Ürün Bittiview
The TOPENS DKC1000 is an automatic sliding gate opener designed for heavy-duty slide gates weighing up to 1800 lbs and up to 40 ft in length. It features a 350W 1/2 HP DC motor, a smart PCB control board, and is suitable for outdoor use with its durable galvanized steel base plate and plastic ABS cover. It offers quiet operation and is compatible with battery power and solar charging systems.

Güvenlik Bilgileri
Read all instructions carefully before installation and use. Ensure all safety devices are properly installed and functioning. Keep children and pets away from the gate area during operation. In case of power outage) Kapıyı çalıştırmak için manuel açma anahtarını kullanın.
Paket İçeriği
The TOPENS DKC1000 kit typically includes:
- Kapı Açma Ünitesi
- 2 x M12 Uzaktan Kumanda
- Mıknatıs Montajı
- Manuel Serbest Bırakma Anahtarı
- 20 ft Chain (adjustable length)
- Rust-proof Mounting Hardware
- Kullanım Kılavuzu
(Note: Additional accessories like solar panels, batteries, keypads, and photo eyes are sold separately.)
Kurulum ve Yükleme
Proper installation is crucial for the safe and efficient operation of your gate opener.
Site Hazırlığı
- Ensure the gate slides smoothly and is properly aligned.
- Clear any obstructions along the gate's path.
- Prepare a stable, level concrete pad for mounting the opener unit.
Açıcının Montajı
Securely mount the gate opener unit to the concrete pad using the provided hardware. Ensure the unit is level and positioned correctly relative to the gate chain.

Zincir Kurulumu
Attach the chain to the gate and route it through the opener's sprocket. Adjust the chain tension to ensure it is taut but not overly tight. The chain length is adjustable.
Limit Switch Magnets
Install the limit switch magnets at the desired open and close positions of the gate. These magnets signal the opener to stop the gate's movement.
Kablolama
Connect the power supply (AC 100-120V or 2 x 12V batteries) to the control board. Follow the wiring diagram in the detailed manual for all connections, including optional accessories like photo eyes, keypads, and warning lights.

Kullanım Talimatları
Uzaktan Kumanda İşlemi
- Press the button on the remote control to open or close the gate.
- Çalışma esnasında butona tekrar basıldığında kapı duracaktır.
- The remote controls have an operation range of approximately 65 feet.
Manuel İşlem
In case of power failure or system malfunction, use the manual release key to disengage the motor and operate the gate manually.
Bakım
- Düzenli Temizlik: Keep the gate opener unit and the gate track clean from debris, leaves, and dirt to ensure smooth operation.
- Zincir Yağlama: Periodically lubricate the drive chain to prevent rust and reduce friction.
- Denetleme: Regularly inspect the gate, mounting hardware, and all connections for any signs of wear, damage, or loose components.
- Pil Kontrolü: If using battery backup or solar power, check battery terminals for corrosion and ensure batteries are adequately charged.
- Safety Device Test: Periodically test all safety devices, such as photo eyes, to ensure they are functioning correctly.

Sorun giderme
- Gate Not Moving: Check power supply, remote control battery, and ensure the manual release is fully engaged/disengaged. Inspect for obstructions.
- Gate Stops Mid-Cycle: This could indicate an obstruction, a faulty safety sensor (photo eye), or incorrect limit switch settings.
- Uzaktan Kumanda Çalışmıyor: Replace remote battery, re-program the remote if necessary, or check for signal interference.
- Sıradışı Sesler: Inspect the chain for proper tension and lubrication. Check for any loose parts or debris in the mechanism.
- Gate Opens/Closes Partially: Re-adjust the limit switch magnets to ensure they are correctly positioned for the full open and close cycles.
For more detailed troubleshooting, refer to the complete instruction manual or contact TOPENS customer support.
Özellikler
| Özellik | Şartname |
|---|---|
| Üretici | TOPLAR |
| Parça Numarası | DKC1000 |
| Ürün Ağırlığı | 54.9 pound |
| Ürün Boyutları | 15.79 x 9.72 x 22.24 inç |
| Ürün Model Numarası | DKC1000 |
| Cilttage | 24 Volt |
| Netage | 350 watt |
| Beygir gücü | 0.50 beygir |
| Ses Seviyesi | 50 Desibel |
| Piller Dahil Mi? | Evet |
| Pil Gerekli Mi? | Evet |
| Pil Hücresi Tipi | Lityum Metal |
| İlk Mevcut Tarih | 24 Ağustos 2018 |

Garanti ve Destek
The TOPENS DKC1000 comes with a 12-month warranty. TOPENS also provides free customer support.
For technical assistance, troubleshooting, or warranty claims, please contact TOPENS customer support.
Visit the official TOPENS webEk kaynaklar ve iletişim bilgileri için site: www.topens.com







