1. Giriş
The PROEL V10PLUS is a high-performance, bi-amplified 2-way monitor speaker designed for professional audio applications. It integrates a powerful 600W Class D + AB amplifier with Switch-Mode Power Supply (SMPS) technology, ensuring efficient and clear sound reproduction. Its lightweight, reinforced polypropylene cabinet and ergonomic handle provide excellent portability, while its trapezoidal shape allows for versatile use as a stage monitor or for fixed installations.
2. Temel Özellikler
- ikiamplified 2-way design: Features a 1-inch neodymium compression driver and a 10-inch woofer with a 2-inch voice coil.
- Güçlü Ampaçıklama: 600W total power (Class D + AB amplifier with SMPS).
- Integrated Active Processor: Includes a dual LIMITER circuit for undistorted sound even at high levels.
- Çok Yönlü Girişler: MIC/LINE input with two-band EQ for flexible audio source connection.
- Durum Göstergeleri: Front LED for power (ON) and signal/clip indication.
- Yüksek Çıktı: Maximum SPL of 123dB.
- Geniş Frekans Yanıtı: 60Hz - 20kHz.
- Dayanıklı ve Taşınabilir Tasarım: Ultralight reinforced polypropylene cabinet with a comfortable carry handle.
- Esnek Yerleştirme: Trapezoidal shape for use as a stage monitor and four M10 suspension points for installation.
- Kompakt ve Hafif: Product dimensions of 25 x 35 x 30 cm and a total weight of 10 kg.
3. Kurulum
Proper setup ensures optimal performance and longevity of your PROEL V10PLUS speaker. Follow these steps for initial configuration:
3.1 Paketin Açılması ve Muayene
Hoparlörü ambalajından dikkatlice çıkarın. Taşıma sırasında oluşmuş olabilecek herhangi bir hasar belirtisi için cihazı inceleyin. İlerideki taşıma veya saklama için orijinal ambalajı saklayın.
3.2 Yerleştirme
The V10PLUS is designed for various applications:
- Zemin Monitörü: Position the speaker on the floor using its angled profile s içintage izleme.
- Hoparlör Standı: Utilize the integrated pole mount socket on the bottom of the speaker to mount it on a standard speaker stand.
- Askıya alma: Use the four M10 suspension points for fixed installations. Ensure proper rigging hardware and safety procedures are followed by qualified personnel.
Figure 3.2.1: PROEL V10PLUS in stage monitor position.
3.3 Bağlantılar
Refer to the rear panel image for connection points.
Şekil 3.3.1: Arka panel bağlantıları ve kontrolleri.
- Güç Bağlantısı: Connect the supplied AC power cable to the POWER input on the rear panel and then to a suitable electrical outlet. Ensure the voltage matches the speaker's requirements (220-240V~ 50/60Hz).
- Ses Girişi: Connect your audio source (mixer, microphone, instrument) to the INPUT section. The V10PLUS features a combo XLR/TRS input.
- For microphone signals, use the MIC/LINE switch to select 'MIC'.
- For line-level signals (e.g., from a mixer), select 'LINE'.
- Bağlantı Çıkışı: The LINK output (XLR) allows you to send the input signal to another V10PLUS speaker or another audio device.
4. Kullanım Talimatları
Once connected, follow these steps to operate your PROEL V10PLUS speaker:
- Güç Açık: Ensure all connections are secure and the LEVEL knob is set to minimum. Flip the POWER switch to the 'ON' position. The front LED will illuminate to indicate power.
- Giriş Seçimi: Set the MIC/LINE switch according to your input source (MIC for microphones, LINE for line-level devices).
- Ses Ayarı: Slowly increase the LEVEL knob to achieve the desired volume. Monitor the front LED: it should primarily show 'SIGNAL' (green). If it frequently shows 'CLIP' (red), reduce the input level from your source or the speaker's LEVEL knob to prevent distortion.
- Ton Kontrolü: Use the HIGH and LOW EQ knobs to adjust the treble and bass frequencies to suit your preference or acoustic environment.
- Kapat: Before disconnecting power or cables, turn the LEVEL knob to minimum and then flip the POWER switch to 'OFF'.
5. Bakım
Regular maintenance helps preserve the performance and appearance of your speaker.
- Temizlik: Use a soft, dry cloth to clean the cabinet. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes.
- Izgara Temizliği: The metal grille can be gently cleaned with a soft brush or vacuum cleaner to remove dust.
- Depolamak: When not in use for extended periods, store the speaker in a dry, cool place, ideally in its original packaging or a protective cover, away from direct sunlight and extreme temperatures.
- Kablo Denetimi: Periodically check all power and audio cables for any signs of wear, cuts, or damage. Replace damaged cables immediately.
Caution: Do not attempt to open the speaker cabinet. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
6. Sorun Giderme
This section addresses common issues you might encounter with your PROEL V10PLUS speaker.
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Güç Yok | Power cable disconnected; Power switch OFF; No power from outlet. | Ensure power cable is securely connected. Turn POWER switch ON. Test outlet with another device. |
| Ses Yok | Input cable disconnected/faulty; LEVEL knob at minimum; Incorrect MIC/LINE selection; Source device muted/off. | Check input cable connections. Increase LEVEL knob. Verify MIC/LINE switch setting. Ensure audio source is active and sending signal. |
| Bozuk ses | Input signal too high (clipping); LEVEL knob too high; Faulty cable. | Reduce input gain from source. Reduce speaker's LEVEL knob (if CLIP LED is active). Try a different input cable. |
| Uğultu/Vızıltı Sesi | Topraklama döngüsü; Arızalı kablo; Diğer elektronik cihazlardan kaynaklanan parazit. | Ensure all equipment is on the same electrical circuit. Try different cables. Move speaker away from other electronic devices. |
If the problem persists after trying these solutions, please contact PROEL customer support or an authorized service center.
7. Özellikler
Detailed technical specifications for the PROEL V10PLUS speaker:
| Özellik | Şartname |
|---|---|
| Model Numarası | V10PLUS |
| Üretici | PROEL |
| Hoparlör Tipi | 2 yollu Bi-amplified Monitor Speaker |
| Maksimum Çıkış Gücü | 600 Vat |
| Frekans Tepkisi | 60Hz - 20kHz |
| Bağlantı Teknolojisi | Kablolu |
| Ses Çıkışı Modu | Stereo |
| Ürün Boyutları (U x G x Y) | 25x35x30 cm |
| Ürün Ağırlığı | 10 Kilogram |
| Renk | Siyah |
| Malzeme | Plastik, Alüminyum |
| Önerilen Uygulamalar | Müzik |
| Uyumlu Cihazlar | Television, Tablet, Personal computer, Smartphone |
| Çevresel Ses Yapılandırması | 2.0 |
| Su geçirmez | HAYIR |
| Montaj Tipi | Wall Mount (also supports suspension via M10 points and floor monitor use) |
| Özel Özellikler | 2 yönlü çiftamplifier 600 W class D + AB with SMPS |
8. Garanti ve Destek
8.1 Garanti Bilgileri
This PROEL V10PLUS speaker comes with an extended warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official PROEL webYetkili satıcınızla iletişime geçin veya siteyi ziyaret edin. Satın alma belgenizi garanti talepleriniz için saklayın.
8.2 Müşteri Desteği
For technical assistance, service, or spare parts, please contact PROEL customer support. You can find contact information and additional resources, including FAQs and product documentation, on the official PROEL webalan (www.proel.com). Please have your product model number (V10PLUS) and serial number ready when contacting support.
