giriiş
This manual provides essential information for the safe and effective operation, maintenance, and care of your Makita DTD 153 ZJ 18V Battery-Powered Brushless Impact Wrench. Please read and understand all instructions before use to ensure optimal performance and user safety. The tool is designed for driving screws into wood, metal, and plastic materials.
Temel Özellikler
- Fırçasız Motor: Arttırılmış güç, verimlilik ve daha uzun takım ömrü sağlar.
- Kompakt Tasarım: Short design of only 138 mm for improved maneuverability in tight spaces.
- Ergonomik Sap: Perfectly shaped for comfortable grip and reduced user fatigue.
- Entegre LED Aydınlatma: Illuminates the work area for enhanced visibility in dimly lit conditions.
- Sağlam Yapı: Features protective caps on the housing and rubber seals for dust and splash water resistance, ensuring durability.
- Değişken Hız: Allows for precise control over fastening applications.
Figure 1: The Makita DTD 153 ZJ 18V Brushless Impact Wrench, shown with a compatible 18V battery (not included with solo unit).
Kurmak
- Pil Montajı: Ensure the battery is fully charged. Align the battery with the tool's battery port and slide it in until it clicks securely into place. To remove, press the release button on the battery and slide it out.
- Bit Kurulumu: Pull the bit holder collar forward. Insert the desired 1/4" hex shank bit into the holder. Release the collar to lock the bit in place. Gently pull on the bit to ensure it is securely fastened.
- Kayış Bağlantısı: If desired, attach the wrist strap to the designated loop on the tool's base for added security during operation.
Video 1: A demonstration of handling and basic setup for a cordless impact wrench, including battery insertion and bit attachment.
Kullanım Talimatları
- Güç Açma/Kapatma: The tool is activated by pressing the trigger switch. The speed increases with increased pressure on the trigger.
- Dönüş Yönü: Use the forward/reverse switch located above the trigger to select the desired rotation direction for tightening or loosening screws.
- LED Çalışma Işığı: The integrated LED light automatically illuminates when the trigger is pressed, providing visibility to the work area.
- Sabitleme Vidaları: Position the bit on the screw head. Apply firm, steady pressure and press the trigger. The impact mechanism will engage as resistance increases, driving the screw efficiently.
Şekil 2: Yakın çekim view of the integrated LED work light on the Makita DTD 153 ZJ, which illuminates the fastening area.
Bakım
- Temizlik: Aletin dış yüzeyini yumuşak bir bezle düzenli olarak temizleyin.amp bez. Sert kimyasallar veya aşındırıcı temizleyiciler kullanmayın.
- Havalandırma Açıklıkları: Aşırı ısınmayı önlemek için havalandırma açıklıklarını toz ve döküntülerden uzak tutun.
- Pil Bakım: Store batteries in a cool, dry place. Do not expose them to extreme temperatures or moisture. Charge batteries fully before storage and periodically during long storage periods.
- Denetleme: Periodically inspect the tool for any signs of damage, loose screws, or worn parts. Contact authorized service personnel for repairs.
Sorun giderme
- Araç Başlamıyor: Ensure the battery is fully charged and properly inserted. Check the forward/reverse switch is not in the neutral (locked) position.
- Azaltılmış Güç: A low battery charge can cause reduced power. Recharge the battery. Ensure the correct bit is used for the application.
- Aşırı Isınma: If the tool overheats, stop use immediately and allow it to cool down. Check ventilation openings for blockages. Avoid continuous heavy-duty use without breaks.
- Bit Not Holding: Ensure the bit is correctly inserted into the 1/4" hex chuck and the collar is fully released to lock it.
Özellikler
| Özellik | Şartname |
|---|---|
| Model Numarası | DTD 153 ZJ |
| Marka | Makita |
| Güç Kaynağı | Pil ile çalışır (18V) |
| Maksimum Tork | 165 Nm (Hard) / 170 Nm |
| Alet Tutucu | 1/4" Altıgen |
| Boşta Hız | 0-2900 dk-1 |
| Idle Impact Rate | 0-3500 dk-1 |
| Tightening Capacities (Machine Screws) | 4-8 mm |
| Tightening Capacities (Standard Screws) | 5-16 mm |
| Tightening Capacities (HV Screws) | 5-12 mm |
| Boyutlar (U x G x Y) | 137x79x238 mm |
| Ağırlık (pil hariç) | 0.97 kilo |
| Ses Basınç Seviyesi | 93 dB(A) |
| Ses Gücü Seviyesi | 104 dB(A) |
| Vibration Emission (Impact Screws) | 10.5 m/s² |
| Malzeme | Plastik |
Garanti ve Destek
Makita power tools are engineered for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Makita website. For technical support, service, or to locate an authorized service center, please contact Makita customer service or consult the contact information provided in your product packaging.
Garanti kapsamındaki talepleriniz için satın alma belgenizi saklayın.