1. Giriş
This manual provides instructions for the proper setup, operation, and maintenance of your HOLOSUN HE403B-GR / HS403B 2 MOA Green Dot Micro Sight. Please read this manual thoroughly before using the device to ensure safe and effective operation.
Resim 1.1: Ön view of the HOLOSUN HE403B-GR Micro Sight.
2. Paket İçeriği
Paketin içinde tüm öğelerin mevcut olduğundan emin olun:
- HOLOSUN HE403B-GR / HS403B Micro Sight
- Lower 1/3 Co-witness Mount (1.63")
- Low Mount (0.75")
- CR2032 Batarya
- T10 L Key
- Lens Bezi
- Rubber Lens Cover
3. Kurulum
3.1. Pil Kurulumu
- Unscrew the battery tray cover located on the side of the sight using the provided T10 L key.
- CR2032 pili pozitif (+) tarafı yukarı bakacak şekilde yerleştirin.
- Securely replace the battery tray cover.
3.2. Nişangahın Montajı
The sight includes two mounts: a lower 1/3 co-witness mount (1.63") and a low mount (0.75"). Choose the appropriate mount for your rifle or carbine application.
- Attach the desired mount to the bottom of the sight using the provided screws.
- Place the sight assembly onto your firearm's Picatinny or Weaver rail.
- Tighten the mount's cross bolt or quick-release lever to secure the sight firmly to the rail. Ensure it is stable and does not wobble.
Resim 3.1: Açısal view of the HOLOSUN HE403B-GR Micro Sight, demonstrating its compact size.
4. Kullanım Talimatları
4.1. Açma/Kapama ve Parlaklık Ayarı
- Güç Açık: Press either the '+' or '-' button to turn on the sight.
- Parlaklık Ayarı: Use the '+' button to increase brightness and the '-' button to decrease brightness. There are 12 brightness settings: 10 for daylight and 2 for night vision compatibility.
- Kapat: Press and hold the '+' button for 3 seconds to turn off the sight.
4.2. Shake Awake Technology
The sight features Shake Awake technology to conserve battery life. When the optic detects no motion for a set period (default is 10 minutes), the LED will automatically deactivate. The slightest movement of the optic will instantly reactivate the LED to its last used brightness setting.
Image 4.1: Explanation of Shake Awake Technology.
4.3. Windage and Elevation Adjustment
The windage and elevation adjustments are located on the top and right side of the sight, respectively. Each click adjusts the point of impact by 0.5 MOA.
- Remove the protective caps from the adjustment turrets.
- Use a flathead screwdriver or the cap itself to turn the adjustment turrets.
- Çevir Yükseklik turret (top) clockwise to move the point of impact down, and counter-clockwise to move it up.
- Çevir rüzgârlanma turret (right side) clockwise to move the point of impact right, and counter-clockwise to move it left.
- After zeroing, replace the protective caps.
Resim 4.2: Yan view of the sight, showing the windage adjustment turret.
4.4. Reticle Information
The HE403B-GR features a 2 MOA Green Dot reticle. The HS403B features a 2 MOA Red Dot reticle. Both models offer a clear, precise aiming point.
Image 4.3: Visual representation of the 2 MOA Green Dot and Red Dot reticles.
5. Bakım
5.1. Temizlik
To maintain optical clarity, regularly clean the lenses with the provided lens cloth. For stubborn smudges, a small amount of lens cleaning solution designed for optics can be used. Avoid using harsh chemicals or abrasive materials.
5.2. Pil Değişimi
Replace the CR2032 battery when the reticle dims significantly or fails to illuminate. Refer to Section 3.1 for battery installation steps.
5.3. Depolama
When not in use, store the sight with the rubber lens cover installed to protect the lenses from dust and scratches. Store in a cool, dry place.
6. Sorun Giderme
If you encounter issues with your HOLOSUN Micro Sight, refer to the following common problems and solutions:
- Reticle Not Visible:
- Check if the sight is powered on.
- Pilinin doğru takıldığından ve yeterli şarjı olduğundan emin olun. Gerekirse değiştirin.
- Adjust brightness settings using the '+' button.
- Reticle Appears Dim or Flickers:
- CR2032 pilini değiştirin.
- Pil temas noktalarının temiz ve korozyonsuz olduğundan emin olun.
- Zero Not Holding:
- Verify that the sight is securely mounted to the firearm rail. Check all screws and mounting hardware.
- Ensure the adjustment turrets are not loose or accidentally moved.
If problems persist after attempting these solutions, please contact HOLOSUN customer support.
7. Özellikler
| Örnek | HE403B-GR (Green Dot) / HS403B (Red Dot) |
| Retikül | 2 MOA Nokta |
| Işık Dalgaboyu | 540nm (Yeşil) |
| Büyütme | 1x |
| Göz Kurtarma | Sınırsız |
| Paralaks | Paralakssız |
| Güç Kaynağı | CR2032 Batarya |
| Pil Ömrü | 50,000 saate kadar |
| Parlaklık Ayarları | 10 Daylight & 2 Night Vision |
| Pencere Boyutu | 20mm Çap |
| Konut Malzemesi | 6061 T6 Alüminyum |
| Tıklama Başına Ayarlama | 0.5 MOA |
| W&E Seyahat Serisi | ±50 MOA |
| Ürün Ağırlığı | 4.32 ons |
| Ürün Boyutları (LxWxY) | 2.44 x 1.18 x 1.45 inç |
| Uyumlu Cihazlar | Air Rifle, Cross Bow, Pistol, Shotgun |
| Montaj Tipi | Standard mount (includes lower 1/3 co-witness and low mounts) |
8. Garanti ve Destek
8.1. Garanti Bilgileri
The HOLOSUN HE403B-GR / HS403B Micro Sight is covered by a Ömür Boyu Garanti. For specific details regarding warranty coverage and terms, please refer to the official HOLOSUN website veya müşteri desteği ile iletişime geçin.
8.2. Müşteri Desteği
For technical assistance, warranty claims, or any other inquiries, please visit the official HOLOSUN webweb sitesini ziyaret edin veya müşteri hizmetleri departmanıyla iletişime geçin. İletişim bilgileri genellikle üreticinin web sitesinde bulunabilir. webalan.
