Littelfuse FLNR045

Kullanım Kılavuzu

Littelfuse FLNR045 FUS 250V T/D Class RK5 45A

1. Giriş

This manual provides essential information for the safe and effective use of the Littelfuse FLNR045 FUS 250V T/D Class RK5 45A fuse. Please read this manual thoroughly before installation or operation and retain it for future reference. This fuse is designed for use in panel accessories and electrical systems requiring reliable overcurrent protection.

2. Güvenlik Bilgileri

UYARI: Electrical shock hazard. Improper installation or use of this product can result in serious injury or death. Always follow local electrical codes and safety regulations.

3. Ürün Açıklaması ve Özellikleri

The Littelfuse FLNR045 is a 45 Amp, 250 Volt, Class RK5, dual-element, time-delay fuse. It is designed to provide superior protection for motors and other inductive loads against both overloads and short-circuits. Its time-delay characteristic allows for temporary inrush currents without nuisance opening, while still providing fast-acting protection under short-circuit conditions.

Littelfuse FLNR045 Class RK5 Time-Delay Fuse

Figure 3.1: A Littelfuse FLNR045 Class RK5 time-delay fuse. This image shows the cylindrical body of the fuse with the Littelfuse brand and "CLASS RK5 Time Delay Dual Element" visible on its label.

Temel Özellikler:

4. Kurulum ve Kurulum

Installation of the FLNR045 fuse should only be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

  1. Devrenin enerjisini kesin: Before beginning any work, ensure that the circuit where the fuse is to be installed or replaced is completely de-energized. Verify with a voltage test cihazı.
  2. Sigorta yuvasını belirleyin: Locate the appropriate fuse holder or disconnect switch for the circuit requiring protection.
  3. Insert Fuse: Carefully insert the FLNR045 fuse into the fuse clips or holder, ensuring a secure and proper connection. Do not force the fuse.
  4. Kurulumu Doğrulayın: Double-check that the fuse is seated correctly and that all connections are tight.
  5. Devreyi Yeniden Enerjilendirin: Kurulum tamamlanıp doğrulandıktan sonra devreye tekrar güç verin.

It is critical to match the fuse's voltagve amperage ratings to the circuit's requirements. Using a fuse with an incorrect rating can lead to system failure or hazardous conditions.

5. Çalışma Prensipleri

The Littelfuse FLNR045 is a current-limiting, time-delay fuse. This means it is designed to:

The time-delay feature is particularly beneficial in circuits with inductive loads that draw high inrush currents upon startup, preventing unnecessary fuse blows and ensuring continuous operation.

6. Bakım

Fuses are generally maintenance-free components. However, periodic inspection of the fuse and its holder is recommended as part of routine electrical system maintenance.

7. Sorun Giderme

If a circuit protected by the FLNR045 fuse loses power, the fuse may have blown due to an overcurrent condition. Follow these steps:

  1. Devrenin enerjisini kesin: Immediately disconnect power to the affected circuit at the main panel.
  2. Atmış Sigortayı Belirleyin: Carefully remove the fuse (using appropriate tools if necessary) and test it with a multimeter for continuity. A blown fuse will show an open circuit (no continuity).
  3. Nedeni araştırın: Before replacing the fuse, identify and rectify the cause of the overcurrent. Common causes include:
    • Short-circuit in wiring or equipment.
    • Overloaded circuit (too many devices drawing power).
    • Faulty appliance or motor.
  4. Sigortayı Değiştirin: Once the fault is cleared, replace the blown fuse with a new Littelfuse FLNR045 fuse. Ensure the replacement fuse has the exact same ratings.
  5. Re-energize and Monitor: Restore power and monitor the circuit for proper operation. If the new fuse blows immediately, there is still an unresolved issue in the circuit that requires professional attention.

Do not repeatedly replace fuses without addressing the underlying problem, as this can lead to serious electrical hazards.

8. Özellikler

ŞartnameDeğer
Model NumarasıFLNR045
MarkaKüçük sigorta
Cilttage Derecelendirme250 Volt AC
AmpDerecelendirme45 Amps
Sigorta SınıfıRK5
ÖzellikTime-Delay, Dual-Element
MalzemeStone (Insulating Body)
UyumlulukUL Listeli
KategoriPanel Accessories, Fuse

9. Garanti ve Destek

For information regarding warranty, technical support, or service for your Littelfuse FLNR045 fuse, please contact Littelfuse directly through their official webSite veya müşteri hizmetleri kanalları aracılığıyla. Garanti talepleriniz için satın alma fişinizi saklayın.

Littelfuse Official Webalan: www.litelfuse.com

İlgili Belgeler - FLNR045

Önview Littelfuse JLLN Serisi Sınıf T Sigortalar | Hızlı Etkili, Yüksek Kesme Kapasiteli
Kompakt tasarım, hızlı etkili aşırı yük ve kısa devre koruması ve 200,000 AIR'e kadar yüksek kesme değerleri sunan Littelfuse JLLN Serisi Sınıf T sigortalarını keşfedin. Sürücüler, invertörler ve güç kaynakları için idealdir. View teknik özellikler, sipariş bilgileri ve boyutlar.
Önview Littelfuse P6SMB Serisi 600W Yüzeye Monte TVS Diyot Veri Sayfası
Littelfuse P6SMB Serisi 600W Yüzey Montajlı Geçici Voltaj Regülatörü Veri Sayfasıtage Bastırıcı (TVS) Diyotlar. Özellikleri, avantajları, elektriksel özellikleri, derecelendirmeleri, eğrileri, lehimleme parametrelerini, fiziksel ve çevresel özellikleri ve parça numaralandırma bilgilerini içerir.
Önview CT Turns Ratio Modification Guide: Littelfuse Technical Note
Learn how to modify the turns ratio of Littelfuse current transformers (CTs) with this technical note, including methods for adding and subtracting turns, and practical examples. Understand the principles of CT operation and ratio adjustments.
Önview PTS526 Series Microminiature SMT Top Actuated Tactile Switch Datasheet
Datasheet for the Littelfuse PTS526 Series microminiature SMT top-actuated tactile switch. Features a 5.2 x 5.2 mm footprint, variable heights, and multiple actuation forces, suitable for IoT, home automation, and remote control applications. Includes detailed specifications, mechanical characteristics, dimensions, and ordering information.
Önview Ground-Fault Monitoring in Adjustable-Speed Drive Applications | Littelfuse Technical Note
Technical note from Littelfuse on ground-fault monitoring for adjustable-speed drives (VFDs) using SE-700 and EL731 series relays. Covers issues, filtering, recommended settings, and current transformer location for resistance-grounded systems.
Önview Littelfuse 55505 Series Hall Effect Geartooth Speed Sensor Datasheet
Datasheet for the Littelfuse 55505 Series Hall Effect Flange Mount Geartooth Speed Sensor, detailing its features, applications, electrical ratings, and part numbering system for industrial, commercial, and automotive use.