giriiş
The Hager EMN001 is a staircase time delay switch designed to control lighting circuits by automatically switching off the lights after a user-defined period. This device enhances energy efficiency and safety in common areas such as stairwells, corridors, and basements. It features an adjustable time delay and a compact design for DIN-rail mounting.
This manual provides essential information for the safe and correct installation, operation, and maintenance of your EMN001 time delay switch. Please read it thoroughly before installation and keep it for future reference.
Güvenlik Bilgileri
UYARI: Electrical installation should only be performed by a qualified electrician in accordance with national wiring regulations and safety standards. Failure to follow these instructions can result in electric shock, fire, or serious injury.
- Cihazı takmadan veya bakımını yapmadan önce daima ana devre kesiciden elektriği kesin.
- Tedarik hacmini sağlayıntage, cihazın nominal voltajıyla eşleşir.tag(230V).
- Do not exceed the maximum load capacity of the switch (2300W for incandescent lamps, 16A AC1).
- Cihazı nemden ve aşırı sıcaklıklardan koruyun.
- This product is not battery-operated and does not contain hazardous materials requiring special disposal.
Ürün Bittiview
The Hager EMN001 is a compact, modular device designed for integration into electrical distribution boards. Key features include:
- 30 saniyeden 10 dakikaya kadar ayarlanabilir zaman gecikmesi.
- Two-position switch for permanent ON or timed operation.
- Pre-warning function for enhanced safety before lights switch off.
- DIN-rail mounting for easy installation.
Şekil 1: Ön view of the Hager EMN001 Staircase Time Delay Switch, showing the time adjustment dial and the permanent/timed operation switch.
Kurulum Talimatları
- Güç Bağlantısının Kesilmesi: Before starting any electrical work, ensure the main power supply to the circuit is completely disconnected at the consumer unit/circuit breaker. Verify with a voltage test cihazı.
- Montaj: Mount the EMN001 switch onto a standard DIN rail within an appropriate enclosure.
- Kablolama: Doğru bağlantılar için lütfen aşağıdaki bağlantı şemasına bakın.
- Connect the Live (L) and Neutral (N) supply wires to the corresponding terminals on the switch.
- Connect the switched Live output to the lighting circuit.
- Connect the push-button input (if applicable for staircase lighting) to the designated terminal.
- Gevşek bağlantıları önlemek için tüm vida terminallerinin iyice sıkıldığından emin olun.
- Kablo Özellikleri: Use flexible cables with a cross-section of 1 to 6 mm² or solid cables with a cross-section of 1.5 to 10 mm².
- Güç Restorasyonu: Tüm bağlantılar güvenli ve doğrulandıktan sonra devreye gücü geri verin.
Şekil 2: Wiring diagram for the Hager EMN001 Staircase Time Delay Switch. Shows connections for Live (L), Neutral (N), push-buttons, and lighting loads.
Kullanım Talimatları
Zaman Gecikmesi Ayarı
The time delay can be adjusted using the rotary dial on the front of the device. The range is from 30 seconds to 10 minutes. Rotate the dial clockwise to increase the delay time and counter-clockwise to decrease it. Set the desired time according to your application requirements.
Çalışma Modu Seçimi
The EMN001 features a two-position switch for selecting the operation mode:
- Timed Mode (Timer Symbol): In this mode, the lights will switch on when a connected push-button is pressed and will automatically switch off after the preset time delay has elapsed. This is the standard mode for staircase lighting.
- Permanent ON Mode (Light Bulb Symbol): In this mode, the lights will remain continuously on, bypassing the time delay function. This is useful for extended periods of illumination, such as during cleaning or maintenance.
Pre-warning Function
For enhanced safety, the EMN001 includes a pre-warning function. Before the lights switch off completely, they will briefly dim or flash to alert users that the timed period is about to end, allowing them to reactivate the lights if needed.
Bakım
The Hager EMN001 time delay switch is designed for maintenance-free operation. However, periodic checks are recommended:
- Görsel Muayene: Periodically inspect the device for any signs of damage, discoloration, or loose connections.
- Temizlik: Gerekirse, cihazın dış yüzeyini kuru, yumuşak bir bezle nazikçe temizleyin. Aşındırıcı temizleyiciler veya çözücüler kullanmayın.
- İşlev Kontrolü: Occasionally test the time delay function and the permanent ON mode to ensure proper operation.
If any issues are detected, disconnect power immediately and consult a qualified electrician.
Sorun giderme
If you experience problems with your Hager EMN001 switch, refer to the following table:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Işıklar açılmıyor. | No power supply, faulty wiring, faulty push-button, or faulty lamp. | Check circuit breaker. Verify wiring connections. Test push-button and lamp. |
| Lights stay on permanently in timed mode. | Switch set to permanent ON mode, or a stuck push-button. | Ensure the mode switch is set to the timed (timer symbol) position. Check push-buttons for sticking. |
| Lights turn off too quickly or too slowly. | Incorrect time delay setting. | Adjust the time delay dial to the desired duration. |
| Pre-warning function not working. | Cihaz arızası. | Consult a qualified electrician for inspection or replacement. |
Bu çözümleri denedikten sonra sorun devam ederse, yetkili bir elektrikçiyle veya Hager müşteri desteğiyle iletişime geçin.
Teknik Özellikler
| Parametre | Değer |
|---|---|
| Örnek | EMN001 |
| Nominal Çalışma Hacmitage | 230 V AC |
| Sıklık | 50/60 Hz |
| Max. Power (Incandescent Lamps) | 2300 B |
| Rated Current (AC1) | 16A |
| Time Delay Adjustment Range | 30 saniyeden 10 dakikaya |
| Bağlantı Türü | Vida terminalleri |
| Flexible Cable Cross-section | 1 - 6 mm² |
| Solid Cable Cross-section | 1.5 - 10 mm² |
| Montaj Yöntemi | DIN-Ray |
| Çalışma Sıcaklığı | -10 °C ila +55 °C |
| Depolama Sıcaklığı | -20 °C ila +60 °C |
| IP Koruma Derecesi | IP20 |
| Boyutlar (Nakliye) | 8x6x4 cm |
| Ürün Ağırlığı | 150 gram |
| Piller Gerekli | HAYIR |
| Menşei ülke | Fransa |
Garanti ve Destek
Hager products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or visit the official Hager website. In case of technical issues or questions not covered in this manual, please contact your local Hager distributor or customer support for assistance.
Daha fazla bilgi için şu adresi ziyaret edebilirsiniz: Hager brand page on Amazon.
