STEALTH SAQ-1301 Hava Kompresörü Kullanım Kılavuzu

1. Önemli Güvenlik Bilgileri

Always read and understand all safety warnings and instructions before operating the air compressor. Failure to follow these warnings may result in serious injury or property damage.

• Elektriksel Güvenlik: Ensure the compressor is connected to a properly grounded 120 Volt, 750 Watt (1 Horsepower) power supply. Do not operate in wet conditions.
• Basınç Güvenliği: The maximum operating pressure is 125 PSI. Do not exceed the rated pressure of any tool or accessory. The unit features a safety valve that automatically opens if pressure reaches excessive levels.
• İşitme Koruması: Although designed for quiet operation (65 dB), prolonged exposure to noise can cause hearing damage. Always wear appropriate hearing protection.
• Göz Koruması: Always wear ANSI Z87.1 approved safety glasses with side shields when operating the compressor or using air tools.
• Hareketli parçalar: Ellerinizi, saçlarınızı ve bol giysilerinizi hareketli parçalardan uzak tutun.
• Aşırı Isınma Koruması: The compressor is equipped with automatic overheat protection. If the motor overheats, it will shut down automatically. Allow it to cool before restarting.

2. Ürün Bittiview

The STEALTH SAQ-1301 is a 3-gallon, 1.0 HP, oil-free, and ultra-quiet air compressor designed for a variety of applications. Its compact and portable design makes it suitable for both indoor and outdoor use.

Şekil 2.1: Ön view of the STEALTH SAQ-1301 3 Gallon Air Compressor.

Temel Özellikler:

• Ticari Sınıf Performans: Provides continuous and stable high-voltage output up to 150 PSI.
• Leading Silent Technology: Operating noise as low as 65 decibels, suitable for indoor and outdoor use.
• Easy Cold Start: Requires low amps for easier startup in cold weather.
• Taşınabilir Tasarım: Lightweight aluminum alloy body with rubber reinforced handle and bases.
• Convenient Operation Panel: Integrated LED display and intuitive control buttons for monitoring air pressure and adjusting settings.

Figure 2.2: The SAQ-1301 compressor highlighting its 3-gallon tank, 1.0 HP motor, 150 PSI max pressure, 2.5 CFM, portability, oil-free design, cold-weather start, and long-life cycle.

Figure 2.3: The compressor is suitable for a wide range of applications including roofing nailers, finishing nailers, brad nailers, flooring nailers, and general inflation tasks.

Bileşen Tanımlaması:

• Tank Basınç Göstergesi: Hava tankının içindeki basıncı gösterir.
• Regülatör Düğmesi: Adjusts the output air pressure to the tool.
• Line Out / Tool Pressure Gauge: Displays the regulated air pressure supplied to the tool.
• Hızlı Bağlantı Parçası: For easy hose connection.
• Tahliye vanası: Located at the bottom of the tank, used to remove moisture.
• Emniyet Vanası: Aşırı basıncı önlemek için fazla basıncı tahliye eder.
• Plastik ayak: Reduce vibration and enhance stability during operation.

Figure 2.4: The Air Pressure Regulator allows adjustment of the pressure inside the line to the tool being used.

Figure 2.5: The Safety Valve automatically opens to prevent excessive pressure build-up if pressure reaches the preset level.

Figure 2.6: Sturdy rubber feet are designed to reduce vibration and enhance the stability of the compressor during operation.

3. Kurulum ve İlk Kullanım

Paketin açılması:

Carefully remove the compressor from its packaging. Inspect for any shipping damage. Ensure all components listed in the manual are present.

Atama:

Place the compressor on a firm, level surface. The rubber feet will help reduce vibration. Ensure adequate ventilation around the unit.

Elektrik Bağlantısı:

Connect the power cord to a grounded 120V AC outlet. The compressor is designed for low-amp startup, making it easier to use in various conditions.

İlk Alıştırma Prosedürü:

1. With the drain valve fully open, turn on the compressor.
2. Allow the compressor to run for 30 minutes with no pressure building in the tank. This helps to properly seat the motor components.
3. After 30 minutes, turn off the compressor and close the drain valve. The unit is now ready for use.

4. Operasyon

Havalı Aletlerin Bağlantısı:

1. Ensure the compressor is off and unplugged before connecting or disconnecting air tools.
2. Attach your air hose to the quick connect coupler on the compressor's control panel.
3. Connect your air tool to the other end of the hose.

Figure 4.1: The compressor easily connects to various pneumatic tools, such as a finishing nailer, for efficient operation.

Hava Basıncının Ayarlanması:

1. Plug in the compressor and turn it on. Allow the tank to fill to its maximum pressure (150 PSI).
2. Turn the regulator knob (blue knob) to adjust the output pressure displayed on the 'TOOL' gauge. Set the pressure according to the requirements of your air tool.
3. The compressor will automatically cycle on and off to maintain tank pressure between 120 PSI (cut-in) and 150 PSI (cut-out).

Uygulamalar:

The SAQ-1301 is versatile and can be used for:

• Hava Fırçalama
• Drilling (with appropriate pneumatic drill)
• Nailing (brad, finish, roofing, flooring nailers)
• Sanding (with appropriate pneumatic sander)
• Spraying (paint sprayers)
• Lastik şişirme

Figure 4.2: The compressor is shown in a woodworking application, demonstrating its utility for tasks like trim installation.

Figure 4.3: The portable design and sufficient pressure make it ideal for tire inflation for vehicles and other inflatables.

5. Bakım

Regular maintenance ensures the longevity and optimal performance of your STEALTH air compressor.

Hava tankını boşaltın:

Moisture will accumulate in the air tank. To prevent corrosion and ensure proper operation, drain the tank daily or after each use.

1. Turn off the compressor and unplug it from the power source.
2. Place a suitable container under the drain valve located at the bottom of the tank.
3. Slowly open the drain valve to release air and moisture.
4. Tüm hava ve nem dışarı atıldıktan sonra tahliye vanasını iyice kapatın.

Figure 5.1: The drain valve is used to remove moisture from the air tank after the compressor is shut off, preventing rust and maintaining air quality.

Yağsız Pompa:

This compressor features an oil-free pump, eliminating the need for oil changes and reducing overall maintenance requirements.

Genel Temizlik:

Keep the compressor clean and free of dust and debris. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.

6. Sorun Giderme

Bu bölümde hava kompresörünüzde karşılaşabileceğiniz yaygın sorunlar ele alınmaktadır.

Bu çözümleri denedikten sonra sorun devam ederse müşteri desteğiyle iletişime geçin.

7. Özellikler

8. Garanti ve Destek

Garanti Bilgileri:

The STEALTH SAQ-1301 Air Compressor comes with a Limited Lifetime Warranty. Please refer to the warranty documentation included with your product for full details and restrictions.

Müşteri Desteği:

For technical assistance, parts, or warranty claims, please contact STEALTH customer support. Keep your model number (SAQ-1301) and proof of purchase readily available when contacting support.

You can also visit the official Stealth Store for more information and product resources: Stealth Store on Amazon