Hunter 46-inch Contemporary Matte Black Indoor Ceiling Fan with Light Kit

Güvenlik Bilgileri

Read and understand all instructions before beginning installation. Failure to follow these instructions could result in electric shock, fire, or serious personal injury.

• Ensure the installation site is structurally sound and can support the fan's weight (approximately 21 lbs).
• Tüm kablolama ulusal ve yerel elektrik kodlarına uygun olmalıdır. Kablolama konusunda bilginiz yoksa, kalifiye bir elektrikçiye danışın.
• Kurulum veya herhangi bir bakım işlemine başlamadan önce, devre kesiciden veya sigorta kutusundan elektriği kesin.
• Hasarlı kanatlara veya gövdeye sahip fanı çalıştırmayın.
• Zeminden fan kanatlarının alt kenarına kadar en az 7 fit (yaklaşık 2,1 metre) mesafe bırakın.
• Bu fan yalnızca iç mekanda kullanım için tasarlanmıştır.

Kurulum ve Yükleme

This section guides you through the assembly and installation process of your Hunter ceiling fan.

1. Ambalajın Açılması ve Muayene

Carefully remove all components from the packaging. Inspect all parts for any damage. Do not discard packaging materials until assembly is complete and the fan is operating correctly.

2. Fanın Montajı

The fan uses a standard profile mounting with included 3-inch and 2-inch downrods. Choose the appropriate downrod length for your ceiling height. Ensure the electrical box is securely mounted and capable of supporting the fan.

Image: Hunter 46-inch ceiling fan installed in a living space, demonstrating typical mounting.

1. Montaj braketini tavandaki elektrik kutusuna sabitleyin.
2. Feed electrical wires through the downrod and canopy.
3. Bağlantı çubuğunu motor gövdesine takın.
4. Fan tertibatını kaldırın ve montaj braketine asın.

3. Elektrik Bağlantıları

Ensure power is OFF at the circuit breaker before making any electrical connections. Connect the fan's wires to the household wiring according to the wiring diagram provided in the full installation guide (not included here). This fan operates on 120 Volts AC.

4. Fan Kanatlarının Takılması

The fan includes 5 reversible Medium Density Fiberboard (MDF) blades with Warm Grey Oak and Greyed Walnut finishes. Choose your preferred finish before attaching the blades.

Resim: Yakın çekim view of the fan's motor housing with the Hunter logo and a blade arm attached, showing the connection point.

1. Attach each blade to a blade arm using the provided screws.
2. Bıçak kollarını motor gövdesine sabitleyin.

Image: Left shows the Warm Grey Oak side of a fan blade. Right shows the Greyed Walnut side of a fan blade, demonstrating the reversible design.

5. Işık Kitinin Kurulumu

The fan includes an integrated light kit with premium painted cased white glass shading and two 9-watt energy-efficient, dimmable LED bulbs (E26/A19 base).

Image: Close-up of the fan's light kit, showing the frosted white glass shade and the two pull chains for fan speed and light control.

1. Connect the light kit wires to the fan motor wires.
2. Secure the light kit assembly to the fan motor housing.
3. LED ampulleri duylara takın.
4. Attach the glass shade to the light kit.

Kullanım Talimatları

Your Hunter ceiling fan is controlled by pull chains for both fan speed and light operation.

Fan Hız Kontrolü

Resim: Ayrıntılı view of the fan's light kit, highlighting the two pull chains. One chain controls the fan speed, and the other controls the light.

• Locate the pull chain designated for fan speed (often marked with a fan icon or a shorter chain).
• Pull the chain once for High speed.
• Pull the chain a second time for Medium speed.
• Pull the chain a third time for Low speed.
• Pull the chain a fourth time to turn the fan OFF.

Işık Kontrolü

• Locate the pull chain designated for light control (often marked with a light bulb icon or a longer chain).
• Pull the chain once to turn the light ON.
• Pull the chain a second time to turn the light OFF.
• To dim the light, pull and hold the light chain. Release when the desired brightness is reached.

Reversible Blade Operation (Seasonal Use)

Your fan features reversible blades and a reversible motor for year-round comfort. A switch on the fan motor housing allows you to change the direction of blade rotation.

• Summer Operation: Set the switch to make the blades rotate counter-clockwise. This creates a downward airflow, producing a cooling effect.
• Kış Operasyonu: Set the switch to make the blades rotate clockwise. This creates an upward airflow, recirculating warm air from the ceiling without creating a direct draft.
• Always turn off the fan and wait for the blades to stop completely before changing the direction switch.

Bakım

Düzenli bakım, tavan vantilatörünüzün uzun ömürlü olmasını ve en iyi performansı göstermesini sağlar.

• Temizlik: Fan kanatlarını ve motor gövdesini yumuşak bir bezle düzenli olarak temizleyin.amp Bez kullanın. Aşındırıcı temizleyiciler veya çözücüler kullanmayın, çünkü bunlar yüzeye zarar verebilir.
• Sıkma Vidaları: Check all screws on the fan blades, blade arms, and mounting hardware at least twice a year. Tighten any loose screws to prevent wobbling and noise.
• Ampul Değişimi: If a light bulb needs replacement, ensure the power is off. Use only 9-watt LED bulbs with an E26/A19 base, or equivalent.
• Yağlama Gerektirmez: Fan motoru sürekli olarak yağlanmıştır ve yağlama gerektirmez.

Sorun giderme

If you experience issues with your fan, refer to the following common problems and solutions before contacting support.

Fan Başlamıyor

• Gücü Kontrol Edin: Ensure the circuit breaker is ON and the wall switch (if applicable) is ON.
• Kablo Bağlantıları: Verify all electrical connections are secure and correctly wired according to the installation instructions.
• Pull Chain: Ensure the fan pull chain has been pulled to an ON position.

Fan Titreme

• Bıçak Vidaları: Check that all blade screws are tightened securely.
• Blade Arms: Ensure blade arms are securely attached to the motor.
• Montaj: Verify the mounting bracket and downrod are securely fastened to the ceiling and electrical box.
• Bıçak Dengesi: Uneven blade weight can cause wobbling. Use a balancing kit (often sold separately) if necessary.

Işık Çalışmıyor

• Ampul Montajı: Ampullerin sıkıca vidalandığından emin olun.
• Ampulün İşlevselliği: Test bulbs in a known working fixture or replace with new ones.
• Kablolama: Check light kit wiring connections.
• Pull Chain: Ensure the light pull chain is in the ON position.

Gürültülü Çalışma

• Gevşek Vidalar: Vantilatör üzerindeki tüm vidaları sıkın.
• Montaj: Ensure the fan is securely mounted and not touching any part of the ceiling.
• Cam Gölge: Check if the glass shade is securely fastened and not rattling.
• Bıçak Boşluğu: Ensure blades are not hitting anything.

Özellikler

Image: Energy Guide label showing estimated yearly energy cost ($10) and airflow (3,133 Cubic Feet Per Minute) for the fan.

Garanti ve Destek

For specific warranty information regarding your Hunter ceiling fan, please refer to the documentation included with your purchase or visit the official Hunter Fan Company webalan.

If you require technical assistance or have questions not covered in this manual, please contact Hunter Customer Support:

• Hunter Fan Company Official Webalan: www.hunterfan.com
• Müşteri Hizmetleri: Şuna bakın: webGüncel iletişim yöntemleri (telefon, e-posta, sohbet) için site.

Please have your model number (CC5C95C84) and date of purchase available when contacting support.