Lithonia Lighting FMVCCLS 12IN MVOLT 30K35K40K 90CRI BN M6

Lithonia Lighting FMVCCLS 12-Inch LED Vanity Fixture Instruction Manual

Marka: Lithonia Lighting | Modeli: FMVCCLS 12IN MVOLT 30K35K40K 90CRI BN M6

1. Ürün Bittiview

The Lithonia Lighting FMVCCLS 12-inch LED Vanity Fixture is designed to provide efficient and high-quality illumination for bath and powder rooms. This fixture features integrated LED technology and a switchable white color temperature function, allowing adjustment to 3000K, 3500K, or 4000K during installation. Its contemporary cylinder design with a brushed nickel finish offers a modern aesthetic.

Lithonia Lighting FMVCCLS 12-inch LED Vanity Fixture, brushed nickel finish, cylindrical design.

Figure 1: Lithonia Lighting FMVCCLS 12-inch LED Vanity Fixture.

Temel Özellikler:

Resmi Ürün Videosu:

Video 1: Bittiview of the Lithonia Lighting LED Vanity Collection, showcasinÇeşitli modeller ve özellikler.

2. Güvenlik Bilgileri

UYARI: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All wiring connections must be in accordance with local and national electrical codes.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

4. Kurulum Talimatları

This fixture can be mounted on a wall or ceiling, in either a vertical or horizontal orientation.

  1. Kurulum için Hazırlanın: Sigortadan elektriği kesin.
  2. Eski armatürü çıkarın (varsa): Carefully disconnect and remove the existing fixture.
  3. Montaj Braketini Takın: Birlikte verilen vidaları kullanarak montaj braketini bağlantı kutusuna sabitleyin. Sıkıca takıldığından emin olun.
  4. Renk Sıcaklığını Seçin: Before final mounting, locate the color temperature switch inside the fixture. Select your desired color temperature (3000K, 3500K, or 4000K). This setting cannot be changed easily after installation.
  5. Kablo Bağlantıları: Connect the fixture's wires to the junction box wires:
    • Aydınlatma armatüründen gelen siyah kabloyu, bağlantı kutusundan gelen siyah (faz) kabloya bağlayın.
    • Aydınlatma armatüründen gelen beyaz kabloyu, bağlantı kutusundan gelen beyaz (nötr) kabloya bağlayın.
    • Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box.
    • Tüm bağlantıları kablo somunlarıyla sabitleyin.
  6. Fikstürü Takın: Aydınlatma armatürünü montaj braketiyle dikkatlice hizalayın ve yerine sabitleyin.
  7. Gücü Geri Yükle: Devre kesicideki gücü açın.

Dimensions and Mounting Options:

Diagram showing the dimensions of the 12-inch Lithonia Lighting FMVCCLS vanity fixture, including length, width, and depth measurements.

Şekil 2: Kurulum planlaması için ürün boyutları.

The fixture measures approximately 12 inches in length, 12 inches in width, and 12 inches in height (Note: The product dimensions provided in the specifications are generic. Refer to Figure 2 for specific measurements). It can be installed with or without a backplate, depending on your aesthetic preference and electrical box configuration.

Bathroom vanity with the Lithonia Lighting FMVCCLS fixture installed horizontally above a mirror.

Şekil 3: Ör.ample of horizontal installation above a mirror.

5. Kullanım Talimatları

Once installed and power is restored, the fixture will illuminate at the pre-selected color temperature. There are no external controls for color temperature adjustment after installation; any changes require accessing the internal switch (refer to Installation Step 4).

The fixture is designed for simple on/off operation via a standard wall switch (not included).

6. Bakım

7. Sorun Giderme

SorunOlası NedenÇözüm
Aydınlatma armatürü yanmıyor.
  • Armatürde güç yok.
  • Gevşek kablo bağlantısı.
  • Duvar şalteri arızalı.
  • Sigortayı veya sigortayı kontrol edin.
  • Tüm kablo bağlantılarının güvenli olduğundan emin olun (öncelikle elektriğin kapalı olduğundan emin olun).
  • Duvar şalterini test edin veya değiştirin.
Light is too bright or not the desired color.Renk sıcaklığı anahtarı yanlış ayarlanmış.Turn off power, access the internal color temperature switch, and adjust to the desired setting (refer to Installation Step 4).
Işık titriyor.
  • Gevşek kablolama.
  • Uyumsuz dimmer anahtarı (varsa).
  • Check all wire connections (ensure power is off first).
  • This fixture is not explicitly stated as dimmable. If a dimmer is used, ensure it is compatible with LED fixtures. If flickering persists, remove the dimmer and use a standard on/off switch.

8. Özellikler

ÖzellikDetay
MarkaLithonia Aydınlatma
Model AdıFMVCCLS 12IN MVOLT 30K35K40K 90CRI BN M6
ASINB07P6TDH67
Renk SıcaklığıSwitchable (3000K, 3500K, 4000K)
MalzemePlastic (Acrylic diffuser), Brushed Nickel housing
StilSilindir
Işık Kaynağı TürüNEDEN OLMUŞ
ParlaklıkUp to 880 Lumens (at 4000K)
CRI90
Netage18 watt
Cilttage277 Volts (MVOLT implies multi-voltage, typically 120-277V)
Ürün Boyutları12"L x 12"W x 12"H (Note: Actual fixture length is 12 inches, other dimensions are likely packaging or general category)
Ürün Ağırlığı1.5 Pound
Kurulum TürüTavana Montaj, Duvara Montaj
İç/Dış Mekan KullanımıKapalı
Özel ÖzellikRenk Sıcaklığı Değiştirilebilir
Şartname KarşılandıENERGY STAR®, ADA

9. Garanti ve Destek

Garanti: This Lithonia Lighting fixture comes with a 5-year limited warranty. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the manufacturer's official webalan.

Müşteri Desteği: If you encounter any issues or have questions regarding the installation, operation, or maintenance of your fixture, please contact Lithonia Lighting customer service. Contact information can typically be found on the product packaging or the official Lithonia Lighting webalan.