Audibax Orlando 162 Plus PAR Lambası Kullanım Kılavuzu

1. Giriş

The Audibax Orlando 162 Plus is a professional PAR light designed for various lighting applications. It features 54 x 3W RGB 3-in-1 LEDs, offering a wide range of color mixing capabilities. This device supports DMX control, automatic programs, sound-activated modes, and master/slave operation, making it suitable for stage lighting, events, and architectural illumination. This manual provides essential information for safe operation, setup, and maintenance.

2. Güvenlik Bilgileri

• Elektriksel Güvenlik: Always connect the device to a grounded power outlet. Ensure the voltage matches the device's requirements (AC90-240V, 50/60Hz). Disconnect power before cleaning or servicing.
• Atama: Install the fixture in a well-ventilated area, away from heat sources and flammable materials. Ensure stable mounting to prevent accidental falls.
• İşleme: Avoid direct eye exposure to the light source. Do not operate the device if the power cord is damaged. Do not attempt to repair the device yourself; refer servicing to qualified personnel.
• Çevre: This device is intended for indoor use only. Protect it from moisture and extreme temperatures.

3. Paket İçeriği

Paketleri açtığınızda tüm eşyaların mevcut olduğundan emin olun:

• Audibax Orlando 162 Plus PAR Light
• Montaj Braketi
• Güç kablosu
• Kullanıcı Kılavuzu

4. Ürün Bittiview

The Audibax Orlando 162 Plus features a robust aluminum housing and an adjustable mounting bracket for versatile positioning.

Şekil 4.1: Ön view of the Audibax Orlando 162 Plus PAR light, showcasing the 54 RGB LEDs illuminated in green.

Şekil 4.2: Yan view of the PAR light, illustrating the adjustable mounting bracket for flexible installation.

Kontrol Paneli ve Bağlantılar

The rear panel provides access to the control interface and input/output connections.

Şekil 4.3: Arka view of the PAR light, detailing the DMX IN/OUT ports, power input, digital display, and control buttons (MENU, UP, DOWN, ENTER).

• Dijital gösterge: Shows current mode and parameter settings.
• MENÜ Düğmesi: Navigates through the main menu options.
• YUKARI/AŞAĞI Düğmeleri: Adjust parameter values or navigate menu items.
• GİRİŞ Düğmesi: Seçimleri onaylar.
• DMX GİRİŞ/ÇIKIŞ: 3-pin XLR connectors for DMX signal connection.
• GÜÇ GİRİŞİ: IEC power input for connecting the power cable.

5. Kurulum

5.1 Montaj

1. Attach the mounting bracket securely to the fixture using the provided screws.
2. Mount the fixture to a truss, ceiling, or stand using appropriate clamps and safety cables (not included). Ensure the mounting surface can support the weight of the fixture.
3. Adjust the angle of the fixture using the bracket's locking knobs.

5.2 Güç Bağlantısı

1. Connect the supplied power cable to the POWER IN socket on the rear of the fixture.
2. Plug the other end of the power cable into a suitable grounded power outlet.

5.3 DMX Bağlantısı (İsteğe Bağlı)

For DMX control, connect a DMX controller to the DMX IN port of the first fixture. Use DMX OUT to connect to the DMX IN of the next fixture in a daisy chain configuration.

• Use standard 3-pin XLR DMX cables.
• Ensure the DMX chain is terminated with a 120-ohm resistor at the last fixture for optimal signal integrity.

6. Kullanım Talimatları

Use the MENU, UP, DOWN, and ENTER buttons on the rear panel to navigate and select operating modes and parameters.

6.1 Menü Navigasyonu

• Basmak MENÜ to cycle through the main menu options (e.g., DMX Address, Auto Mode, Sound Mode, Master/Slave).
• Kullanmak UP Ve AŞAĞI to adjust values or select sub-options within a menu.
• Basmak GİRMEK to confirm your selection or save changes.

6.2 Çalışma Modları

The Orlando 162 Plus offers several operational modes:

• DMX Modu: Allows external control via a DMX controller. Set the DMX address using the menu. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific control functions.
• Otomatik mod: The fixture runs through pre-programmed light shows automatically. Various auto programs may be available; use UP/DOWN to select.
• Sesle Etkinleştirilen Mod: The light patterns and changes respond to ambient sound detected by the built-in microphone. Adjust sensitivity if available.
• Master/Slave Modu: Connect multiple Orlando 162 Plus fixtures. Set one unit as 'Master' and others as 'Slave'. The slave units will synchronize their operation with the master unit.
• Statik Renk Modu: Select a fixed color. The 3-in-1 RGB LEDs allow for a wide spectrum of colors.
• Strobe Fonksiyonu: Activates a flashing light effect. This can often be adjusted for speed.

6.3 Color Examples

7. Bakım

• Temizlik: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and unplugged before cleaning.
• Denetleme: Periodically check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
• Depolamak: Kullanılmadığı zamanlarda, armatürü kuru ve tozsuz bir ortamda saklayın.

8. Sorun Giderme

9. Özellikler

10. Garanti ve Destek

Audibax products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact Audibax customer support. For technical assistance or service inquiries, please visit the official Audibax websitesine bakın veya yerel satıcınıza başvurun.