Trident BP1240-3A Akıllı Pil Şarj Cihazı Kullanım Kılavuzu

1. Giriş

This manual provides essential information for the safe and efficient operation of your Trident BP1240-3A Smart Battery Charger. Designed for mobile and maritime applications, this charger ensures continuous and optimized battery charging, extending battery life. Please read this manual thoroughly before installation and use.

2. Güvenlik Talimatları

• Always disconnect AC power before making or breaking battery connections.
• Ensure adequate ventilation around the charger to prevent overheating.
• Şarj cihazını yağmura, neme veya aşırı toza maruz bırakmayın.
• This charger is designed for 12V lead-acid batteries. Do not attempt to charge other battery types unless explicitly supported by the manufacturer.
• Pil terminallerinde kısa devre yapmaktan kaçının.
• Şarj cihazını yalnızca amacına uygun şekilde kullanın.
• Çocukların erişemeyeceği yerde saklayınız.

3. Paket İçeriği

Paketinizde tüm öğelerin mevcut olduğundan emin olun:

• Trident BP1240-3A Smart Battery Charger
• Temperature Sensor with 1.5m Cable
• Kullanım Kılavuzu (bu belge)

4. Ürün Özellikleri

• Çıktı: 12V/40A with 3 independent DC outputs.
• Şarj Algoritması: Gelişmiş 6-stage charging process (Soft start, Main charge, Compensation, Absorption, Floating, Recycling) for optimal battery health.
• Sıcaklık Telafisi: Automatic temperature regulation function when the external temperature sensor is connected.
• Soğutma: Fan with automatic start/stop functionality for efficient cooling.
• Koruma: Fully protected with PCB coating, short-circuit protection, reverse polarity protection, over-temperature protection for charger and battery, and over-voltage koruma.
• Tasarım: IP20 rated, marine design suitable for various applications.

5. Ürün Bittiview

Familiarize yourself with the charger's components and indicators.

Şekil 1: Front panel and connection diagram of the Trident BP1240-3A charger.

• LED Göstergeleri: Power, Charging, Charged, Reverse Polarity/Error.
• DIP Anahtarları: Used for configuring work mode and battery type. Refer to the full technical manual for specific settings.
• Ana şalter: Güç AÇMA/KAPAMA anahtarı.
• AC Power Cord Input: Connects to mains power (185-265VAC 50Hz).
• BAT - (Negative): Common negative terminal for all batteries.
• BAT + (Nr.1), BAT + (Nr.2), BAT + (Nr.3): Positive output terminals for connecting up to three separate battery banks.

Şekil 2: Ön view of the Trident BP1240-3A charger, showing LED indicators and general design.

Şekil 3: Included temperature sensor for automatic battery temperature compensation.

6. Kurulum ve Kurulum

6.1 Montaj

Mount the charger in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient space around the unit for airflow, especially around the cooling fins and fan grille. The charger can be mounted horizontally or vertically.

6.2 Pillerin Bağlanması

1. Ensure the charger's main switch is OFF and the AC power cord is disconnected.
2. Connect the negative terminal of your battery bank(s) to the common BAT - terminal on the charger.
3. Connect the positive terminal of your first battery bank to BAT + (Nr.1).
4. If charging additional battery banks, connect their positive terminals to BAT + (Nr.2) and BAT + (Nr.3) respectively.
5. Tüm bağlantıların sağlam ve korozyonsuz olduğundan emin olun.

6.3 Connecting Temperature Sensor

Connect the provided temperature sensor to the designated port on the charger. Place the sensor on or near one of the batteries being charged to allow for accurate temperature compensation, which optimizes charging voltage pil sıcaklığına göre.

6.4 AC Gücünü Bağlama

Connect the AC power cord to the charger's AC input. Then, plug the other end into a suitable mains power outlet (185-265VAC 50Hz).

6.5 DIP Anahtarı Yapılandırması

The DIP switches on the charger's front panel are used to select the charging profile and battery type. Refer to the detailed instructions in the complete technical manual for the correct DIP switch settings for your specific battery type (e.g., Gel, AGM, Flooded).

7. Kullanım Talimatları

7.1 Açma

After all connections are made and verified, switch the main power switch on the charger to the 'ON' position. The 'Power' LED should illuminate.

7.2 Şarj İşlemi

The Trident BP1240-3A utilizes a 6-stage şarj algoritması:

1. Yumuşak Başlangıç: Gently introduces current to deeply discharged batteries.
2. Main Charge (Bulk): Delivers maximum current to rapidly bring the battery to approximately 80% charge. The 'Battery Charging' LED will be active.
3. Tazminat: Further charges the battery to a higher voltage to ensure full capacity.
4. Emilim: Charges the battery to 100% by gradually reducing current while maintaining a constant voltage. The 'Battery Charging' LED will remain active.
5. Yüzer: Maintains the battery at a safe voltage to prevent self-discharge, keeping it fully charged. The 'Battery Charged' LED will illuminate.
6. Geri dönüşüm: Periodically re-applies a higher charge if the battery voltage drops, ensuring optimal long-term maintenance.

7.3 LED Göstergeleri

• Güç LED'i: Indicates the charger is receiving AC power.
• Battery Charging LED: Illuminates during the bulk and absorption stagee.
• Battery Charged LED: Illuminates when the battery is fully charged and in float mode.
• Error/Reverse Polarity LED: Illuminates to indicate a fault condition, such as reverse polarity connection or other system errors.

8. Bakım

• Regularly inspect all cables and connections for wear, damage, or corrosion.
• Keep the charger's exterior clean and free from dust. Use a soft, dry cloth.
• Ensure the cooling fan and vents are unobstructed.
• Şarj aletinin kapağını açmayın.asing; İçerisinde kullanıcının müdahale edebileceği herhangi bir parça bulunmamaktadır.

9. Sorun Giderme

• Şarj cihazı açılmıyor: Check AC power connection and mains supply. Ensure the main switch is ON.
• Error LED illuminated:
  • Ters kutup: Disconnect AC power, correct battery connections (positive to positive, negative to negative), then reconnect.
  • Pil Aşırı Hacmitage: Charging will not start if battery voltage is above 15.0 VDC. Check battery condition.
  • Charger Over-Temperature: Ensure adequate ventilation. The charger will reduce output power or shut down if it overheats.
  • Battery Over-Temperature: If the connected temperature sensor detects battery temperature above 50°C, the charger will shut down. Allow the battery to cool.
  • Short Circuit at Output: Disconnect AC power, check battery connections for short circuits, then reconnect.
• Pil şarj olmuyor: Verify all connections, check DIP switch settings for correct battery type, and ensure the battery is not severely damaged.

10. Özellikler

11. İsteğe bağlı aksesuarlar

The following accessories are available separately to enhance the functionality of your Trident BP1240-3A charger:

Şekil 4: Optional remote control units (LCD and LED displays) for monitoring charger status.

• RC: LCD Remote Control: Features an LCD screen, displays charging status and system status, includes a 1.5m cable.
• RD: LED Remote Display: Features LED alarms, displays charging status and system status, includes a 1.5m cable.

Note: RC and RD units are optional accessories and must be purchased separately.

12. Garanti Bilgileri

For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact Trident customer support directly. Keep your proof of purchase for warranty claims.

13. Müşteri Desteği

If you encounter any issues or have questions not covered in this manual, please contact Trident customer support. Contact information can typically be found on the manufacturer's websitede veya ürün ambalajında ​​yer almamaktadır.