Strymon Volante Manyetik Yankı Makinesi Kullanım Kılavuzu

1. Giriş

The Strymon Volante is a magnetic echo machine designed to deliver a wide range of vintage delay effects. It features three distinct echo engines: Drum echo, Tape echo, and Reel-to-Reel studio echo, along with a Sound on Sound looper mode and an onboard spring reverb. This pedal is suitable for electric and acoustic guitars, synthesizers, vocals, and keyboards, offering extensive control over delay parameters and sonic characteristics.

2. Güvenlik Bilgileri

• Güç Kaynağı: Use only the specified 9V DC power supply with the correct polarity. Using an incorrect power supply can damage the unit and void the warranty.
• Su ve Nem: Do not expose the unit to water or excessive moisture. This can cause electric shock or fire.
• Havalandırma: Ünitenin çevresinde yeterli havalandırma olduğundan emin olun. Havalandırma açıklıklarını kapatmayın.
• Temizlik: Cihazı yumuşak, kuru bir bezle temizleyin. Sıvı temizleyiciler veya aerosoller kullanmayın.
• Servis: Cihazın bakımını kendiniz yapmaya çalışmayın. Tüm bakım işlemlerini yetkili servis personeline yaptırın.

3. Paket İçeriği

Upon opening the box, verify that the following items are included:

• Strymon Volante Magnetic Echo Machine pedal
• 9V DC Power Supply (specific to region)
• USB kablosu
• Hızlı Başlangıç ​​Kılavuzu (bu kılavuz ayrıntılı talimatlar içermektedir)

4. Ürün Bittiview ve Kontroller

The Volante pedal features a comprehensive set of controls for shaping your echo sounds. Familiarize yourself with the layout below.

Şekil 4.1: Tepe view of the Strymon Volante pedal, showing all knobs, switches, and footswitches.

Üst Panel Kontrolleri:

• EĞLENCE SEVİYESİ: Adjusts the input gain for the echo signal. Higher settings introduce more saturation.
• DÜŞÜK KESİM: Filters out low frequencies from the echo repeats.
• MECHANICS: Controls the mechanical integrity of the virtual echo machine, affecting wow, flutter, and other imperfections.
• GİYMEK: Simulates the degradation of the magnetic medium, adding warmth and character to the repeats.
• TİP Anahtar: Selects between Drum, Tape, and Studio echo engines.
• HIZ Anahtarı: Adjusts the playback speed of the echo, affecting delay time (Half, Normal, Double).
• TEKRARLAR: Controls the number of echo repeats.
• YANKI SEVİYESİ: Adjusts the overall volume of the echo repeats.
• YAY: Controls the level of the onboard spring reverb.
• TIME Playback/Feedback LEDs (1-4): Indicate active playback and feedback heads.
• SPACING Switch: Adjusts the spacing between the virtual playback heads (Even, Triplet, Golden, Silver).

Ayak pedalları:

• ON (Left Footswitch): Toggles the effect on/off. Hold for Reverse.
• FAVORITE (Middle Footswitch): Recalls a saved preset. Hold for Pause (in Sound on Sound mode).
• TAP (Right Footswitch): Taps in the delay tempo. Hold for Splice (in Sound on Sound mode).

Şekil 4.2: Rear panel connections of the Strymon Volante, including audio inputs/outputs, expression pedal, USB, MIDI, and power input.

Arka Panel Bağlantıları:

• INST/LINE Switch: Selects input level for instrument or line level signals.
• LEFT IN / RIGHT IN: Mono or stereo audio inputs.
• LEFT OUT / RIGHT OUT: Stereo audio outputs.
• TECRÜBE: Expression pedal input for real-time control of parameters.
• USB BAĞLANTI: USB connection for firmware updates and MIDI control.
• MIDI IN / MIDI OUT: Standard MIDI connections for advanced control and synchronization.
• 9VDC: Birlikte verilen 9V DC güç kaynağı için güç girişi.

5. Kurulum

5.1 Güç Bağlantısı

1. Ensure the Volante is switched off (if applicable) and all audio connections are made before connecting power.
2. Connect the included 9V DC power supply to the 9VDC Arka paneldeki giriş.
3. Güç kaynağını uygun bir duvar prizine takın.

5.2 Ses Bağlantıları

The Volante supports both mono and stereo operation.

• Mono Setup: Enstrümanınızı şuraya bağlayın: İçeride bırakıldı jakı bağlayın. DIŞARI KALDI senin için kriko ampyükseltici veya bir sonraki pedal.
• Stereo Kurulumu: Connect your stereo source (e.g., another stereo pedal, synth) to the İçeride bırakıldı Ve DOĞRUDAN İÇERİ jacks. Connect the DIŞARI KALDI Ve DOĞRU DIŞARI stereo sisteminize giden jaklar ampAmplifikatör kurulumu veya ses arayüzü.
• Giriş Seviyesi: Kullanın INST/HAT switch to match your input signal level. Set to ENSTİTÜ for guitar/bass, and ASTAR for synthesizers or effects loops.

5.3 MIDI and USB Connections (Optional)

• MİDİ: Connect MIDI cables from your MIDI controller or interface to the MIDI GİRİŞİ Ve MIDI ÇIKIŞI jacks for advanced control, preset changes, and synchronization.
• USB BAĞLANTI: Connect a USB cable from the Volante to your computer for firmware updates and MIDI over USB functionality.

6. Kullanım Talimatları

6.1 Temel İşlemler

1. Engage the Effect: Basın ON footswitch to activate the delay effect. The LED above the footswitch will illuminate.
2. Select Echo Type: Kullanın TİP switch to choose between Drum, Tape, or Studio echo.
3. Adjust Delay Time: The delay time is primarily controlled by the MUSLUK footswitch. Tap it two or more times to set the tempo. The HIZ switch (Half, Normal, Double) further divides or multiplies the tapped tempo.
4. Control Repeats: Çevir TEKRARLAR knob to increase or decrease the number of echo repetitions.
5. Set Echo Level: Kullanın EKO SEVİYESİ knob to blend the wet (effected) signal with your dry signal.
6. Add Spring Reverb: Ayarla BAHAR knob to introduce the onboard spring reverb.

6.2 Shaping the Echo Tone

• EĞLENCE SEVİYESİ: For clean echoes, keep this knob lower. Increase it to introduce natural saturation and soft clipping characteristic of magnetic media.
• DÜŞÜK KESİM: Use this to remove muddy low frequencies from your repeats, making them clearer and less intrusive.
• MECHANICS & WEAR: These knobs allow you to dial in the imperfections and character of vintage echo machines. Experiment with them to achieve desired vintage textures.
• ARALIK: The ARALIK switch alters the rhythmic relationship between the four virtual playback heads.
  • Eşit: Heads are equally spaced.
  • Triplet: Creates triplet-based rhythms.
  • Golden: Asymmetrical spacing for unique rhythmic patterns.
  • Gümüş: Another asymmetrical spacing option.

6.3 Sound on Sound Looper Mode

The Volante features a mono Sound on Sound looper mode, inspired by classic tape looping techniques.

1. Engage Looper: Tutun MUSLUK footswitch for approximately 1 second until the LED above it flashes. This enters Sound on Sound mode.
2. Kayıt: The looper automatically starts recording when engaged. Play your phrase.
3. fazla kayıt: After the initial loop is recorded, the looper automatically enters overdub mode. Play additional layers.
4. Durdur/Temizle: Basın ON footswitch to stop playback. Hold the ON footswitch to clear the loop.
5. Duraklama: In Sound on Sound mode, hold the FAVORİ footswitch to pause the loop.
6. Ekleme: In Sound on Sound mode, hold the MUSLUK footswitch to splice the loop, creating a new loop point.
7. Tersi: While the loop is playing, hold the ON footswitch to reverse the loop playback.

6.4 Ön Ayarlar

The Volante allows you to save and recall your favorite settings.

• Bir Ön Ayarı Kaydetme: Once you have dialed in your desired sound, press and hold the FAVORİ footswitch until its LED flashes, then release. Your current settings are now saved to the Favorite preset.
• Bir Ön Ayarı Geri Çağırma: Basın FAVORİ footswitch to instantly recall your saved preset.
• Not: The Volante supports up to 300 presets via MIDI, but only one "Favorite" preset is directly accessible via the footswitch.

7. Gelişmiş Özellikler

7.1 Expression Pedal Control

Connect a standard expression pedal to the DENEYİM jack to control various parameters in real-time. The specific parameter controlled can be configured via secondary functions or MIDI.

7.2 MIDI Implementation

The Volante offers extensive MIDI control for integration into complex setups.

• MIDI Control Change (CC): Most knobs and switches can be controlled via MIDI CC messages.
• Program Değişikliği (PC): Access up to 300 presets using MIDI Program Change messages.
• MIDI Clock Sync: Synchronize the delay tempo with external MIDI clock sources.
• Refer to the full MIDI Implementation Chart available on the Strymon webDetaylı bilgi için sitemizi ziyaret edebilirsiniz.

8. Bakım

• Temizlik: Wipe the pedal with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
• Depolamak: Kullanılmadığı zamanlarda pedalı serin, kuru ve doğrudan güneş ışığından ve aşırı sıcaklıklardan uzak bir yerde saklayın.
• Donanım Yazılımı Güncellemeleri: Periodically check the Strymon website for firmware updates. Updates can introduce new features or improve performance. Use the USB connection and the Strymon Updater software to perform updates.

9. Sorun Giderme

10. Özellikler

11. Garanti ve Destek

11.1 Garanti Bilgileri

Strymon products are designed and built to high standards. For detailed warranty information, including coverage period and terms, please refer to the official Strymon webSiteyi ziyaret edin veya müşteri destekleriyle iletişime geçin. Garanti talepleri için satın alma belgenizi saklayın.

11.2 Müşteri Desteği

If you encounter any issues not covered in this manual or require further assistance, please visit the official Strymon support page or contact their customer service team. You can typically find contact information and FAQs on the Strymon webalan.

Strymon Webalan: www.strymon.net