1. Giriş
This manual provides essential information for the proper setup, operation, and maintenance of your Minelab GO-FIND 22 Ultra-Light Collapsible Metal Detector. Designed for ease of use and portability, the GO-FIND 22 is suitable for various treasure hunting environments. Please read these instructions carefully before using your device to ensure optimal performance and longevity.
Image 1.1: The Minelab GO-FIND 22 Metal Detector in its assembled state.
2. Güvenlik Bilgileri
- Özel mülklerde tespit işlemi yapmadan önce daima izin alın.
- Be aware of local regulations regarding metal detecting in public areas.
- Kazı yaparken yer altı tesisatlarına veya tarihi eserlere zarar vermemek için dikkatli olun.
- The search coil is waterproof, but the control unit is not. Do not submerge the control unit.
- Keep batteries out of reach of children. Dispose of batteries responsibly.
3. Paket İçeriği
Upon unpacking your Minelab GO-FIND 22, please verify that all components are present:
- Minelab GO-FIND 22 Metal Detector (main unit with integrated search coil)
- Camouflage Skins (2 sets)
- Kullanım Kılavuzu (bu belge)
Image 3.1: Contents of the Minelab GO-FIND 22 package, including the detector and two camouflage skins.
4. Kurulum
4.1 Assembly and Unfolding
The GO-FIND 22 features a collapsible design for easy transport. To unfold and assemble:
- Gently pull the search coil section away from the control unit until the shaft extends fully.
- Ensure the locking mechanisms click into place, securing the shaft.
- Adjust the armrest for comfortable use.
Image 4.1: The Minelab GO-FIND 22 in its compact, folded position, ready for transport.
4.2 Pil Kurulumu
The GO-FIND 22 requires 4 AA batteries (not included). To install:
- Locate the battery compartment on the back of the control unit.
- Pil kapağını açın.
- 4 adet AA pili, kutupların doğru olmasına dikkat ederek (+/-) takın.
- Pil kapağını sıkıca kapatın.
Resim 4.2: Arka view of the control unit, indicating the location for battery access.
4.3 Applying Camouflage Skins
Personalize your detector with the included peel-and-stick camouflage skins:
- Ensure the detector's shaft is clean and dry.
- Carefully peel the backing from the chosen skin.
- Align the skin with the shaft and press firmly to apply, smoothing out any bubbles.
5. Kullanım Talimatları
5.1 Açma/Kapatma
Press and hold the power button (usually the central button with a magnifying glass icon) until the display illuminates to turn on the detector. Repeat the action to power off.
5.2 Ekranı Anlamak
The GO-FIND 22 features a clear display with icons indicating potential target types and signal strength.
- Target Icons: Icons such as a horseshoe (iron), coin, or ring will flash to suggest the type of metal detected.
- Sinyal Gücü: Bars on the display indicate the strength of the detected signal, helping to pinpoint the target's location and depth.
- Pil Göstergesi: Kalan pil ömrünü gösterir.
Image 5.1: The control panel and display of the GO-FIND 22, showing target icons and control buttons.
5.3 Modları Bul
The GO-FIND 22 offers 2 preset find modes to optimize detection for different target types:
- Mod 1: Detects all metal types, including iron.
- Mod 2: Discriminates against iron, focusing on non-ferrous metals like coins and jewelry.
Use the mode selection button (refer to the display image) to switch between these modes.
5.4 Hassasiyet Ayarı
Adjust the detector's sensitivity using the '+' and '-' buttons on the control panel. There are 3 levels of sensitivity:
- Düşük Hassasiyet: Reduces interference in highly mineralized ground or areas with a lot of trash.
- Orta Hassasiyet: Standard setting for general detecting.
- Yüksek Hassasiyet: Increases detection depth and sensitivity to small targets, but may also pick up more ground noise.
5.5 Using the Waterproof Coil
The 8-inch search coil is waterproof, allowing for detection in shallow water, such as beaches or stream beds. Ensure the control unit remains dry and above water at all times.
5.6 Detection Tips
- Sweep the coil slowly and steadily from side to side, keeping it parallel to the ground.
- Overlap your sweeps by about half the coil's width to ensure thorough coverage.
- When a target is detected, narrow your sweep pattern to pinpoint the exact location.
Video 5.2: An official Minelab video demonstrating the GO-FIND series in action, highlighting its use in various outdoor environments.
6. Bakım
6.1 Temizlik
- Her kullanımdan sonra dedektörü bir bezle silin.amp Kir ve döküntüleri temizlemek için kullanılan bez.
- For the waterproof coil, rinse with fresh water if used in saltwater environments.
- Dedektörün hiçbir parçasında aşındırıcı temizleyiciler veya çözücüler kullanmayın.
6.2 Pil Bakımı
- Dedektör uzun süre kullanılmayacaksa, sızıntıyı önlemek için pilleri çıkarın.
- Replace all batteries at the same time with new ones. Do not mix old and new batteries.
6.3 Depolama
Store the GO-FIND 22 in a cool, dry place, away from direct sunlight and extreme temperatures. Its collapsible design allows for compact storage.
7. Sorun Giderme
| Sorun | Olası Neden | Çözüm |
|---|---|---|
| Dedektör açılmıyor. | Bitmiş veya yanlış takılmış piller | Pilleri yeni AA pillerle değiştirin, kutupların doğru olmasına dikkat edin. |
| Constant false signals or chatter | High sensitivity setting, electromagnetic interference, highly mineralized ground | Reduce sensitivity. Move away from power lines or other electronic devices. Try a different search area. |
| Zayıf tespit derinliği | Low sensitivity setting, incorrect sweep technique | Increase sensitivity. Ensure slow, even sweeps with the coil parallel to the ground. |
| No audio response | Volume too low, speaker obstruction | Increase volume using the '+' button. Check for any obstructions on the speaker. |
8. Özellikler
| Özellik | Detay |
|---|---|
| Marka | MİNELAB |
| Model Numarası | 3231-0013 |
| Çalışma Frekansı | 12 KHz |
| Arama Bobini Boyutu | 8 inç |
| Su Geçirmezlik Derecesi | IP54 (Search Coil Only) |
| Güç Kaynağı | 4 adet AA pil (gerekli) |
| Ürün Ağırlığı | 2.2 Pound (1 kg) |
| Ürün Boyutları (U x G x Y) | 22.44" x 7.32" x 3.94" |
| Malzeme | Polikarbonat (PC) |
| Ayarlanabilir Uzunluk | Evet |
| Önerilen Kullanım | Metal Algılama |
| UPC | 811493016634 |
9. Garanti Bilgileri
Minelab products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Minelab webSite. Satın alma belgenizi herhangi bir garanti talebi için saklayın.
10. Destek
For further assistance, technical support, or to purchase accessories, please visit the official Minelab webDaha fazla bilgi ve ürün için web sitelerini ziyaret edebilir veya müşteri hizmetleri departmanıyla iletişime geçebilirsiniz. MINELAB Mağazası Amazon'da.
