TC Electronic Ditto JAM X2 Looper Pedal Kullanım Kılavuzu

giriiş

Welcome to the user manual for the TC Electronic Ditto JAM X2 Looper Pedal. This intuitive looper pedal is designed for musicians seeking intelligent loop synchronization that responds to their band's rhythm. It features innovative BeatSense technology, allowing for automatic adjustment of loop tracks to your beat, and offers both Record-then-Play and Record-then-Overdub functionalities with unlimited overdubs and undo/redo capabilities. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Ditto JAM X2 Looper.

Resim: Ön view of the TC Electronic Ditto JAM X2 Looper Pedal, showcasing the 'LOOP LEVEL' knob, 'REC-DUB-PLAY' and 'REC-PLAY-DUB' switches, 'LOOP' and 'STOP' footswitches, and 'BEAT SENSE' indicator.

Temel Özellikler

• Intuitive looper pedal with intelligent loop synchronization that responds to your band.
• Innovative responsive BeatSense technology automatically adjusts loop tracks to your beat.
• Choose between Record-then-Play or Record-then-Overdub functionalities.
• Unlimited overdubs and undo/redo for total creative freedom.
• Dual built-in mics accurately track band tempo by focusing only on rhythmic elements.

Resim: Yakın çekim view of the "BEAT SENSE" indicator on the pedal, highlighting its function.

Image: An external microphone, likely used for the BeatSense technology, clipped onto a drum kit component.

Kurmak

Güç Kaynağı

The Ditto JAM X2 Looper requires a 9V power supply. Ensure you use a compatible power adapter (not included) to power the unit.

Bağlantılar

• Enstrümanınızı (örneğin gitarınızı) şuraya bağlayın: GİRİŞ Standart 1/4 inçlik enstrüman kablosu kullanarak jakı bağlayın.
• Bağlan ÇIKTI senin için kriko amplifier or next pedal in the signal chain using a standard 1/4-inch instrument cable.
• An HARİCİ MİKROFON input is available for connecting an external microphone to enhance BeatSense accuracy, particularly in complex rhythmic environments.

Resim: Arka view of the Ditto JAM X2 pedal, clearly showing the INPUT, OUTPUT, EXT MIC jacks, and the power input.

Kullanım Talimatları

Temel Döngü

• Kayıt: Basın DÖNGÜ footswitch once to start recording your loop. The LED will illuminate red.
• Playback/Overdub: Basın DÖNGÜ footswitch again to stop recording and begin playback. If you press it again during playback, you will start overdubbing.
• Durdur: Basın DURMAK footswitch once to stop playback.
• Geri al/Yinele: Basılı tutun DURMAK footswitch to undo the last overdub. Press and hold again to redo it.
• Döngüyü Temizle: Basılı tutun DÖNGÜ footswitch to clear the current loop.

Loop Level Control

The DÖNGÜ SEVİYESİ knob adjusts the overall volume of your recorded loop. Turn clockwise to increase volume, counter-clockwise to decrease.

Record Modes (REC-DUB-PLAY / REC-PLAY-DUB)

The Ditto JAM X2 offers two recording modes, selectable via the small toggle switch:

• REC-DUB-PLAY: In this mode, the first press of the LOOP footswitch records, the second press starts overdubbing, and a third press initiates playback without further overdubbing.
• REC-PLAY-DUB: In this mode, the first press records, the second press starts playback, and a third press initiates overdubbing.

Resim: Ayrıntılı view of the toggle switch for selecting between REC-DUB-PLAY and REC-PLAY-DUB modes.

BeatSense Technology

The innovative BeatSense technology uses dual built-in microphones to listen to your band's rhythmic elements (like drums) and automatically synchronize your loops to the detected tempo. This ensures your loops stay perfectly in time with the rest of the band.

Image: A musician's feet operating the Ditto JAM X2 pedal on a stage floor, demonstrating its use in a live setting.

Bakım

• Pedalı temiz tutun ve tozdan ve kirden arındırın. Temizlik için yumuşak, kuru bir bez kullanın.
• Pedalları aşırı sıcaklıklara, neme veya doğrudan güneş ışığına maruz bırakmaktan kaçının.
• Do not attempt to open the unit or perform repairs yourself, as this will void the warranty. Refer to qualified service personnel for any issues.
• Ensure proper ventilation around the pedal during use.

Image: The bottom label of the Ditto JAM X2 pedal, displaying compliance information, manufacturer details, and power requirements.

Sorun giderme

Ses Çıkışı Yok

• Tüm kablo bağlantılarını (giriş, çıkış, güç) kontrol edin.
• Ensure the pedal is receiving power.
• Verify the LOOP LEVEL knob is not set to minimum.
• Farklı kablolarla test edin ve amplifier/instrument to isolate the issue.

Loop Not Synchronizing

• Ensure the BeatSense microphones are not obstructed.
• Verify the external microphone (if used) is properly connected and functioning.
• The BeatSense technology works best with clear, consistent rhythmic input (e.g., drums). Complex or irregular rhythms may affect synchronization accuracy.
• Ensure the pedal is placed in an optimal position to pick up rhythmic sounds from the band.

Footswitches Not Responding

• Güç kaynağını kontrol edin.
• Sorun devam ederse müşteri desteği ile iletişime geçin.

Özellikler

Garanti ve Destek

For warranty information and technical support, please refer to the official TC Electronic webSite üzerinden satın alabilir veya doğrudan müşteri hizmetleriyle iletişime geçebilirsiniz. Satın alma belgenizi garanti talepleriniz için saklayın.

Çevrimiçi Kaynaklar: Ziyaret edin TC Electronic Store on Amazon Ek ürün bilgisi ve kaynakları için.