GÜDE GTB 14/509 Tezgah Üstü Matkap Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your GÜDE GTB 14/509 Bench Drill Press. Please read these instructions thoroughly before initial use and keep them for future reference. Proper use and adherence to safety guidelines will ensure optimal performance and extend the lifespan of your tool.

2. Güvenlik Talimatları

Elektrikli aletleri kullanırken her zaman güvenliğe öncelik verin. Bu talimatlara uyulmaması ciddi yaralanmalara veya ekipman hasarına yol açabilir.

• Kılavuzu okuyun: Matkap tezgahını çalıştırmadan önce tüm talimatları ve uyarıları dikkatlice okuyun.
• Kişisel Koruyucu Ekipman (KKD) giyin: Daima güvenlik gözlüğü, kulak koruması ve uygun iş eldivenleri kullanın. Hareketli parçalara takılabilecek bol giysiler veya takılardan kaçının.
• Çalışma Alanınızı Temiz Tutun: Çalışma alanını iyi aydınlatılmış ve dağınıklıktan uzak tutun.
• İş Parçasını Güvenli Hale Getirin: Her zaman clamp the workpiece firmly to the drill table to prevent rotation or movement during drilling.
• Doğru matkap uçlarını kullanın: Ensure drill bits are sharp, correctly sized for the chuck, and suitable for the material being drilled.
• Adjust Speed Appropriately: Select the correct spindle speed for the material and drill bit size.
• Aşırıya kaçmaktan kaçının: Her zaman uygun ayak ve dengeyi koruyun.
• Gücü Kesin: Always unplug the drill press before making adjustments, changing drill bits, or performing maintenance.
• Never Leave Running Unattended: Makineyi gözetimsiz çalışır halde bırakmayın.
• Muhafızları Yerinde Tutun: Ensure all safety guards, including the chip guard, are properly installed and functioning.

3. Ürün Bittiview ve Bileşenler

The GÜDE GTB 14/509 is a robust bench drill press designed for precise drilling in various materials such as wood, metal, and plastic. It features a powerful motor, adjustable speed settings, and a versatile work table.

3.1 Main Product View

Şekil 1: Ön view of the GÜDE GTB 14/509 Bench Drill Press, showing the headstock, column, work table, and base.

3.2 Component Diagram and Technical Information

Figure 2: Detailed diagram illustrating various components and technical specifications of the GÜDE GTB 14/509. This includes views of the headstock, motor housing, chuck, work table, and base, along with a table of technical data.

4. Kurulum ve Montaj

4.1 Paketin açılması

• Tüm bileşenleri dikkatlice ambalajından çıkarın.
• Check for any shipping damage. If damage is found, contact your supplier immediately.
• Paketleme listesinde listelenen tüm parçaların mevcut olduğunu doğrulayın.

4.2 Montaj

Assembly typically involves attaching the column to the base, mounting the work table, and securing the headstock. Refer to the detailed assembly instructions provided in the manufacturer's original manual for precise steps.

1. Attach the column to the base using the provided bolts and washers. Ensure it is securely fastened.
2. Slide the work table assembly onto the column and secure it at a suitable height.
3. Mount the headstock onto the top of the column, ensuring all electrical connections are properly routed and secured.
4. Install the drill chuck onto the spindle taper.
5. Attach the chip guard and any other safety accessories.

5. Kullanım Talimatları

5.1 Güç Bağlantısı

Connect the drill press to a standard 230V, 50Hz power outlet. Ensure the power switch is in the 'OFF' position before plugging in the machine.

5.2 Adjusting Spindle Speed

The GÜDE GTB 14/509 features a V-belt drive with 9 speed settings, allowing for a spindle speed range of 500-2500 rpm. To change the speed:

1. Matkap presini güç kaynağından ayırın.
2. Open the belt housing cover.
3. Loosen the motor tensioning bolt.
4. Adjust the V-belt to the desired pulley combination according to the speed chart inside the belt housing cover.
5. Re-tension the motor and close the belt housing cover.
6. Gücü tekrar bağlayın.

5.3 Matkap Uçlarının Değiştirilmesi

The drill press is equipped with a 1.5-16 mm geared drill chuck.

1. Gücü kesin.
2. Use the chuck key to loosen the chuck jaws.
3. Remove the old drill bit.
4. Insert the new drill bit, ensuring it is centered and fully seated in the chuck jaws.
5. Mandren çenelerini mandren anahtarıyla sıkıca sıkın. Sıkma işleminden hemen sonra mandren anahtarını çıkarın.

5.4 Workpiece Setup

The work table is height-adjustable, 360° swiveling, and +/- 45° inclinable for versatile drilling operations.

• Masa Yüksekliğinin Ayarlanması: Loosen the table locking lever, adjust the table to the desired height, and re-tighten.
• Tilting Table: Loosen the tilt locking bolts, adjust the table to the desired angle (up to 45°), and re-tighten.
• İş Parçasının Sabitlenmesi: Her zaman cl'yi kullanamps or a drill press vise to firmly secure the workpiece to the table. Never hold the workpiece by hand.
• Adjusting Depth Stop: Set the adjustable drilling depth stop for precise and repeatable drilling depths.

5.5 Drilling Operation

1. İş parçasının güvenli bir şekilde temizlendiğinden emin olunamped and the correct speed is selected.
2. Lower the spindle manually to check alignment and ensure the drill bit will not contact the table or vise.
3. Switch on the drill press using the ON/OFF switch.
4. Slowly lower the drill bit into the workpiece using the feed handle, applying steady, even pressure.
5. İstenilen derinliğe ulaşıldığında, matkap ucunu iş parçasından geri çekin.
6. Switch off the drill press and wait for the spindle to come to a complete stop before removing the workpiece.

6. Bakım

Regular maintenance ensures the longevity and safe operation of your drill press. Always disconnect power before performing any maintenance.

6.1 Temizlik

• After each use, clean the drill press to remove chips, dust, and debris. Use a brush or vacuum cleaner; never use compressed air directly on moving parts.
• Tüm yüzeyleri temiz ve kuru bir bezle silin.

6.2 Yağlama

• Periodically apply a light machine oil to the column, spindle, and other moving parts to ensure smooth operation and prevent rust.
• Check the V-belt for wear and tension. Replace if worn or cracked.

6.3 Depolama

Store the drill press in a dry, clean environment, protected from moisture and extreme temperatures.

7. Sorun Giderme

Bu bölümde, matkap tezgahınızla karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

8. Teknik Özellikler

The following table provides detailed technical specifications for the GÜDE GTB 14/509 Bench Drill Press.

9. Garanti ve Destek

GÜDE products are manufactured to high-quality standards and undergo strict quality controls. In the unlikely event of a defect, please contact your retailer or the GÜDE customer service for warranty claims and support.

For further information, spare parts, or service inquiries, please visit the official GÜDE webalan: www.guede.com