Seitron Magitime Wireless Programmable Thermostat Kit KCR006

1. Giriş

The Seitron Magitime Wireless Programmable Thermostat Kit, model KCR006, provides advanced temperature control for your heating or cooling system. This kit consists of a battery-powered wireless thermostat and a single-channel receiver designed to control your boiler. The system utilizes an 868 MHz radio frequency for reliable communication, offering a range of up to 50 meters in standard building environments. This design allows for flexible installation without the need for extensive wall wiring.

This manual provides essential information for the proper installation, operation, and maintenance of your Seitron Magitime kit. Please read it thoroughly before use.

2. Güvenlik Bilgileri

• Always disconnect power to the heating/cooling system before installing or servicing the receiver.
• Elektrik tesisatı konusunda emin değilseniz, montajı mutlaka kalifiye bir teknisyen tarafından yapılmalıdır.
• Termostatı veya alıcıyı suya veya aşırı neme maruz bırakmayın.
• Use only the specified battery type for the thermostat.
• Çocukların erişemeyeceği yerde saklayınız.

3. Paket İçeriği

Paketin tüm bileşenlerinin mevcut olduğunu doğrulayın:

• Seitron Magitime Wireless Programmable Thermostat (DCW 01B)
• Wireless Receiver (DRR 01M)
• Thermostat mounting base
• Kullanım Kılavuzu
• Batteries (may be included or sold separately)

4. Ürün Bittiview

The Seitron Magitime kit comprises two main units: the wireless thermostat and the wireless receiver. The thermostat allows you to set and program your desired temperature, while the receiver connects to your heating/cooling system to execute commands received from the thermostat.

This image displays the Seitron Magitime Wireless Programmable Thermostat (left, labeled DCW 01B) and its accompanying Wireless Receiver (right, labeled DRR 01M). The thermostat features a digital display showing '16.4' and control buttons on the sides. A green plus sign indicates they are a kit.

4.1. Wireless Thermostat (DCW 01B)

• Dijital gösterge: Shows current temperature, set temperature, time, and program status.
• Kontrol Düğmeleri: Used for setting temperature, programming, and mode selection.
• Pil Bölmesi: Located on the back for power supply.

4.2. Wireless Receiver (DRR 01M)

• Durum Göstergeleri: LEDs to show power, communication, and relay status.
• Eşleştirme Düğmesi: Used to establish communication with the thermostat.
• Terminal Bloğu: For connection to the boiler/heating system.

5. Kurulum

5.1. Alıcı Kurulumu

1. Güç Bağlantısının Kesilmesi: Ensure the main power to your heating/cooling system is turned off at the circuit breaker.
2. Montaj: Mount the receiver in a suitable location near your boiler, away from large metal objects that could interfere with radio signals.
3. Kablolama: Connect the receiver to your boiler's control terminals according to the wiring diagram provided in the separate installation guide (not included in this manual). Ensure correct polarity and secure connections.
4. Güç Bağlantısı: Restore power to the heating/cooling system. The receiver's power indicator LED should illuminate.

5.2. Thermostat Setup

1. Pil Takılması: Open the battery compartment on the back of the thermostat and insert the required batteries, observing correct polarity. The display should power on.
2. Montaj: Place the thermostat on its mounting base in a central location within the heated area, away from direct sunlight, drafts, or heat sources.
3. İlk Eşleştirme:
   • On the receiver, press and hold the pairing button until its pairing LED starts flashing.
   • On the thermostat, access the pairing menu (refer to the specific button sequence in the full product manual).
   • Once paired, the receiver's pairing LED will stop flashing and remain solid, and the thermostat will indicate successful connection.
4. Tarih ve Saat Ayarı: Set the current date and time on the thermostat using the control buttons.

6. Kullanım Talimatları

6.1. Basic Temperature Setting

• In normal operating mode, use the UP/DOWN buttons to adjust the desired temperature. The new setting will be active until the next programmed event or manual override.

6.2. Mode Selection (Heating/Cooling)

• Press the MODE button (or similar, refer to your specific model's button layout) to cycle through available modes: Heating, Cooling, Auto, Off. Select the appropriate mode for your system.

6.3. Haftalık Program Takvimi

The Magitime thermostat allows for weekly programming to optimize energy consumption.

1. Program Moduna Girin: Press the PROGRAM button (or similar) to enter the scheduling interface.
2. Select Day: Use navigation buttons to select the day of the week you wish to program.
3. Set Time Periods and Temperatures: For each day, you can typically set multiple time periods with corresponding desired temperatures. Adjust the start time and temperature for each period.
4. Copy Programs: Some models allow copying programs from one day to another.
5. Program Modundan Çıkış: Save your settings and exit program mode. The thermostat will now follow the set schedule.

6.4. Gelişmiş Fonksiyonlar

Refer to the comprehensive product manual for details on advanced functions such as holiday mode, anti-freeze protection, and calibration settings.

7. Bakım

7.1. Pil Değişimi

• When the low battery indicator appears on the thermostat display, replace the batteries promptly.
• Termostatın arkasındaki pil bölmesini açın.
• Remove old batteries and insert new ones, ensuring correct polarity.
• Eski pilleri yerel düzenlemelere uygun şekilde sorumlu bir şekilde atın.

7.2. Temizlik

• Clean the thermostat and receiver surfaces with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the units.

8. Sorun Giderme

Burada listelenmeyen sorunlarla karşılaşırsanız veya çözümler sorunu çözmezse, lütfen müşteri desteğiyle iletişime geçin.

9. Özellikler

10. Garanti ve Destek

Ürün verilerinde ürün garantisi ve müşteri desteğiyle ilgili bilgi bulunmamaktadır. Lütfen ürün ambalajına veya üreticinin resmi sayfasına bakın. website for detailed warranty terms and contact information for technical support.