Kılavuzlar+

Custom Dynamics PB-575-B

Custom Dynamics ProBEAM 5 3/4" LED Headlamp Kullanım Kılavuzu

Model: PB-575-B

giriiş

This manual provides detailed instructions for the installation, operation, and maintenance of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp, model PB-575-B. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Custom Dynamics ProBEAM 5 3/4 inch LED Headlamp, ön view

Şekil 1: Ön view of the Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B). This image shows the clear lens, the upper LED light bars, and the lower projector-style LED elements, along with the Custom Dynamics logo at the bottom.

Güvenlik Bilgileri

Her zaman aşağıdaki güvenlik önlemlerine uyun:

  • Herhangi bir elektrik işlemi yapmadan önce aracın aküsünü ayırın.
  • Kısa devreleri önlemek için tüm bağlantıların güvenli ve uygun şekilde yalıtıldığından emin olun.
  • Kurulum adımlarından herhangi biri konusunda emin değilseniz, yetkili bir teknisyene danışın.
  • Do not modify the headlamp in any way, as this may void the warranty and compromise safety.
  • Kurulum sırasında uygun kişisel koruyucu ekipman (KKD) giyin.

Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

  • 1x Custom Dynamics ProBEAM 5 3/4" LED Headlamp (PB-575-B)
  • 1x Wiring Harness (if applicable, check product packaging)
  • 1x Kullanım Kılavuzu (bu belge)

Kurulum ve Yükleme

  1. Hazırlık: Park the vehicle on a level surface and turn off the ignition. Disconnect the negative terminal of the vehicle's battery.
  2. Remove Existing Headlamp: Carefully remove the bezel or retaining ring securing the existing 5 3/4" headlamp. Disconnect the wiring harness from the old headlamp.
  3. Install ProBEAM Headlamp: Connect the wiring harness of the ProBEAM LED headlamp to the vehicle's headlamp connector. Ensure the connection is secure.
  4. Secure Headlamp: Place the ProBEAM LED headlamp into the headlamp bucket. Reinstall the retaining ring or bezel to secure the headlamp yerinde.
  5. Pili Yeniden Bağlayın: Aracın aküsünün negatif kutbunu tekrar bağlayın.
  6. Test İşlevselliği: Turn on the vehicle's ignition and test the headlamp's low beam, high beam, and any integrated auxiliary functions (e.g., daytime running lights, if applicable).
  7. Hedef: Başlığı ayarlayınamp aim according to local regulations and for optimal visibility without blinding oncoming traffic. Refer to your vehicle's service manual for specific aiming procedures.

Note: Specific installation steps may vary depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions on removing and installing headlamps.

Kullanım Talimatları

The Custom Dynamics ProBEAM LED Headlamp operates in conjunction with your vehicle's existing headlamp switch. It features both low beam and high beam functions.

  • Düşük Huzme: Activate your vehicle's low beam setting for standard illumination.
  • Yüksek ışın: Activate your vehicle's high beam setting for increased illumination when conditions permit.

The LED technology provides instant-on illumination and a crisp, clear light output. No special operating procedures are required beyond standard vehicle headlamp operasyon.

Bakım

The Custom Dynamics ProBEAM LED Headlamp is designed for long-lasting performance with minimal maintenance.

  • Temizlik: Başlığı temizleyinamp lens with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the lens.
  • Denetleme: Başlığı periyodik olarak inceleyinamp for any signs of damage, loose connections, or moisture ingress.
  • Ampul Değişimi: The LED elements are designed to last the lifetime of the product and are not user-replaceable. If the headlamp malfunctions, contact Custom Dynamics support.

Sorun giderme

SorunOlası NedenÇözüm
kafaamp aydınlatmıyor
  • Gevşek veya yanlış kablo bağlantısı
  • Sigorta atmış
  • Faulty vehicle headlamp anahtar
  • Damaged headlamp birim
  • Check all wiring connections and ensure they are secure.
  • Inspect and replace the vehicle's headlamp fuse if blown.
  • Test the vehicle's headlamp anahtar.
  • Contact Custom Dynamics support for further assistance.
kafaamp titriyor veya loş
  • Zayıf elektrik bağlantısı
  • Yetersiz güç kaynağı
  • Cilttage dalgalanmalar
  • Verify all connections are clean and tight.
  • Aracın elektrik sisteminin yeterli voltaj sağladığından emin olun.tage.
  • Consult a qualified technician to diagnose electrical system issues.
Merceğin içindeki nem
  • Seal integrity compromised
  • Condensation (minor fogging is normal and should dissipate)
  • If significant moisture or water is present, contact Custom Dynamics support.
  • Allow minor condensation to dissipate naturally.

Özellikler

ÖzellikDetay
Model NumarasıPB-575-B
kafaamp Boyut5 3/4 inç
Işık kaynağıNEDEN OLMUŞ
RenkBlack (housing), Clear (lens)
Lens MalzemesiPolikarbonat
Özel ÖzellikHigh Beam functionality
Ürün Ağırlığı2.25 pound
UPC644978545677

Garanti ve Destek

For warranty information, technical support, or replacement parts, please contact Custom Dynamics directly. Refer to the official Custom Dynamics website for the most current warranty policy and contact details.

Custom Dynamics Contact Information:

  • Webalan: www.customdynamics.com
  • Phone: Refer to webGüncel iletişim numaraları için siteyi ziyaret edin.
  • Email: Refer to webGüncel iletişim e-postası için site.

İlgili Belgeler - PB-575-B

Önview Custom Dynamics ProBEAM 7" Adaptif LED Faramp Kurulum Talimatları
Custom Dynamics ProBEAM 7" Adaptif LED Far için adım adım kurulum kılavuzuamp (Parça Numaraları PB-7A14-B, PB-7A14-C) Harley-Davidson motosikletleri için. Montaj bilgileri ve kablo şemaları içerir.
Önview Custom Dynamics Road Glide Shark Demon LED Headlight Installation Instructions
Detailed step-by-step installation guide for the Custom Dynamics Road Glide Shark Demon LED Headlight (Model SD-RG-WW) on Harley-Davidson Road Glide motorcycles. Includes package contents, compatibility, and safety information.
Önview ProBEAM® Sequential Saddlebag LED Lights Installation Instructions
Detailed installation guide for Custom Dynamics ProBEAM® Sequential Saddlebag LED Lights, covering package contents, vehicle fitment, safety precautions, and step-by-step assembly instructions for Harley-Davidson Touring models.
Önview Özel Dynamics Smart Triple Play Kurulum Kılavuzu - CD-TPU-SS-SS6
Custom Dynamics Smart Triple Play modülü (CD-TPU-SS-SS6) için ayrıntılı kurulum talimatları. Bu yük dengeleme modülünü motosikletinizin arka aydınlatma sistemine güvenli ve doğru bir şekilde nasıl kuracağınızı öğrenin.
Önview Custom Dynamics Magic Strobes Brake Flasher Installation Instructions
Detailed installation instructions for the Custom Dynamics Magic Strobes Brake Light Flasher (models MAGIC-STROBE-ISN and MAGIC-STROBE-ISP) for compatible Indian motorcycle models. Learn how to enhance brake light visibility with various strobe patterns.
Önview Custom Dynamics Magic Strobes Brake Flasher Installation Guide & Wiring Diagram
Detailed installation instructions and wiring guide for the Custom Dynamics Magic Strobes Brake Flasher (Part Number: MAGIC-STROBES-UNV). Learn how to install, select patterns, and troubleshoot.