giriiş
This manual provides essential information for the safe and effective operation, installation, and maintenance of your Richmat HJA1S Actuator Motor. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Richmat HJA1S Actuator Motor, showing the main unit, wired remote control, and power cord.
Güvenlik Bilgileri
- Herhangi bir bakım veya kurulum işlemi yapmadan önce daima gücü kesin.
- Ensure all connections are secure and correctly wired to prevent electrical hazards.
- Do not attempt to open or repair the motor unit. Refer to qualified service personnel for repairs. The product label explicitly states: "NOT TO BE OPENED BY UNAUTHORIZED PERSON".
- Çalışma sırasında ellerinizi ve bol giysilerinizi hareketli parçalardan uzak tutun.
- This motor is designed for adjustable bed frames and hospital beds. Do not use for unintended applications.
Figure 2: Product label displaying model number, input voltage, stroke, max load, duty cycle, and safety warnings.
Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- 1 x Richmat HJA1S Actuator Motor
- 1 x Kablolu Uzaktan Kumanda
- 1 x Güç Kablosu
Kurulum ve Yükleme
This actuator motor is designed for easy replacement in compatible adjustable bed frames. Ensure the bed frame is unplugged from the power outlet before beginning installation.
- Uyumluluk Kontrolü: Before installation, verify that the center distance between the two mounting bars on your old motor is approximately 581 mm (±2mm). This motor is a replacement for OKIMAT 2, DEWERT OKIN LIMOSSI, and similar dual actuator motors.
- Eski Motoru Çıkarın: Carefully disconnect the old motor from the bed frame and unplug any electrical connections.
- Yeni Motorun Konumu: Align the new Richmat HJA1S motor with the mounting points on your bed frame.
- Güvenli Motor: Secure the motor to the bed frame using appropriate fasteners (not included, typically reused from the old motor or provided with the bed frame). Ensure it is firmly attached and stable.
- Uzaktan Kumandayı Bağlayın: Plug the wired remote control into the designated port on the actuator motor.
- Gücü bağlayın: Plug the power cord into the motor, then plug the other end into a standard 110V power outlet.
Figure 3: Dimensional drawing indicating the 581mm center distance between mounting points, crucial for compatibility.
Figure 4: The wired remote control used to operate the bed's adjustable functions.
Figure 5: The standard 2-prong power plug for connecting the motor to an electrical outlet.
Kullanım Talimatları
The Richmat HJA1S actuator motor provides functional back and foot rise and fall adjustments for your bed frame. It does not control the overall height of the bed or provide massage functions.
- Uzaktan kumanda: Use the wired remote control to adjust the bed's positions. The remote typically has buttons for:
- Head Up / Head Down
- Foot Up / Foot Down
- İşlem: Press and hold the desired button on the remote control to move the corresponding section of the bed. Release the button to stop movement.
- Görev Döngüsü: The motor has a duty cycle of 10% max, meaning it can operate for 2 minutes continuously, followed by 18 minutes of rest. This prevents overheating and prolongs motor life. Avoid continuous operation beyond the recommended duty cycle.
Bakım
The Richmat HJA1S actuator motor requires minimal maintenance. Following these guidelines will help ensure its longevity:
- Temizlik: Wipe the exterior of the motor and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the motor housing or remote.
- Kablo Denetimi: Periodically inspect the power cord and remote control cable for any signs of damage, fraying, or kinks. Replace if damage is found.
- Montaj Kontrolü: Occasionally check that the motor remains securely mounted to the bed frame. Tighten any loose fasteners.
- Aşırı Yüklemeden Kaçının: Do not exceed the maximum load capacity of the motor (6500N x 2).
Sorun giderme
If you encounter issues with your actuator motor, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Motor uzaktan kumandaya yanıt vermiyor. | No power, loose connection, faulty remote. |
|
| Motor aralıklı olarak çalışıyor. | Overheating (duty cycle exceeded), loose wiring. |
|
| Çalışma sırasında olağandışı gürültü. | Obstruction, worn parts, improper installation. |
|
If the problem persists after attempting these solutions, please contact Richmat customer support.
Özellikler
| Özellik | Detay |
|---|---|
| Model Adı | HJA1S |
| Ürün Model Numarası | hja1 |
| Marka | zengin |
| Giriş Voltage | AC 100V-240V~50/60Hz |
| Maksimum Yük | 2 x 6500N |
| Stroke (Head) | 87mm |
| Stroke (Foot) | 69mm |
| Görev Döngüsü | 10% max, 2mins/18mins |
| Ürün Ağırlığı | 5 Kilogram (11.02 Pound) |
| Beygir gücü | 50 Watt |
| Paket Boyutları | 29.37 x 7.87 x 6.42 inç |
Garanti Bilgileri
The Richmat HJA1S Actuator Motor comes with a bir yıllık garanti against non-human damage. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized modification, or failure to follow the instructions in this manual.
Garanti talepleri için lütfen satın alma belgenizi saklayın.
Müşteri Desteği
For technical assistance, warranty claims, or general inquiries, please contact Richmat customer support through the retailer where the product was purchased or refer to the manufacturer's official webiletişim bilgileri için site.
Daha fazla bilgi için şu adresi ziyaret edebilirsiniz: Amazon'daki ürün sayfası.
