the time, date, and programming events.
İlk kurulum:
- Güç Açık: After installation and power restoration, the display will illuminate.
- Geçerli Saati ve Günü Ayarlayın:
- Basın MOD Zaman ayarlama moduna girmek için düğmesine basın.
- Kullanın CLEAR ENTRY (+/-) Saati ve dakikayı ayarlamak için düğmeler.
- Basın GÜN button to select the current day of the week.
- Basmak GİRİŞ/İLERİ to confirm and move to the next setting, or MOD çıkmak.
Programlama Etkinlikleri:
- Program Moduna Girin: Basın MOD button repeatedly until 'PROG' or 'EVENT' appears on the display.
- Kanal Seçin: Kullanın AÇIK/KAPALI buttons (one for each channel) to select the channel you wish to program.
- Açma/Kapama Zamanlarını Ayarlayın:
- Basmak GİRİŞ/İLERİ to cycle through ON and OFF events for the selected channel.
- Kullanın CLEAR ENTRY (+/-) buttons to set the desired time for each event.
- Kullanın GÜN button to select the days of the week for the event to be active (e.g., Mon-Fri, Sat-Sun, or individual days).
- Kaydet ve çık: Basmak GİRİŞ/İLERİ to save each event. Once all events are programmed, press MOD programlama modundan çıkmak için
Holiday Blocks:
The timer allows for programming up to 50 holiday blocks. Refer to the detailed programming guide in the full manual for specific instructions on setting holiday schedules.
Hafızayı temizle:
To clear all programmed events, press the CLEAR MEM button. Confirm the action if prompted by the display.
5. Kullanım Talimatları
Once programmed, the ET2745C timer will operate automatically according to your set schedule.
Manuel Geçersiz Kılma:
Each of the four AÇIK/KAPALI buttons can be used for a temporary 2-hour manual override. Pressing an AÇIK/KAPALI button will toggle the corresponding channel's state (ON to OFF, or OFF to ON) for a 2-hour duration, after which it will revert to the programmed schedule.
Görüntü Bilgisi:
The display shows the current time, day, and the status of each channel. Indicators on the display will show which channels are currently active.
6. Bakım
The Intermatic ET2745C timer is designed for reliable, long-term operation with minimal maintenance.
- Temizlik: Periodically wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Denetleme: Annually inspect the wiring connections for tightness and signs of wear or damage. Ensure the unit is free from dust and debris.
- Süper kapasitör: The internal supercapacitor provides backup power for programming. It does not require user maintenance or replacement.
7. Sorun Giderme
If you encounter issues with your ET2745C timer, refer to the following common troubleshooting steps:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Zamanlayıcı ekranı boş. | Üniteye güç gelmiyor. | Devre kesiciyi ve kablo bağlantılarını kontrol edin. Elektriğin geri geldiğinden emin olun. |
| Load does not turn ON/OFF as programmed. | Incorrect programming; manual override active; faulty wiring. | Review programming steps. Check if a manual override is active. Verify wiring connections. |
| Saat veya tarih yanlış. | Time not set correctly after power loss (though supercapacitor should prevent this for 100 hours). | Reset the current time and day as per Section 4. |
| Timer makes clicking noises. | Normal operation of internal relays. | This is typically normal during switching operations. If excessive or continuous, contact support. |
If troubleshooting steps do not resolve the issue, contact Intermatic customer support.
8. Özellikler
| Şartname | Değer |
|---|---|
| Model Numarası | ET2745C |
| Marka | Intermatik |
| Cilttage | 120 to 277 VAC, 60 Hz (Automatic Selection) |
| Ampöfke | 30 Amps |
| Çalışma Modu | 7/365 Gün |
| Kanal Sayısı | 4 |
| Set Points/Events | 96'e kadar |
| Holiday Blocks | 50'e kadar |
| Güç Yedekleme | 100 saatlik Süperkapasitör |
| Malzeme | Metal |
| Ürün Boyutları | 7 x 7 x 7 inç |
| Ürün Ağırlığı | 2.7 Pound |
| UPC | 078275148178 |
9. Garanti ve Destek
Intermatic products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Intermatic webalan.
Müşteri Desteği:
If you have any questions regarding the installation, operation, or troubleshooting of your Intermatic ET2745C Electronic Timer, please contact Intermatic customer support:
- Webalan: www.intermatic.com
- Telefon: Refer to the Intermatic webGüncel iletişim numaraları için siteyi ziyaret edin.
