Facmogu A18033 3-Way 200W Hi-Fi Speaker Crossover Filter

1. Giriş

This manual provides detailed instructions for the installation and use of the Facmogu A18033 3-Way 200W Hi-Fi Speaker Crossover Filter. This passive audio component is designed to separate audio signals into distinct frequency ranges (bass, midrange, and treble) for optimal sound reproduction through a multi-speaker system. Please read this manual thoroughly before installation to ensure correct setup and safe operation.

2. Güvenlik Bilgileri

Her zaman aşağıdaki güvenlik önlemlerine uyun:

• Ensure all power to the audio system is disconnected before installing or wiring the crossover filter.
• Incorrect wiring can damage your speakers, amplifier, or the crossover itself. Follow wiring diagrams carefully.
• Do not exceed the maximum power handling capacity of 200W.
• Cihazı nemden, aşırı sıcaklıklardan ve doğrudan güneş ışığından uzak tutun.
• Handle with care to avoid damaging electronic components.

3. Ürün Bittiview

The Facmogu A18033 is a passive 3-way crossover network. It features dedicated outputs for bass (woofer), midrange, and treble (tweeter) speakers, allowing each speaker to receive only the frequencies it is designed to reproduce efficiently. This results in clearer sound, improved dynamics, and reduced distortion.

Şekil 1: Üst view of the crossover board, illustrating the layout of components.

4. Özellikler

5. Kurulum ve Yükleme

Follow these steps for proper installation and wiring of the crossover filter:

1. Hazırlık: Sizin emin olun amplifier and speakers are disconnected from power. Gather necessary tools such as wire strippers, screwdrivers, and speaker wire.
2. Terminalleri Tanımlayın: The crossover board has clearly labeled terminals for input and outputs.
   • Giriş: Sizinle bağlantı kurar amplifier's output. Observe polarity (+ and -).
   • W (Woofer): Connects to your bass speaker (woofer).
   • M (Midrange): Connects to your midrange speaker.
   • T (Tweeter): Connects to your treble speaker (tweeter).
3. Kablo Bağlantıları:
   

   Şekil 2: Ayrıntılı view of the wiring terminals on the crossover board.

   Hoparlör kablolarını bilgisayarınızdan bağlayın. amplifier's output to the "Input" terminals on the crossover board. Pay close attention to positive (+) and negative (-) polarity. Then, connect the respective speaker wires from the "W", "M", and "T" terminals to your woofer, midrange, and tweeter speakers, maintaining correct polarity for each connection.

   Important: Always ensure positive (+) terminals are connected to positive (+) and negative (-) to negative (-) throughout your audio system to prevent phase issues and poor sound quality.

4. Montaj: Securely mount the crossover board within your speaker enclosure or desired location using appropriate fasteners. Ensure it is protected from vibrations and physical damage.
5. Test: Once all connections are made and secured, reconnect power to your amplifier and test the audio system at a low volume. Gradually increase the volume to verify proper sound reproduction from all speakers.

Şekil 3: Açısal view showing the overall component layout.

6. Kullanım Talimatları

The Facmogu A18033 is a passive crossover filter, meaning it does not require external power and operates by filtering the audio signal directly. Once correctly installed and wired, it functions automatically to direct the appropriate frequency ranges to each connected speaker. There are no user-adjustable settings on this device.

7. Bakım

This crossover filter requires minimal maintenance:

• Temizlik: Periodically clean the board with a soft, dry cloth to remove dust. Do not use liquid cleaners.
• Denetleme: Kabloların bağlantı noktalarının sağlam ve korozyondan arınmış olduğundan emin olmak için zaman zaman kontrol edin.
• Çevre: Ensure the crossover is installed in a dry, well-ventilated area, away from direct heat sources or excessive moisture.

8. Sorun Giderme

If you experience issues with your audio system after installing the crossover, consider the following:

• Hoparlörden Ses Gelmiyor:
  • Check all wiring connections for that specific speaker and its corresponding terminal on the crossover.
  • Ensure speaker wires are not broken or short-circuited.
  • Verify the speaker itself is functional by testing it with a known good source (if safe to do so).
• Bozuk veya Dengesiz Ses:
  • Double-check all positive (+) and negative (-) wiring polarities. Incorrect polarity can cause phase cancellation and poor sound.
  • Sağlamak ampAmplifikatör aşırı çalıştırılmıyor.
  • Verify that the speaker impedance matches the recommended range (4-8 Ohms).
• Aşırı Isınma:
  • If the crossover components feel excessively hot, it may indicate an impedance mismatch or that the power handling limit is being exceeded. Reduce volume or check your system's power output.
  • Ensure adequate ventilation around the crossover.

If problems persist, consult a professional audio technician.

9. Paket İçeriği

Paket şunları içerir:

• 1 x Facmogu A18033 3-Way Speaker Crossover Filter

10. Garanti ve Destek

Specific warranty information for the Facmogu A18033 is not provided in this manual. Please refer to the retailer or manufacturer's website for details regarding warranty coverage and customer support. Keep your purchase receipt as proof of purchase.

For technical assistance or inquiries, please contact Facmogu customer service through their official channels.