1. Giriş
This manual provides essential information for the safe installation, operation, and maintenance of your ET2 E42016-90BRZ LED Round Mirror. This mirror features an anodized bronze finish and integrated LED lighting, designed to enhance various interior spaces. Please read this manual thoroughly before proceeding with installation or use.
Resim 1.1: Ön view of the ET2 E42016-90BRZ LED Round Mirror with anodized bronze finish and illuminated LED edge.
2. Güvenlik Bilgileri
UYARI: Elektrik çarpması, yangın veya kişisel yaralanma riskini azaltmak için tüm talimatları dikkatlice okuyun ve uygulayın.
- Kurulum veya bakım işlemlerinden önce daima ana devre kesiciden elektriği kesin.
- Kurulum, tüm yerel elektrik yönetmeliklerine uygun olarak, yetkili bir elektrikçi tarafından yapılmalıdır.
- Do not install this product in areas with excessive moisture or direct water exposure unless specifically rated for such environments.
- Handle the mirror with care to prevent breakage. Wear appropriate safety gear, such as gloves and eye protection, during installation.
- Ensure the mounting surface is structurally sound and capable of supporting the mirror's weight (approximately 16.36 pounds).
- Do not attempt to modify or disassemble the LED components. There are no user-serviceable parts inside.
3. Paket İçeriği
Kuruluma başlamadan önce tüm bileşenlerin mevcut ve hasarsız olduğundan emin olun. Herhangi bir parça eksik veya hasarlıysa, derhal müşteri hizmetleriyle iletişime geçin.
- 1 x ET2 E42016-90BRZ LED Round Mirror
- 1 x Installation Hardware Kit (screws, anchors, mounting bracket)
- 1 x Kullanım Kılavuzu (bu belge)
4. Kurulum ve Kurulum
This mirror is designed for wall-mounted installation and can be oriented horizontally or vertically. Professional installation is recommended due to electrical wiring requirements.
4.1 Gerekli Araçlar (Dahil Değildir)
- Yıldız uçlu tornavidalar
- Uygun matkap uçları ile delin
- Seviye
- Ölçüm bandı
- Kalem
- Tel striptizci
- Elektrik bandı
4.2 Kurulum Adımları
- Gücü Kapatın: Locate the circuit breaker controlling the desired installation location and turn off the power. Verify power is off using a voltage test cihazı.
- Montaj Yerini Belirleyin: Choose a suitable location on the wall. Consider the mirror's dimensions (27.5"L x 27.5"W) and ensure there is adequate space and a power source.
- Marka Montaj Noktaları: Hold the mounting bracket against the wall at the desired height and use a level to ensure it is straight. Mark the screw hole locations with a pencil.
- Matkap Delikleri: Drill pilot holes at the marked locations. Insert wall anchors if necessary (for drywall installation).
- Montaj Braketini Takın: Secure the mounting bracket to the wall using the provided screws. Ensure it is firmly attached.
- Elektrik Bağlantısı: Carefully connect the mirror's electrical wires to the household wiring. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Use wire nuts and electrical tape to secure connections. Ensure all connections are tight and properly insulated.
- Aynayı monte edin: Carefully lift the mirror and align its mounting points with the bracket. Secure the mirror to the bracket according to the specific design (e.g., sliding it onto the bracket, or securing with additional screws).
- Gücü Geri Yükle: Once the mirror is securely mounted and all electrical connections are complete, restore power at the circuit breaker.
Image 4.1: Dimensional diagram of the mirror, indicating a 27.5-inch diameter and 1.5-inch depth.
5. Kullanım Talimatları
The ET2 E42016-90BRZ LED Round Mirror features integrated LED lighting with adjustable brightness and color temperature. A touch sensor is typically located on the mirror surface for control.
5.1 Güç Açma/Kapatma
Locate the touch sensor icon on the mirror surface. A single tap will typically turn the LED lighting on or off.
5.2 Parlaklık ve Renk Sıcaklığının Ayarlanması
If the mirror supports adjustable brightness and color temperature, these functions are usually controlled via the same touch sensor or a series of taps/holds:
- Parlaklık: Press and hold the touch sensor to cycle through brightness levels. Release when the desired brightness is achieved.
- Renk Sıcaklığı: Multiple taps on the touch sensor may cycle through different color temperature settings (e.g., warm white, neutral white, cool white). Refer to the specific functionality of your mirror model.
The mirror's LED provides 1540 lumens of light with a color temperature of 3000 Kelvin, ensuring clear and vibrant illumination.
6. Bakım
Proper care will ensure the longevity and appearance of your LED mirror.
6.1 Ayna Yüzeyinin Temizlenmesi
- Use a soft, lint-free cloth and a non-abrasive glass cleaner.
- Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the electrical components.
- Wipe the mirror surface gently until clean and streak-free.
6.2 Çerçevenin Temizlenmesi
- Wipe the anodized bronze frame with a soft, dry, or slightly damp Kumaş.
- Yüzeye zarar verebileceğinden, sert kimyasallar, aşındırıcı temizleyiciler veya ovma pedleri kullanmaktan kaçının.
6.3 LED Longevity
The integrated LED lighting has a rated life of 50,000 hours and does not require bulb replacement. If the LED lighting malfunctions, contact customer support.
7. Sorun Giderme
If you encounter issues with your ET2 LED mirror, refer to the following common problems and solutions:
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| LED ışıklar açılmıyor. | No power supply; loose wiring; faulty touch sensor. | Check circuit breaker. Verify all electrical connections are secure. If problem persists, contact a qualified electrician or customer support. |
| LED ışıklar titriyor. | Dengesiz güç kaynağı; gevşek kablolama. | Ensure stable power. Check wiring connections. Consult an electrician if flickering continues. |
| Touch sensor is unresponsive. | Mirror surface is dirty; temporary electronic glitch. | Clean the mirror surface around the sensor. Turn off power at the breaker for 5 minutes, then restore to reset. |
| Mirror is not securely mounted. | Yanlış kurulum. | Review installation steps. Ensure mounting hardware is correctly installed and tightened. Seek professional assistance if needed. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Model Numarası | E42016-90BRZ |
| Marka | ET2 |
| Şekil | Yuvarlak |
| Ürün Boyutları | 27.5"L x 27.5"W (Diameter: 27.5 Inches) |
| Derinlik | 1.5 inç |
| Ürün Ağırlığı | 16.36 pound |
| Çerçeve Malzemesi | Metal (Anodized Bronze Finish) |
| Montaj Tipi | Duvara Montaj |
| Güç Kaynağı | Kablolu Elektrik |
| Cilttage | 120 Volt |
| Netage | 22 watt |
| Ampul Tipi | NEDEN OLMUŞ |
| Işık Akısı | 1540 Lümen |
| Renk Sıcaklığı | 3000 Kelvin |
| Renksel Geriverim İndeksi (CRI) | 80 |
| Rated LED Life | 50,000 saat |
| Özel Özellik | Adjustable (Brightness/Color Temperature) |
| UPC | 845094087519 |
9. Garanti Bilgileri
This ET2 LED Round Mirror is covered by a 5 yıllık üretici garantisi. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please contact ET2 customer support.
10. Müşteri Desteği
If you have any questions, require technical assistance, or need to report a problem with your ET2 LED Round Mirror, please contact ET2 customer support through their official website or the retailer from whom you purchased the product. Please have your model number (E42016-90BRZ) and proof of purchase ready when contacting support.
