Ving A3 Boyutunda 3D Süblimasyon Vakum Makinesi Filmi ST-3042 Kullanım Kılavuzu

1. Giriş

This manual provides essential instructions for the proper use, setup, operation, and maintenance of the Ving A3 Size 3D Sublimation Vacuum Machine Film. Adhering to these guidelines will help ensure optimal performance and longevity of the product when used with compatible sublimation vacuum machines, specifically the ST-3042 model.

2. Ürün Bittiview

The Ving A3 Size 3D Sublimation Vacuum Machine Film is a specialized accessory designed for use in 3D sublimation processes. It is engineered to withstand high temperatures and facilitate efficient heat transfer during sublimation.

• Malzeme: Heat-resistant silicon film
• Boyut: 30x42cm (A3 equivalent)
• Ağırlık: Yaklaşık 0.2kg
• Renk: Beyaz
• Uyumluluk: Specifically designed for the ST-3042 3D Sublimation Vacuum Machine. Also compatible with models HTM-AHP-3D and HTM-AHP-3D-S.

Figure 2.1: An image showing the Ving A3 Size 3D Sublimation Vacuum Machine Film, a rectangular, heat-resistant silicone sheet in white.

3. Kurulum

Before using the sublimation film, ensure your ST-3042 3D Sublimation Vacuum Machine is properly set up and calibrated according to its own instruction manual. The film itself does not require complex setup, but proper placement is crucial.

1. Inspect the Film: Before each use, visually inspect the silicon film for any tears, punctures, or significant damage. A damaged film may lead to poor sublimation results or machine malfunction.
2. Clean the Film: Ensure the film surface is clean and free of dust, debris, or residue. Use a soft, lint-free cloth if cleaning is necessary.
3. Prepare the Substrate: Prepare the item (substrate) to be sublimated according to its specific instructions.
4. Filmi şu şekilde konumlandırın: Carefully place the silicon film over the substrate and sublimation transfer paper within the ST-3042 machine's vacuum chamber. Ensure it covers the entire area to be sublimated and forms a tight seal when vacuum is applied.

4. Kullanım Talimatları

The Ving A3 Size 3D Sublimation Vacuum Machine Film works in conjunction with your ST-3042 machine to create a vacuum seal and apply even pressure and heat during the sublimation process.

1. Load Substrate: Place the prepared substrate with the sublimation transfer paper (image side down) into the ST-3042 machine.
2. Apply Film: Position the Ving silicon film over the substrate, ensuring it completely covers the item and the edges are within the vacuum sealing area of the machine.
3. Close Machine: Close the lid of the ST-3042 machine securely.
4. Vakumu Etkinleştir: Initiate the vacuum function on your ST-3042 machine. The film will conform tightly to the shape of the substrate, removing air and ensuring even contact.
5. Isıtmaya Başla: Begin the heating cycle according to the recommended temperature and time settings for your specific substrate and sublimation ink.
6. Tamamlama: Once the sublimation cycle is complete, turn off the heat and vacuum. Carefully open the machine and remove the film.
7. Sakin ol: Allow the sublimated item to cool down before handling or removing the transfer paper.

Not: Always refer to the ST-3042 machine's instruction manual for specific operational parameters, safety precautions, and detailed steps.

5. Bakım

Proper maintenance of the Ving A3 Size 3D Sublimation Vacuum Machine Film will extend its lifespan and ensure consistent results.

• Temizlik: After each use, allow the film to cool completely. Gently wipe the film surface with a soft, damp cloth to remove any ink residue or debris. Avoid abrasive cleaners or sharp objects that could damage the silicon.
• Depolamak: Store the film flat or rolled loosely in a clean, dry, and cool environment, away from direct sunlight and extreme temperatures. Avoid folding or creasing the film, as this can cause permanent damage.
• Denetleme: Regularly inspect the film for signs of wear, such as cracks, tears, or excessive discoloration. Replace the film if significant damage is observed, as it may compromise the vacuum seal and sublimation quality.

6. Sorun Giderme

This section addresses common issues that may arise when using the sublimation film.

For issues not covered here, please consult the ST-3042 machine's manual or contact customer support.

7. Özellikler

• Ürün Adı: A3 Size 3D Sublimation Vacuum Machine Film
• Marka: Ving
• Malzeme: Heat-resistant silicon film
• Boyutlar: 30 cm x 42 cm (approximately 11.8 inches x 16.5 inches)
• Ağırlık: 0.2 kg (yaklaşık 0.44 lbs)
• Renk: Beyaz
• Uyumlu Modeller: ST-3042, HTM-AHP-3D, HTM-AHP-3D-S
• Üretici: Sign-in-China

8. Garanti ve Destek

Specific warranty information for the Ving A3 Size 3D Sublimation Vacuum Machine Film is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact your original point of purchase or the manufacturer, Sign-in-China.

When contacting support, please have your product model (ST-3042 Film) and purchase information readily available.