1. Giriş
This manual provides essential information for the safe and efficient operation of your APC by Schneider Electric Smart-UPS SMX2200RMLVUS. This Uninterruptible Power Supply (UPS) is designed to provide intelligent and efficient network power protection, making it ideal for supporting critical equipment such as servers, point-of-sale devices, routers, switches, and hubs.
Figure 1: APC Smart-UPS SMX2200RMLVUS 2.2kVA Tower/Rack Mountable UPS. This image displays the front view of the black UPS unit, featuring a perforated grille on the left and a digital display with control buttons on the right. Rack-mounting ears are visible on both sides.
2. Kurulum ve Kurulum
Follow these steps to properly set up your UPS unit:
- Paketin açılması: Carefully remove the UPS and all accessories from the packaging. Inspect for any shipping damage.
- Atama: Position the UPS in a clean, dry, and temperature-controlled environment. Ensure adequate airflow around the unit. This model is designed for both tower and rack-mountable configurations.
- Pil Bağlantısı: Connect the internal battery pack. Refer to the quick-start guide for specific instructions on connecting the battery terminals, as this may vary by unit.
- External Battery Packs (Optional): If using external battery packs, ensure they are properly connected. The UPS features auto-recognition of external batteries, automatically adjusting runtime calculations.
- Şebeke Gücüne Bağlan: Plug the UPS power cord into a grounded 120 Volt AC outlet. Avoid using extension cords.
- Ekipmanı Bağlayın: Plug your critical equipment (servers, networking devices, etc.) into the output receptacles on the rear of the UPS. Ensure the total load does not exceed the UPS capacity.
- Başlangıç ücreti: Allow the UPS to charge for at least 24 hours before connecting any critical loads to ensure full battery capacity.
3. Operasyon
Understanding the operational features of your Smart-UPS is crucial for optimal performance.
- Güç Açma/Kapatma: Use the power button on the front panel to turn the UPS on or off.
- Sesli Alarmlar: The UPS provides audible alarms to notify you of changing utility power and UPS power conditions, such as battery mode, low battery, or overload. Consult the display for detailed information.
- Otomatik Sestage Yönetmelik (AVR): The Boost and Trim AVR feature corrects low and high voltage conditions without using battery power, extending battery life and ensuring stable power to connected equipment.
- Soğuk Çalıştırma Özelliği: In the event of a complete utility power outage, the UPS can provide temporary battery power to connected equipment, allowing for a graceful shutdown or brief operation.
- Ayarlanabilir Hacimtage Hassasiyet: This feature allows you to adapt the UPS for optimal performance in specific power environments or when operating with a generator.
- Ayarlanabilir Hacimtage-Transfer Points: You can maximize useful battery life by widening the input voltage pencere veya çıkış hacminin sıkılmasıtage regulation, depending on your power quality needs.
- Otomatik Yeniden Başlatma: The UPS automatically starts up connected equipment upon the return of utility power after a shutdown.
4. Bakım
Regular maintenance ensures the longevity and reliability of your UPS.
- Otomatik Otomatik Test: Kesintisiz güç kaynağı (UPS), değiştirilmesi gereken bir pili erken tespit etmek için periyodik olarak pil kendi kendine testleri gerçekleştirir.
- Battery Failure Notification: The system provides early-warning fault analysis on batteries, enabling timely preventive maintenance and replacement.
- Pil Bağlantısının Kesilmesi Bildirimi: The UPS will warn you if a battery is not available to provide backup power, indicating a potential connection issue or a severely depleted battery.
- Pil Değişimi: When the battery requires replacement, follow the instructions provided with the replacement battery kit. Always use genuine APC replacement batteries.
5. Sorun Giderme
Bu bölümde UPS'inizde karşılaşabileceğiniz yaygın sorunlara yönelik çözümler sunulmaktadır.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| UPS açılmıyor. | Battery not connected or discharged; No utility power. | Ensure battery is properly connected. Plug UPS into a live utility outlet and allow to charge. |
| UPS sürekli veya sık sık bip sesi çıkarıyor. | Operating on battery; Low battery; Overload condition. | Check utility power. Allow battery to charge. Reduce connected load. |
| Battery failure notification | Battery nearing end of life or faulty. | Pili değiştirin. |
| Disconnected battery notification | Internal or external battery connection issue. | Verify all battery connections are secure. |
For more detailed troubleshooting, refer to the full product documentation or contact APC customer support.
6. Özellikler
Key technical specifications for the APC Smart-UPS SMX2200RMLVUS:
- Model Numarası: SMX2200RMLVUS
- Marka: Schneider Electric tarafından APC
- Ürün Ölçüleri: 26.3"D x 17"G x 3.3"Y (66.8 cm D x 43.2 cm G x 8.4 cm Y)
- Ürün Ağırlığı: 84.8 pound (38.5 kg)
- Cilttage: 120 Volt
- Pil Hücresi Kompozisyonu: Kurşun Asit
- Renk: Siyah
7. Garanti ve Destek
For warranty information, technical support, or to purchase replacement parts, please visit the official APC by Schneider Electric websitesine bakın veya müşteri hizmetleri departmanıyla iletişime geçin.
Daha fazla bilgi ve destek kaynağına ulaşmak için şu adresi ziyaret edebilirsiniz: APC by Schneider Electric Store on Amazon.
