Kılavuzlar+

KOMSHINE GX36/GX37 Compatible Accessory

KOMSHINE GX36/GX37 Füzyon Kaynak Makineleri için Fiber Optik SOC Ek Bağlantı Konnektörü ve Fiber Tutucu Kullanım Kılavuzu

Model: GX36/GX37 Compatible Accessories

1. Giriş

This manual provides detailed instructions for the proper use, setup, and maintenance of the KOMSHINE Fiber Optic SOC (Splice-on Connector) and Fiber Holder. These accessories are specifically designed for compatibility with KOMSHINE GX36 and GX37 series optical fiber fusion splicers, facilitating efficient and reliable fiber optic splicing operations, particularly for SC type connectors.

Understanding the contents of this manual will ensure optimal performance and longevity of your KOMSHINE accessories.

2. Paket İçeriği

Verify that all items are present and undamaged upon unpacking. If any items are missing or damaged, contact your supplier immediately.

  • One (1) Pair of KOMSHINE Fiber Optic SOC Splice-on Connectors / Fiber Holders (SC Type)
Two KOMSHINE Fiber Optic SOC Splice-on Connectors / Fiber Holders

Figure 1: A pair of KOMSHINE Fiber Optic SOC Splice-on Connectors / Fiber Holders, designed for secure fiber placement during fusion splicing.

3. Ürün Bittiview

The KOMSHINE Fiber Optic SOC Splice-on Connector and Fiber Holder are precision-engineered components designed to securely hold optical fibers and SC type splice-on connectors during the fusion splicing process. They ensure accurate alignment and stability, which are critical for achieving low-loss splices.

Temel Özellikler:

  • Uyumluluk: Specifically designed for KOMSHINE GX36 and GX37 fusion splicers.
  • Secure Holding: Provides stable clamping for optical fibers and SC type splice-on connectors.
  • Precision Alignment: Aids in accurate fiber alignment for optimal splicing results.
  • Dayanıklı Yapı: Manufactured for reliability and long-term use in demanding environments.
Taraf view of a KOMSHINE Fiber Optic SOC Splice-on Connector / Fiber Holder

Şekil 2: Yan view illustrating the design of the fiber holder, showing the clamping mechanism for securing the fiber or connector.

4. Kurulum

Before using the fiber holders, ensure your KOMSHINE GX36 or GX37 fusion splicer is powered off and disconnected from any power source. Handle the fiber holders with care to avoid damage to the precision surfaces.

  1. Inspect the Holders: Visually inspect both fiber holders for any signs of damage, dust, or debris. Clean if necessary using a lint-free cloth and isopropyl alcohol.
  2. Identify Splicer Slots: Locate the designated fiber holder slots on your KOMSHINE GX36 or GX37 fusion splicer. These are typically on either side of the splicing area.
  3. Insert Holders: Gently slide each fiber holder into its respective slot on the fusion splicer. Ensure they are seated firmly and correctly. The holders are designed for a specific fit; do not force them into place.
  4. Kararlılığı Doğrulayın: Once inserted, gently attempt to wiggle the holders to confirm they are stable and do not move excessively. Proper seating is crucial for accurate fiber alignment during splicing.

The fiber holders are now ready for use with your fusion splicer.

5. Kullanım Talimatları

These fiber holders are integral to the fusion splicing process when using SC type splice-on connectors. Follow the general operating procedures of your KOMSHINE GX36/GX37 fusion splicer, incorporating these steps for fiber and connector preparation.

  1. Prepare the Fiber:
    • Strip the fiber optic cable to the required length, exposing the bare fiber.
    • Clean the bare fiber thoroughly with a lint-free wipe soaked in isopropyl alcohol.
    • Cleave the fiber using a precision fiber cleaver to achieve a clean, perpendicular end face.
  2. Place Fiber in Holder:
    • Cl'yi açamp on one of the fiber holders.
    • Carefully place the prepared fiber into the V-groove of the holder, ensuring the cleaved end is positioned correctly for splicing.
    • Cl'yi kapatınamp to secure the fiber without excessive pressure.
  3. Prepare the SC Splice-on Connector:
    • Disassemble the SC splice-on connector according to its specific instructions, exposing the internal fiber stub.
    • Clean and cleave the fiber stub within the connector if necessary, following the connector manufacturer's guidelines.
  4. Place Connector in Holder:
    • Cl'yi açamp on the second fiber holder.
    • Carefully place the prepared SC splice-on connector into the V-groove, ensuring its fiber stub is aligned for splicing.
    • Cl'yi kapatınamp to secure the connector.
  5. Perform Fusion Splicing:
    • Place both fiber holders, with the fiber and connector secured, into the fusion splicer's alignment mechanism.
    • Follow the fusion splicer's on-screen instructions to perform the splicing process. The splicer will automatically align the fibers and execute the fusion splice.
  6. Post-Splicing:
    • After the splice is complete and the splicer indicates success, carefully open the clamps on the fiber holders.
    • Remove the spliced fiber and connector.
    • Proceed with heat shrinking or securing the splice protection sleeve as per the SC connector's instructions.

6. Bakım

Proper maintenance of your fiber holders ensures consistent performance and extends their lifespan.

  • Temizlik: Regularly inspect the V-grooves and clamping surfaces for dust, fiber debris, or other contaminants. Use a lint-free cloth moistened with isopropyl alcohol to gently clean these areas. Avoid abrasive materials that could scratch the surfaces.
  • Depolamak: When not in use, store the fiber holders in a clean, dry, and dust-free environment, preferably in their original packaging or a protective case.
  • Denetleme: Periodically check for any signs of wear, deformation, or damage to the clamping mechanism. If significant wear or damage is observed, replacement may be necessary to maintain splicing accuracy.

7. Sorun Giderme

If you encounter issues during splicing that may be related to the fiber holders, consider the following:

SorunOlası NedenÇözüm
High splice loss or poor alignment
  • Dust or debris in V-grooves
  • Improper fiber placement
  • Damaged fiber holder
  • Clean V-grooves thoroughly.
  • Re-seat fiber/connector carefully.
  • Inspect holder for damage; replace if necessary.
Fiber not securely held
  • Clamp not fully closed
  • Debris preventing full closure
  • Aşınmış clampmekanizma
  • cl'yi sağlayınamp tamamen meşgul.
  • temiz clampyüzeyler.
  • Replace holder if mechanism is worn.
Difficulty inserting holders into splicer
  • Misalignment with splicer slots
  • Debris in splicer slots or on holder base
  • Ensure correct orientation and gentle insertion.
  • Clean both splicer slots and holder base.

For issues not covered here, refer to your KOMSHINE GX36/GX37 fusion splicer manual or contact KOMSHINE technical support.

8. Özellikler

  • Ürün Türü: Fiber Optic SOC Splice-on Connector / Fiber Holder
  • Uyumluluk: KOMSHINE GX36, KOMSHINE GX37 Fusion Splicers
  • Connector Type Supported: SC (Splice-on Connector)
  • Malzeme: Precision-machined metal and durable polymer
  • Renk: Black (as per product specifications)
  • Miktar: One pair (two units)

9. Destek

For technical assistance, product inquiries, or warranty information, please contact KOMSHINE customer support through their official website or your local distributor. Please have your product model information ready when contacting support.

Üretici: Komshine Technologies Limited

İlk Mevcut Tarih: 4 Mart 2019

İlgili Belgeler - GX36/GX37 Compatible Accessory

Önview Komshine FX39 Fiber Optik Füzyon Ekleyici: Özellikler, Teknik Özellikler ve Performans
Yüksek performanslı fiber optik füzyon ekleyici Komshine FX39'u keşfedin. Hızlı ekleme (6 sn), düşük kayıp (0.01 dB), dayanıklı tasarım, 7800 mAh pil ve gelişmiş hizalama teknolojilerini keşfedin.
Önview KomShine FX39 Trunk Optik Fiber Füzyon Ekleyici - Yüksek Hızlı Ekleme ve Isıtma
6 saniyede hızlı ekleme, 16 saniyede hızlı ısıtma ve ortalama 0.01 dB'lik bir ekleme kaybı sunan güçlü bir gövde optik fiber füzyon ekleyicisi olan KomShine FX39'u keşfedin. Dayanıklı tasarımı, yüksek çözünürlüklü LCD ekranı ve 7800 mAh pili hakkında bilgi edinin.
Önview Komshine KFI-35 Optik Fiber Tanımlayıcı Kullanım Kılavuzu
Komshine KFI-35 Optik Fiber Tanımlayıcısı için özellikleri, ürün parametrelerini, kullanım talimatlarını ve fiber bakımı için güvenlik ipuçlarını ayrıntılı olarak açıklayan kullanıcı kılavuzu.
Önview Komshine KIP-600V Fiber Optik Konnektör İnceleme Sistemi
Komshine KIP-600V, 400x büyütme, 3.5 inç HD LCD ekran ve 20 saate kadar bekleme süresi sağlayan 4000 mAh pil ile donatılmış bir fiber optik konnektör inceleme sistemidir. TF kart üzerinden gerçek zamanlı video kaydı ve oynatmayı destekler ve FC, SC, ST ve LC gibi çeşitli konnektör tipleriyle uyumludur.
Önview Komshine KPM-35 Optik Güç Ölçer Kullanım Kılavuzu
Komshine KPM-35 Optik Güç Ölçer için özelliklerini, işlevlerini, kalibrasyonunu, sorun gidermeyi, ürün parametrelerini ve optik fiber ağ projeleri için kullanım ipuçlarını kapsayan kapsamlı kullanıcı kılavuzu.
Önview Komshine QX43 FTTx-OTDR Hızlı Kılavuz - Optik Zaman Alanlı Refleksometre
Komshine QX43 FTTx-OTDR'nin özelliklerini, test kurulumunu, eğri manipülasyonunu ve olay listesini kapsayan kısa bir kılavuz. file Optik fiber testlerinde yönetim ve olay türü anlamları.