giriiş
This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter MP3000 90 MP Rotator sprinkler heads. Proper use and care will ensure efficient and long-lasting performance of your irrigation system. Please read this manual thoroughly before proceeding with installation or operation.
Güvenlik Bilgileri
- Always turn off the water supply before installing or performing maintenance on sprinkler heads.
- Montaj sırasında eldiven ve göz koruması gibi uygun güvenlik ekipmanlarını kullanın.
- Sızıntıları ve su israfını önlemek için tüm bağlantıların güvenli olduğundan emin olun.
- Boğulma tehlikesini önlemek için küçük parçaları çocuklardan uzak tutun.
Kurulum ve Yükleme
The Hunter MP3000 90 MP Rotator is designed for easy installation into standard sprinkler bodies. Follow these steps for proper setup:
- Püskürtme başlığının gövdesini hazırlayın: Ensure the sprinkler body is free of debris and the internal filter screen is clean.
- Insert the MP Rotator: Carefully thread the MP3000 90 nozzle onto the riser of the sprinkler body. Hand-tighten only. Do not overtighten, as this can damage the nozzle or body.
- Konumlandırma: Ensure the sprinkler body is installed flush with the ground level to prevent damage from lawn equipment.
- Su Temini: Turn on the water supply slowly to check for leaks.
Operating Instructions and Adjustment
The MP3000 90 MP Rotator features an adjustable arc from 90° to 210° and a radius of 22 to 30 feet. Adjustments should be made while the water is running to observe the spray pattern.
- Arc Adjustment: To adjust the arc, hold the top of the nozzle and rotate the outer ring. The arc can be set between 90 and 210 degrees.
- Radius Adjustment: The radius can be reduced by up to 25% using a specialized MP adjustment tool (not included). Insert the tool into the top of the nozzle and turn clockwise to decrease the radius, or counter-clockwise to increase it. Do not force the adjustment beyond its limits.
- Pattern Alignment: Ensure the fixed left edge of the spray pattern is correctly aligned with the desired coverage area.
Bakım
Regular maintenance ensures optimal performance and longevity of your MP Rotator sprinkler heads.
- Filtre Ekranı Temizliği: Periodically remove the nozzle and clean the internal filter screen to prevent clogging. Rinse under running water.
- Enkaz temizleme: Inspect the nozzle for any debris that may obstruct the spray pattern. Carefully remove any blockages.
- Kışlama: In freezing climates, ensure your irrigation system is properly winterized to prevent damage to the sprinkler heads and pipes. Consult a local irrigation professional if unsure.
Sorun giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Su yok veya düşük akış | Clogged filter screen or nozzle; insufficient water pressure. | Clean filter screen and nozzle. Check main water supply and system pressure. |
| Düzensiz püskürtme deseni | Debris in nozzle; incorrect arc/radius adjustment. | Clean nozzle. Re-adjust arc and radius settings. |
| Leaks at the base of the nozzle | Nozzle not tightened properly; damaged O-ring or sprinkler body. | Hand-tighten the nozzle. Inspect and replace O-ring or sprinkler body if damaged. |
Özellikler
- Modeli: Hunter MP3000 90 MP Rotator
- Malzeme: Plastik
- Stil: Döner
- Ayarlanabilir Açı: 90° - 210°
- Yarıçap: 22 - 30 fit
- Maksimum Basınç: 40 PSI (İnç Kare başına Pound)
- Maksimum Akış Hızı: 0.4 LPM (Dakikada Litre)
- Ürün Ağırlığı: 1.76 ounces (per nozzle)
- UPC: 011698357192
Garanti ve Destek
For specific warranty information and technical support, please refer to the official Hunter Industries webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Garanti talepleriniz için satın alma fişinizi saklayın.
İletişim Bilgileri: Lütfen ziyaret edin www.hunterindustries.com En son destek kaynakları ve iletişim bilgileri için.
