1. Ürün Bittiview
The EPEVER Tracer4210AN-G3 is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This model supports both 12V and 24V battery systems automatically and is compatible with various battery types, including lead-acid and lithium-ion.
This package includes the Tracer4210AN-G3 controller, an MT52 remote meter for monitoring and parameter setting, and a temperature sensor cable (RTS300R47K3.81A) for accurate temperature compensation.
2. Temel Özellikler
- Ultra hızlı izleme hızı ve garantili izleme verimliliği.
- Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time.
- Compatible with lead-acid (Sealed, Gel, Flooded, User) and lithium-ion (LiFePO4, Li(NiCoMn)O2, User) batteries.
- Ortak negatif topraklama tasarımı.
- Rated charge current: 40A.
- Max. PV input power: 520W (12V battery) / 1040W (24V battery).
- Maks. PV açık devre hacmitage: 100VDC.
- Otomatik 12V/24V sistem ses seviyesitage tanıma.
- Auto-saving function with two voltage disconnect levels.
- Şarj gücü ve akım sınırlama fonksiyonu.
- Bağımsız cilttage düzenleme sabiti hacimtage çıkış fonksiyonu.
- Battery temperature compensation function (for lead-acid batteries).
- Aşırı ısınma durumunda güç azaltma fonksiyonu.
- MT52 Remote Meter for real-time data display, alarm information, and diversified load control modes.
3. Paket İçeriği
Ürün paketi genellikle aşağıdaki öğeleri içerir:
- 1 x Tracer4210AN-G3 MPPT Solar Charge Controller
- 1 x Remote Meter MT52
- 1 x Temperature Sensor Cable (RTS300R47K3.81A)
- 1 x RS485 Kablosu
- 2 x User Manuals (one for controller, one for MT52)
4. Kurulum Talimatları
Always Connect the Battery First!
Please read the complete installation instructions to familiarize yourself with the installation steps before proceeding. Do not use electric screwdrivers for connections.
4.1. Kablolama Şeması
The diagram above illustrates the typical system connection. Ensure all components are connected in the correct order to prevent damage.
4.2. Bağlantı Adımları
- Pili bağlayın: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -).
- Yükü Bağla: DC yükü şarj kontrol cihazına bağlayın.
- Connect Solar Panel (PV Array): Connect the solar panel to the charge controller last.
4.3. Disconnection Steps
Sistemi devre dışı bırakmak için bağlantı sırasını tersine çevirin:
- Disconnect Solar Panel (PV Array): Disconnect the solar panel first.
- Yükü Kes: Disconnect the DC load.
- Pilin Bağlantısını Kes: Disconnect the battery last.
4.4. Detailed Wiring
Ensure all wires are securely fastened in their respective terminals. The controller features terminals for Solar Panel (10mm²/8AWG), Battery (10mm²/8AWG), and Load (10mm²/8AWG).
4.5. Connecting Remote Meter (MT52)
The MT52 remote meter connects to the COM port on the charge controller using an RS485 cable. This allows for remote monitoring and parameter adjustments.
4.6. Connecting to PC for Monitoring
For advanced monitoring and parameter setting, the controller can be connected to a PC using a CC-USB-RS485-150U cable. This allows access to the EPEVER PC software for detailed system analysis.
5. Kullanım Talimatları
5.1. LCD Ekran Üzerindeview
The controller features an LCD display for real-time monitoring of system status and parameters. Use the 'SELECT' and 'ENTER' buttons to navigate through the menus.
5.2. Pil Türünün Ayarlanması
The controller supports various battery types. To set the battery type:
- Press the "ENTER" button and hold for 5 seconds under the battery voltage arayüzü.
- Press the "SELECT" button when the battery type interface is flashing to cycle through options (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
- Press the "ENTER" button to confirm the battery type.
For lithium batteries, specific series configurations are available (e.g., LiFePO4 4s/8s, Li(NiCoMn)O2 3s/6s).
5.3. Setting Load Working Mode
The MT52 remote meter allows for diversified load control modes:
- Manuel Kontrol
- Işık AÇIK/KAPALI
- Işık AÇIK + Zamanlayıcı
- Zaman Kontrolü
Refer to the MT52 User Manual for detailed instructions on setting these modes.
5.4. Setting Battery Parameters (via MT50/MT52)
For advanced battery parameter settings, use the MT50/MT52 remote meter. Navigate to 'Control Para.' in the menu interface. You can adjust parameters such as Over Voltage Disconnect, Charging Limit, Equalize Charging, Boost Charging, Float Charging, Low Voltage Reconnect, and Discharge Limit. When setting parameters for 'USER' battery type, ensure the voltage parameters follow the specified logic (e.g., Over Voltage Ses Bağlantısını Kestage > Şarj Sınırı Hacmitage).
6. Özellikler
| Parametre | Değer |
|---|---|
| Anma Şarj Akımı | 40A |
| Sistem Hacmitage | 12V/24V Otomotiv Çalışması |
| Maksimum PV Giriş Gücü (12V) | 520W |
| Maksimum PV Giriş Gücü (24V) | 1040W |
| Maks. PV Açık Devre Hacmitage | 100VDC |
| Pil Hacmitage Aralık | 8V~32V |
| Terminal Boyutu | 6AWG (16mm²) |
| Boyutlar (U*G*Y) | 252 x 180 x 63mm (9.92 x 7.09 x 2.48 inç) |
| Net ağırlığı | 1.65kg (3.64 lbs) |
| Görüntü Türü | LCD |
| Malzeme | Lithium (compatible) |
7. Elektronik Korumalar
The Tracer4210AN-G3 controller includes multiple electronic protections to ensure safe operation:
- PV Aşırı Akım/Güç
- PV Kısa Devre
- PV Ters Polarite
- Gece Ters Şarj
- Pil Ters Polaritesi
- Pil Aşırı Hacmitage
- Pil Aşırı Deşarj
- Pil Aşırı Isınması
- Denetleyici Aşırı Isınma
- Lityum Pil Düşük Sıcaklık
- Yük Kısa Devre
- Aşırı Yük
- TVS Yüksek Sestage Geçici olaylar
8. Sorun Giderme
If you encounter issues with your EPEVER MPPT Solar Charge Controller, consider the following:
- Ekran/Güç Yok: Ensure the battery is correctly connected and has sufficient voltage. Check all wiring for loose connections or incorrect polarity.
- Şarj Yok: Verify solar panel connections and ensure adequate sunlight. Check PV input voltage and current on the display. Confirm battery type settings are correct.
- Yük Çalışmıyor: Check load connections and ensure the load is not overloaded or short-circuited. Verify load control mode settings on the MT52.
- Anormal Okumalar: Ensure temperature sensor is correctly connected and not damaged. Check communication cables for secure connections.
For persistent issues, refer to the detailed troubleshooting section in the full user manual or contact EPEVER technical support.
9. Destek Bilgileri
For technical assistance, product inquiries, or warranty claims, please contact EPEVER's authorized sales agent, Goland Century. They offer free technical support and have service centers in various regions.
İletişim Bilgileri:
- Teknik Destek: Available through Goland Century technicians.
- Yazılım indir: EPEVER PC software can be downloaded from the official EPEVER webalan.
Please refer to the official EPEVER website or your product documentation for the most up-to-date contact details and support resources.
