SAWO ARI-GUARD-W3-A Aspen ARI3 Elektrikli Isıtıcılar için Ahşap Emniyet Rayları Kullanım Kılavuzu

1. Giriş

This manual provides instructions for the installation and maintenance of the SAWO ARI-GUARD-W3-A Aspen Wooden Safety Rail. This product is designed to provide a protective barrier around SAWO ARI3 series electric sauna heaters, preventing accidental contact and enhancing safety within the sauna environment. It is constructed from high-quality Aspen wood with a robust stainless steel frame.

2. Güvenlik Bilgileri

• Ensure the heater is completely cool and disconnected from power before installation or maintenance.
• This safety rail is intended for use with SAWO ARI3-NB and ARI3-NS electric heaters only. Do not attempt to install it on other heater models.
• Installation should be performed by a competent individual, following all local building codes and safety regulations.
• Do not modify the safety rail or its components. Use only original SAWO parts for replacement if necessary.
• Regularly inspect the safety rail for any signs of damage or wear. Replace damaged parts immediately.

3. Paket İçeriği

Kuruluma başlamadan önce tüm bileşenlerin mevcut olduğundan emin olun:

• 2 x Aspen Wood Rail Segments
• 1 x Stainless Steel Frame Assembly
• Montaj Donanımı (vidalar, braketler)
• Kullanım Kılavuzu (bu belge)

Figure 1: All components of the SAWO ARI-GUARD-W3-A Aspen Wooden Safety Rail, including the two wooden segments and the stainless steel frame.

4. Kurulum Talimatları

Follow these steps to properly install the safety rail around your SAWO ARI3 electric heater:

1. Isıtıcıyı hazırlayın: Ensure your SAWO ARI3 heater is securely installed according to its own instruction manual and is completely cool and disconnected from power.
2. Çerçeveyi Birleştirin: Connect the stainless steel frame segments around the heater. The frame is designed to fit snugly around the heater's body. Secure any connecting points with the provided screws.
3. Attach Wood Segments: Position the two Aspen wood rail segments onto the assembled stainless steel frame. The segments are designed to interlock or attach to specific points on the frame.
4. Secure the Rail: Use the provided mounting hardware to firmly attach the wood segments to the stainless steel frame. Ensure all connections are tight and stable.
5. Son Kontrol: Gently push and pull on the installed safety rail to confirm it is securely mounted and does not wobble. Verify that there are no sharp edges or loose parts.

Figure 2: SAWO ARI-GUARD-W3-A safety rail installed around an electric sauna heater, providing a protective barrier.

Şekil 3: Ayrıntılı view of the SAWO ARI-GUARD-W3-A safety rail, showing the wooden segments and stainless steel frame in place around the heater.

5. Bakım

• Temizlik: Ahşap yüzeyleri ad ile silin.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the wood finish.
• Denetleme: Periodically check all screws and connections to ensure they remain tight. Over time, wood may expand or contract due to temperature changes, potentially loosening fasteners.
• Ahşap Bakımı: If desired, the Aspen wood can be treated with a sauna-specific wood protector to maintain its appearance and extend its lifespan. Follow the protector manufacturer's instructions.

6. Özellikler

7. Garanti ve Destek

For warranty information or technical support, please refer to the documentation provided with your SAWO electric heater or visit the official SAWO website. Herhangi bir garanti talebi için satın alma belgeniz olarak satın alma makbuzunuzu saklayın.